What modem + what speed if using the modem on the PC only and how was the signal

can the mr3420 v2 flash to v1 firmware?
Abit diffrence between unifi v1 and v2 refer from klseet.com

need more info about this , hope someone help on this, may thanks all sifu's

v2 need v2 firmware

iCIC, that mean no tutorial to teach how to config on this v2 on unifi
i followed on the tutorial given by klseet.com for v1 but it's not working.

seem like need buy a new router for Qos Setting

There is a new firmware release for our V1 OpenWRT image.

20/2/13 - A modem data page for capture of modem information. Include QoS package. Additional modems support. Fixed Custom DNS server order. Added the Script Version number to the Modem Connection page to identify the version. Include the 'relayed package' to support Client & Repeater mode.

Modem Gui is the icing on the cake with our version.

Details HERE.

err guys how to reset my router? it seems when using openwrt the reset button wont react

done some reading it has something to do with qss button + reset button for certain model. mostly suggest using winscp to overwrite the firmware file. as currently i cant login to admin panel

anyone can post a guide? or an alternative?

How about below cmd after u telnet/ssh to your router?

mtd -r erase rootfs_data

the QoS pakcages is a thrill

anyone share the bin file again? the link from box has ran out of bandwidth.

btw, does this openwrt support e398?

here -> http://www.mediafire.com/?gr9p7d6ydrrk79u

Hi,
sorry for noob question here.
Does yes wimax dongle works with this device?
thank u

thanks..it works, i've managed to establish internet with e398, however, i'm connecting through WAN interface instead of 3g interface, is this correct.

and my device behind this router cannot ping like google.com and the rest.. firewall setting issue?

either wan or 3G interface is fine,.

hi there

sorry yes go dongle doesn't work with V2

Can we request a feature? Say, the capability force the modem on a certain band like 3G/HSPA only, 900MHz/2100MHz only, etc.

Most certainly!

But it depends on the capabilities of the modem.

Control is achieved via Modem GUI; which works exclusively with our Openwrt version.

Read the Modem GUI Tutorial and the addendum on Custom commands.

It's best to have a play with it and then come back with any specific questions.

Sierra and Huawei modems have the best control.

Caution: If you set a band via Modem Gui; it will immediately send the appropriate AT command to the modem and that state will be set. So if you set '3G only', on a 3G/4G modem, then it won't receive 4G, even if it is removed and put in another device.

You can even select channels within a band (if they are known) via specific AT commands. This was one of the features that initially drove the project.

reply what?

????

Thanks! I shall give it a try.

It's like using the usb modem with a connection manager and a PC ... but the router connection manager is more powerful.



SMS facilities for Modem Gui are coming soon.

PS Make sure that you disconnect and then exit.

Don't close with the red X as it leaves the modem in an unknown state.

PPS You may have to experiment with usb port numbers to find your modems connection port. Usually 1 or 2.

This post has been edited by Wahroonga Farm: Feb 23 2013, 05:57 AM