Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
12 Pages  1 2 3 > » Bottom

Outline · [ Standard ] · Linear+

 v8.0 The OFFICIAL 3G/5G Honda City 2011 thread, The new City, where to next?

views
     
winterwish
post Dec 28 2012, 10:54 AM

Getting Started
**
Junior Member
141 posts

Joined: Jan 2003


Congrats on V8 rclxms.gif

Almost 4k for the DVD/Navigation system? A little too expensive I think.. what brand are those? I hope not those 'OEM' one since I'm pretty sure you can get those for under 2K.
winterwish
post Dec 29 2012, 02:12 AM

Getting Started
**
Junior Member
141 posts

Joined: Jan 2003


QUOTE(samwjy @ Dec 28 2012, 07:43 PM)
I am still in the midst of considering to get the City.

If modulo bodykit (PP material) from outside costs around RM1500 cheap or expensive?

And what brand of tinting is good enough? Budget around 1k~2k. Can get Vkool with that price range?
*
A shop here in Nilai quote me 1.4k for the kit (PP material) including paint+installation. So the price should be around that i think, maybe more or less RM100 depending on your place.

Any one downgrade their rim to 15" from 16"?
winterwish
post Dec 30 2012, 12:31 AM

Getting Started
**
Junior Member
141 posts

Joined: Jan 2003


QUOTE(aarex @ Dec 29 2012, 09:43 PM)
Yoo...Juz installed the New City facelift Modulo Trunk Spoiler (Wing type).  laugh.gif  but nd to drill holes... sakit hati...  sad.gif
*
Hehe same as mine, need to drill 4 holes to secure the spoiler, but looks very nice compared to the duck tail one so I wouldn't mind the holes. I got mine installed at Honda, pretty sure warranty is intact. Its the official modulo kit from them after all.


Added on December 30, 2012, 12:31 am
QUOTE(JaysonGoh @ Dec 29 2012, 04:57 PM)
What's the different between ABS and PP modulo body kit? Which one better?
*
PP is better from what I read, its the same material used by the original kit.

This post has been edited by winterwish: Dec 30 2012, 12:31 AM
winterwish
post Dec 30 2012, 11:18 AM

Getting Started
**
Junior Member
141 posts

Joined: Jan 2003


QUOTE(aarex @ Dec 30 2012, 12:58 AM)
Haha! Ya, looks nice n sporty. Actually I planned to install the modulo ducktail spoiler ones but after demo, put on my city both spoilers. I decided to install modulo truck wing type spoiler. smile.gif
Bro, u installed full set modulo bodykits?
*
No, just the spoiler. But I'll plan to do the whole kit some day, the kit actually adds stability to the car so its not just for decoration. (from what I read at other Honda City forum. huhu)

QUOTE(j45on @ Dec 30 2012, 01:41 AM)
Kajang Sato Accessories selling LockTech for RM320. Friendly price though. I am also planning to change the front grill only. How much does it cost?

Anyway, have you guys read about people recording your alarm signal while waiting in shopping car park, only to repeat the signal to open your car to steal?

Link: http://forum.lowyat.net/topic/2646860
*
Price not bad for the LockTech, let us know how's the installation went.. not sure how much for the grill, probably 200 - 300?

Yea I saw that news on paper yesterday, but I think it only works for car that have 1 button to unlock/lock the car. City got 2 buttons to unlock/lock so when they record the frequencies to lock, they can't unlock.. unless they record your unlock frequencies and wait for you to come back some other day.

Just my thought, not sure if this is really the case.. huhu.

QUOTE(saitong09 @ Dec 30 2012, 10:56 AM)
What is the reason you want to downgrade?
*
For better fuel economy, and cheaper tire as well. Can use 195/55/R15 tire too right? A bit more comfort I guess with the thicker tire? Huhu. Maybe doesn't look so nice.
winterwish
post Dec 31 2012, 10:31 AM

Getting Started
**
Junior Member
141 posts

Joined: Jan 2003


QUOTE(v26davk @ Dec 31 2012, 08:01 AM)
Collected my City Polished Metal E Spec on Saturday....Got The Modulo Body kit with Duck tail spoiler(my prefered choice) and Mugen Door Visor installed for RM1180.00...this inclusive of paint and Installation...job well done....
After 1st service..will change to K&N or Redline filter... smile.gif....The ride is awesome... rclxm9.gif
*
Congrats bro, we got the same colour but I didn't opt for the body kit. Just the wing type spoiler biggrin.gif

I heard that the door visor is the main cause for wind noise when driving at speed above 120km/h. I got one installed as well but thinking of removing it because of it.. is it true?

Planing to replace my filter with K&N as well, just waiting for the stock filter to get dirty enough for replacement. tongue.gif

winterwish
post Dec 31 2012, 12:24 PM

Getting Started
**
Junior Member
141 posts

Joined: Jan 2003


QUOTE(v26davk @ Dec 31 2012, 12:05 PM)
Hahahaha....Wind noise not yet lo....Just drove off the showroom on Saturday...belum sempat Tekan lagi smile.gif....
But the visor looks cool....:S
The Kit was not at the dealership..i did it outside la.....PP material...At Honda its too expensive..somemore without spoiler..
*
Haha once you start to drive above 120km/h then then wind noise does get a bit annoying. The visor does looks really cool, which is why I'm a bit hesitant to take it off.. Maybe should drive a bit slower so no wind noise. Haha.

Would you mind taking photo of the body kit on your ride? Workmanship is good? Where did you install yours?
winterwish
post Dec 31 2012, 12:54 PM

Getting Started
**
Junior Member
141 posts

Joined: Jan 2003


What's your previous ride?
winterwish
post Dec 31 2012, 03:45 PM

Getting Started
**
Junior Member
141 posts

Joined: Jan 2003


QUOTE(v26davk @ Dec 31 2012, 01:11 PM)
Proton Waja 1.6M 2006...It served me well for a proton(Suprisingly)..6.5 yrs..Never failed to bring me home safely...No extra cost apart from regullr maintenance..


Added on December 31, 2012, 2:07 pmMy Bodykit was installed here:-

http://www.mudah.my/City+2012+Modulo+Body+...ee-19306092.htm
*
You're Waja is the one with Mitsu engine or Campro? The car served you well already biggrin.gif

Oh nice.. RM999 wihtout the spoiler? The bodykit does't need to remove our existing bumper eh? Just stick on using 3M tape?

winterwish
post Dec 31 2012, 05:35 PM

Getting Started
**
Junior Member
141 posts

Joined: Jan 2003


QUOTE(v26davk @ Dec 31 2012, 05:05 PM)
My Waja was Campro engine.

RM999.00 is full set with spoiler smile.gif

Its just that i chose the Ducktail type.

If not you will get the normal design that you see on Most new City...

So you pay RM999.00.....your car will look exactly like tyhe Modulo spec smile.gif

Nothing Removed.....3M tape + Screw just like what you see at the show room.  smile.gif

If you want the bodykit give this guys a try. I'm not kidding..they really do things with persision.
*
That's a good price oh.. really tempted now. Haha.

I already have the spoiler so price should be a bit less that RM999.. hmm.gif

What's this one?

"Modulo Aluminium Plate X 2pcs"

Got any photo?
winterwish
post Jan 2 2013, 01:18 AM

Getting Started
**
Junior Member
141 posts

Joined: Jan 2003


QUOTE(hollyfish @ Jan 1 2013, 02:08 AM)
user posted image
*
Ah okay got it, thanks mate. I thought the number plate. Haha tongue.gif

QUOTE(v26davk @ Jan 1 2013, 02:48 PM)
Here you go...sorry guys using Phone camera....

http://s1219.photobucket.com/albums/dd427/V26DAVK/MY%20CITY/
*
Awesome!! thanks for sharing, now i really tempted to go and install the kit on mine as well, hope got bonus this year rclxm9.gif
winterwish
post Jan 3 2013, 01:06 PM

Getting Started
**
Junior Member
141 posts

Joined: Jan 2003


Hahaha photoshoot session with your beloved City. Maybe I can join in as well biggrin.gif
winterwish
post Jan 7 2013, 11:07 AM

Getting Started
**
Junior Member
141 posts

Joined: Jan 2003


QUOTE(mytaffeta @ Jan 6 2013, 10:18 AM)
hi guys,

wonder if anyone fitted 195/55/16 Yoko C-Drive 2 to our stock rim? Will it hit fender when ferrying 2 adults? And how does it look?
*
I'm actually planning to use this size for my next tire as well, hard to find eh?


QUOTE(killerfly @ Jan 6 2013, 11:04 PM)
anybody using yoko Adrive R1 195/50R16? how's the FC, wear & noise? compared to the stock conti CPC2?
*
I'm using ADrive, FC not much different than stock (got about 460km per tank or so), wear I'm not sure since its been only a few month since I change my tire. I don't remember how the old one sound but City road noise insulation is terrible so I think pretty much the same. Haha.

Does anyone feel that our car is a bit heavy to accelerate? I always feels like I'm carrying a huge load in the back or something.. it helps if I could lose a few KGs myself but I feels like the car could do better.
winterwish
post Jan 7 2013, 02:29 PM

Getting Started
**
Junior Member
141 posts

Joined: Jan 2003


QUOTE(killerfly @ Jan 7 2013, 01:39 PM)
thxs good to know!

as for the acceleration.. yes bit of a struggle compared to my mom's 2006 vios... mayb better if change for lighter rims? take out spare tyre?
*
Hmm probably the rim, the stock rim is pretty heavy. After market 16" light rim is expensive, maybe down grade to 15"?


QUOTE(Dkck @ Jan 7 2013, 02:11 PM)
My 3 years old city reaching 60k mileage soon. Planning to service it outside because honda SC was quite pricey. Since 60k services will be a major services, so your guy pls recommend me should i service by SC or outside? If outside any shop recommend around SEL/KL area? Thanks
*
Your warranty over already? How much is the 60k services cost?
winterwish
post Jan 8 2013, 11:02 AM

Getting Started
**
Junior Member
141 posts

Joined: Jan 2003


QUOTE(j45on @ Jan 7 2013, 03:46 PM)
I agree with the heavy feel to the car's acceleration. Is it due to its heavier weight compare to other sedan in it's range? Need some data for comparison.

Otherwise, I wonder if it's because the car kicked in a gear lower than it should when we needed the boost? However the fact remains that the engine is considered small for the size it's enclosed in.

Other than it, the car feels quite solid doing 130km/hr but what can you expect from a 1,500?
*
You're probably right, the car is quite heavy for the 1.5l engine.. highway cruising is good though biggrin.gif


QUOTE(mytaffeta @ Jan 8 2013, 01:42 AM)
its very hard, if you found some share with me.. my stock cpc2 botak edy, mileage 53k.. so far, c-drive 2, neuton nt8000, bridgestone re050.. what else?
been scouting for tire that have 195/55 cuz i sat in my friend's neo wearing 195/50 csc1, quite bumpy.. 

throw in k&n bro, u will feel the different..  brows.gif
*
Oh no wonder it does feels a bit bumpier compared to the stock tire.. maybe I should go back to 185/55 for my next tire change.. its hard to find 195/55 yea?

I will, just waiting for the stock filter to get dirty enough for replacement brows.gif

winterwish
post Jan 8 2013, 01:14 PM

Getting Started
**
Junior Member
141 posts

Joined: Jan 2003


QUOTE(jackytiong @ Jan 8 2013, 12:51 PM)
XM2 185/55/R16 Rocks
*
You using this? How much does it cost? I heard the XM2 is quieter so I might just swap my current tire with this.. or downgrade to 15" with and use 195/60/R15.. haha.
winterwish
post Jan 8 2013, 03:07 PM

Getting Started
**
Junior Member
141 posts

Joined: Jan 2003


QUOTE(xin @ Jan 8 2013, 03:03 PM)
it shouldnt be more bumpy cuz youre using the same profile 55, mayb you can try reduce the tyre presure..that might reduce the bumpiness...
*
I'm using 195/50/R16 right now.. huhu.. hard to find 195/55/R16..
winterwish
post Jan 8 2013, 04:10 PM

Getting Started
**
Junior Member
141 posts

Joined: Jan 2003


QUOTE(xin @ Jan 8 2013, 03:09 PM)
haha sorry bout that, ya lower profile sure more bumpy .. but better grip ma ... try lower the pressure see if it helps ..
*
Haha yeah, maybe I'll try to reduce the tire pressure for now, thanks for the suggestion. But I'm seriously considering 185/55/R16 back for my next tire change..
winterwish
post Jan 9 2013, 12:46 PM

Getting Started
**
Junior Member
141 posts

Joined: Jan 2003


QUOTE(j45on @ Jan 8 2013, 05:34 PM)
Wonder if anyone can shed some light over tire size such as 195 vs 185 and 55 vs 50?
*
195/185 is the width of the tire, wider is generally better for stability and handling but will also increase the fuel consumption a bit.

55/50 is the thickness of the tire profile (the sidewall). thicker profile will make the care more comfortable but will also cause more body roll compared to a thin profile. Thin profile looks good (especially on 17" rim) but the car will be quite harsh and hard..

The default City (E) is 185/55/R16..

Hope this shed some light to your question, it may not be the brightest light though. Haha.


QUOTE(j45on @ Jan 8 2013, 07:01 PM)
I want to ask about the USB port. I tried using a few pen drive and I can't seem to play my mp3 files. You guys having this problem?
*
Your MP3 bitrate is below 320k? Mine work flawlessly with Kingston 32GB thumbdrive.

QUOTE(joelriez @ Jan 8 2013, 08:16 PM)
My car have been in workshop for almost 3weeks now. Scared later having trouble to start the car. cry.gif
*
What happen to your car? The side mirror issue?

QUOTE(jackytiong @ Jan 8 2013, 10:03 PM)
it cost ,290-300 KL, If in Klang only RM265, less noise and soft abit.
*
Price quite good, thanks for sharing.

winterwish
post Jan 11 2013, 10:10 AM

Getting Started
**
Junior Member
141 posts

Joined: Jan 2003


QUOTE(j45on @ Jan 10 2013, 06:19 PM)
Ah cool, so for 17" rim, the best tire profile to go while maintaining maximum wheel diameter will be 205/45/R17. What will be the 17" profile to fit the 205/45/R17 tire?

I managed to solved the pen drive issue. It is caused by custom allocation size being more than 8k byte per unit. Higher than that and the player will not be able to read anything, too low and your songs might take too long to be indexed.
*
Ah, good to know. But I'm curious why didn't it defaulted to 8k byte per unit when you formated the pendrive?


QUOTE(xin @ Jan 10 2013, 06:27 PM)
Best is to get a 6.5jj or 7.0jj to accormodate the 205 nicely.
*
Any thought on 15" rim? Does it look weird with a 205 tire? I might downgrade to a 15" rim on my next tire change, just not too sure about the tire size.

QUOTE(Ssaymlenait @ Jan 10 2013, 11:43 PM)
Anyone experience some small clanking sound when the gear change from 4th to 5th gear? Happens a few times a day....sent to service center but they say can't hear the noise and can't identify the root cause....
*
Is it very obvious? I can't hear anything when the car shift gear.. maybe you can try recording the sound and show it to them?

Anyone else using this type of door visor? I'm thinking of removing it since it is causing a lot of wind noise..

user posted image

p/s - not my car
winterwish
post Jan 11 2013, 02:51 PM

Getting Started
**
Junior Member
141 posts

Joined: Jan 2003


QUOTE(xin @ Jan 11 2013, 01:12 PM)
It depends on the Rim width. Take stock S spec 15"rim for example, its a 5.5jj rim which means the max it can use is a 195 tyre, if use 205 then it will bulge out abit. Sure 15"rim can take 205 as long the Rim width is 6 to 7inch jj then no problem, my old Satria Gti also runs on a 205 with 15"rim.
*
I'll be using a different rims so I'll try to find one with 6 or 7 inch jj. From the calculator, the closest size I could go for is 205/55/R15 or 195/60/R15. Will that hit the fender you reckon?

12 Pages  1 2 3 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0525sec    0.77    7 queries    GZIP Disabled
Time is now: 8th December 2025 - 12:55 AM