Mine is WRT54GL V1.1, running on Firmware: DD-WRT v23 SP2 (09/15/06) mini.

Hi, this thread has too many pages so i didn't go through it page to page

how to flash the wrt54gl with DD-WRT? and what's the version??

[quote=ZONX,Oct 23 2006, 02:35 PM]
Before flashing, 1st restore to factory default

Flash with this
http://www.dd-wrt.com/dd-wrtv2/down.php?pa...ini_generic.bin

after that remember to do the 30 sec reset (hold the reset button & power on, hold the reset button for 30sec)

the new user id:-
Id: root
password: admin

You are good to go..flash the firmware to any of the "wrt54g" flavor u like such as std, min, vpn..etc
http://www.dd-wrt.com/dd-wrtv2/downloads.php

Std:
http://www.dd-wrt.com/dd-wrtv2/down.php?pa....v23_wrt54g.bin

mini:
http://www.dd-wrt.com/dd-wrtv2/down.php?pa...mini_wrt54g.bin

good luck!

Yeah using its original firmware Firmware Version: v1.00.6

Too hot will cause it to DC by itself ar?
router is connected to the modem directly of course.

I'm scared to flash it cuz you all said that if done wrongly it will go kaboom and warranty will be void

Just follow the steps and don't do something that you're not sure, ask around before you go into it. Flashing it is simple as 123 provided you are clear about what you are doing.

Edit: Typo

This post has been edited by blaxez: Oct 23 2006, 10:15 PM

std? mini? vpn?

what's the different?
if i opt for bt, whcih should i choose?

This post has been edited by ZONX: Oct 23 2006, 07:23 PM

ZONX, use the wrt54g_std (complete with all the features) will do the job. mini is u want to save some rams for more custom plug-ins.

Might off topic but still something related to linksys.. i have old linksys modem AG241, how come the power adaptor so hot one? Its a huge big adaptor but damn hot. How bout u guys?

mine was hot too, it got burned 2 times and I'm too lazy to take it for RMA for the 3rd time, I'm using my spare laptop adapter with it and it's much cooler.

thx will try it after my linksys is able to connect to the Internet. still under configuration

I dunno why my network speed so slow, wired and even wireless...



Can anyone help ?

This post has been edited by rattan: Oct 25 2006, 09:33 PM

hi, i have set the static ip for my wireless & wired connection, i checked my BT's listening port with http://www.canyouseeme.org/ , the site always can see the port with wireless connection but not wired one, anything i set wrongly? FYI on BT running, with wireless i could see many remote clients but wired only shown local clients with much much slower spd. Appreciate your help, thks~

IMO, you only port forwarded to the wireless connection and did not port forward to your wired connection.

thks for reply, i already portforward both




Attached thumbnail(s)

Anyone can help ?

Alright, I tested out that site you gave and I don't think it is really accurate for me. I did try that and the ports that are opened for mine seems to be not detected by them wheres uTorrent detected it was opened.

maybe u r rite but one thing i can assure is with wired connection, the spd dropped drastically and couldn't see any 'remote' clients as what wireless do

No one can help ?

You cannot foward the same ports for both PCs. Please use different ports for different computers on your network.

Hmm, try reverting back to the old linksys firmware and see if the problem goes away.
Possibly a hardware issue.

This post has been edited by ferox: Oct 26 2006, 12:49 PM

i am using notebook, one is for wired connection while the other ip is for wireless, and only one will be enabled each time, do i need to set different ports?