Maxis 4G apn is what?

max4g

try to download zte mf190 modem bin file from tplink websites and put it in your V2 webinterfaces under 3G/4G

do u set apn?

btw, can mr3420 v1 connect e398 lte? or require buy the v2.

if u flash to mr3420 V1 openwrt barrier breaker, it should be able to dial,..

can you show me which one? there is no mf190 modem for malaysia. i've tried using the egypt one but it still the same. stuck at connecting. bin file

ok, thanks ya.

the apn is correct, i tried let the apn set automatically and also i've tried put it manually. the result is still the same. stuck at connecting.

so after u plug in 3420, it never able to connect ? stuck @ connecting ?

what is your V2 firmware version ? it is the latest ?

if yours is not, try to update your V2 firmware to latest

yup. it never able to connect to internet. on the status page it show connecting only.
and yup. been using the latest firmware also.

This post has been edited by arif48: Apr 11 2013, 09:11 PM

your zte mf190 seem is unlock right ?

what is your zte mf190 firmware version ?



if u want, you can try to flash to openwrt barrier breaker for your mr3420 V2

firmware is at -> http://www.rfactory.org/OpenWRT/index.html

download it @ Experimental BlackWidow Firmware section,.. for your V2,..



This post has been edited by chuahcs79: Apr 11 2013, 09:13 PM

i think it is unlock.
it is digi modem and i'm using celcom simcard. so.. yeah.
i don't know how to check the firmware version.

i don't know, will it solve my problem?

it should be working as auto recognize and dial your modem,..

just set up the wifi, set apn, choose to keep the connection alive with reboot and plug in your zte mf190,.. reboot

then it will do the job

This post has been edited by chuahcs79: Apr 11 2013, 09:25 PM

what's the difference between experimental and the black widow firmware. does the experimental is stable?

experiemental is the latest,.. it works fine for me,.. u should try,..

i can still revert back to official update right?
alrighty then. gonna try to install the experimental one.
wish me luck and thanks a lot!!

make sure u download the latest tplink V2 stock firmware first before u proceed,.

yes you can revert back,..

it is working!!! wooo hooo!! thanks a lot bro!

remember to set the web interface password under adminstrator, and tweak your wifi with Mac address filter and DNS forwarding,.

it should start and dial your zte mf190 in a few second the most,.. superb,.

remember to set keep the connection alive under modem section,..

enjoy