https://www.facebook.com/HondaCity2014ThailandClub

This morning went to change my tyre, the shop suggest me to change the nut at the chamber as he said it will be great for cornering , anyone experience before ?

This post has been edited by felixfatass: Nov 16 2013, 05:39 PM

Hey, since you brought your own engine oil to service I have a question that is it won't void our car warranty if we not using Honda engine oil?

Finally 20k service on Friday booked appointment on 11am reach on time but due to too many people only done at 4pm wasted all my time just sitting there and wait got nothing to do Changed from 0W-20 to 5W-40 and after 2 days of inspection, the car response get quicker and FC only slightly increase. The response to me is wow but not OMG lol, VTEC kick in more easily compare to last time when I was using 0W-20. Conclusion car response get more instant VTEC kick in easily and FC only get slightly increase.

Between for reference my 20k service include balancing alignment & rotation, 0W-20 engine oil, oil filter, gear oil, air filter and air con filter total RM600++. I removed the aircon filter which already cost RM180 itself, left RM400++ but change from 0W-20 to 5W-40 which the final price is RM500++. Now pocket bleeding already

This post has been edited by JaysonGoh: Nov 17 2013, 03:11 PM

shit my wiper nut cover been stolen...and i realize other honda city parked at the same open carpark all stolen...damn thieve!

Same here, mine got stolen for the second time recently.

I think it's better to get them replace as soon as possible as it's raining everyday lately, else the exposed bolt and nut will get rusted soon.

This post has been edited by hollyfish: Nov 17 2013, 06:24 PM

sry can't answer you that. my car warranty already ended, so i service at outside workshop now

This post has been edited by ZeneticX: Nov 17 2013, 08:04 PM

My latest FC. back to my hometown (70% rural speed + 30% urban)

SHell 95, 550km / 34.5 = 15.94km/l

Hi,

I’m thinking to have 3M carbon fiber vinyl to cover up the mirrors and the black plastic at doors’ edge.

Anyone did this?
Mind to share where to get the genuine 3M vinyl in KL/Selangor?

bro....im parking at the same open parking i think if i replace still will be hilang again =(
only can buy from SC? no other place?

This post has been edited by jenli_84: Nov 18 2013, 09:19 AM

About 70% highway 30% city drive?
What engine oil you are currently using?

I'm on 0W20 now, Shell 95 around 340KM, 11.8km/l, 75% City 25% Highway.
Shell tends to give slight better FC (Around 10-15km more) but can feel the lose of power and torque.

before the 1st service, i was having bad experience with Shell

Thus, i decided to try Shell again after my 1st service (cheapest mineral w30), and i have the same conclusion as you, more mileage at the expense of power/torque

70% , not really full highway, is the coastal road i use back to my hometown, puncak alam- kuala selangor-sekinchan-teluk intan- manjung..if one is familiar with the way. around 15-20 traffic lights total

May I know how many hours to be arrive on your hometown?

I know the road, there have some limit speed especially in Teluk Intan, one road only can speed 60km which I kena before...

You didn't drive on highway when back homwtown? but you can still achieve for good FC oh with these road

My hometown around there and I used to be drive back on highway where exit on Gopeng toll

I plan to do the same but will less noticeable carbon fiber pattern. Maybe something dark. The rubber got all worn out and ugly already due to the long exposure under the sun

Let me know when you've done yours.

Found the source @ https://forum.lowyat.net/topic/1488086

But must be DIY

i usually start early, around 8am. have been driving that route for past 5yrs. no summon..so far
Yes, good FC on that road, that's why on highway, 20km/l is achieveable

i did that around 2 yrs back if not mistaken.. 3M gloss on roof and carbon vinyl at all the plastic in between windows.. all around 500+..

What is the different between "3M gloss" and "3M carbon vinyl"?

Is your 3M sticker still in GOOD condition after 2 years?

Mind to share where you (which shop) did it?

Anyone installed Stiff Ring (http://www.stiffring.com) for your City?

Is it a worth investment?

Please share your thought.

looks very interesting bro.
are you going to install? call when you do le. then we can all see. if worthwhile can nego for bulk