hehehe here is some custom cable i made for the speakers


_DSC0041 by Dennis Yeoh, on Flickr

how it looks like on the speaker


_DSC0042 by Dennis Yeoh, on Flickr

Can't tell what it is. Looks like canare l4e6s? If you want to customize the 4 pin xlr you can also. Just use multimeter to find the pins

that is a xlr connection? i cant figure out what kind of plugs they use i though xlr have 3 pins only? correct me if i am wrong. i google searched the 4 pin xlr dont look like the one that is used with the speaker

This post has been edited by dennisyeoh: Jan 5 2013, 11:25 PM

Actually that is 4 pin din. And the d1010 uses mini din like mouse connector.

BTW fan not needed on heatsink. Transistors perform differently at different temperature. Let it warm up naturally.

This post has been edited by CyntrixTech: Jan 5 2013, 11:33 PM

thanks a lot i will look around and see. oh about the fan really? because sometime when i play it at a louder volume the heatsink get quite hot especially there is no wind flow behind the speaker so i am kinda worried, ok ok i removed it

I got the Sabre DAC and it made the speakers a bit brighter already. Scared it'll be too bright hmm. Any recommended cable?

erm canare l4e6s? erm imho cable don really change that much of the sound signicture

I see. So what does it improve on?

Wow, Canare l4e6s? It sucks... It made it sound overly bright.

If you google, l4e6s is actually for microphone purpose. I used to had l4e6s and ditch them for Belden.

than maybe you can go to moom audio to order better cable

Bro, where did you get the Belden? Is it Belden 1311A?

Its some ordinary Belden. I used 1311A for my car before I sold it, but as I remember (if I remembered it correctly), this is the speaker cable, not those used for signal cable.

Hey guys, I just got myself a M100mkii at heavyarms. I would like to know which speakers is left and which one is right? It doesn't indicate on the back of the speakers nor the instruction manual. Please help. Thanks.

The side with the amplifier is the right

Thanks for the reply. Just set up the speakers. Its sweet as~!

PS: It is also loud as...

This post has been edited by micdy: Jan 7 2013, 08:53 PM

Are you bluetooth-ing it from your iPhone? The speakers prioritize bluetooth as #1 source and line in as #2. You can do the following:

#1 - Hook up sound card to Speaker (set volume to low)
#2 - Connect any BT device to the speaker via BT

You can play music from your phone, it goes through a very high quality BT receiver that you would not likely to be able to tell a difference from line in. When you want to listen to whatever from your PC, disable BT from your phone and viola! You now have the speakers automatically connected to the PC

The Bluetooth connection is reserved for when I am cooking or at the loo.. I am still testing it.. The sound is so much better that any speakers I tried especially the BOSE speakers... All in all, I am pretty stoned now. All I need is some beer or alcohol and get drunk together with some musics...

I got a question, do I need to direct my fan towards the fin at the back of the speakers? Mine seems to run a bit warm. Will it damage the speakers if I did not direct my fan towards it?

This post has been edited by micdy: Jan 7 2013, 09:16 PM

Another owner Dennis is worried of his D1080-IV as well. Don't worry about it, you don't need a fan or anything on it. In fact when the transistor warms up the speaker should sound better. This also applies to tube amps

BOSE = Buy Other Sound Equipment
BOSE = Buy Our Shitty Equipment

As quoted from "http://www.urbandictionary.com/define.php?term=Bose"

This post has been edited by CyntrixTech: Jan 7 2013, 09:25 PM

Thanks for the info... I am back to being drowned by the awesome sound quality..

is it m50w is normal come with type a plug? coz mine is like that~