why not sabar one? i'm not a bot

Sry... .... just worry is that i miss something out there...

errr.. my latest result:

CPU : AMD OPTERON 144 : CAB2E 0602GPAW
BIOS Set Vcore : 1.45V
BIOS Set Vdimm: 2.8 V
Mobo: DFI NF4 DAGF/INFINITY
Cooling : Watercooled (Swiftech MCW6002 + Nirox P2800 + Bulkhy Rad)
RAM : 2 x 512M KVR3200 DT-D43 : 2.5-4-3-8 (1CL) Dual Channel
The rest in my sig.



Now playing around till can get a new PSU..

uish amok..... 366 HTT?!

yeahh..now everyone open their eye..

not only ultra D can do good job for overclocking..

infinity board also can

Amok large prime fft for ram ok tak??

yup so far no prob running small fft (cpu) and large fft(rams) for more that 12 hrs... no screenies though lazy nak mampus... my rams maxed out at 247MHz, it's oni a pair of KVR DT-D43 but.... running with dividers!!! (which is rare).

want to ask some question...

when i do some prime using sp2004, nothing shows at the CPU speed..!! for example show 1800MHz FSB : 200 [200 x 9]

could anyone tell me whats the problem??

i'm using
AMD 3000+ venice E3
Winfast NF4K8AC
RAM DT-D43 256*2

thanx

This post has been edited by camedemac: May 3 2006, 12:04 AM

Did i miss out anything?

oops.... didn't see that one earlier

Thanks soulie....

currently doing 2.55Ghz wif my venice at 1.44vcore...


Attached thumbnail(s)

passed prime for 12 hours for my 2.55ghz amd3000++ venice at 1.44 vcore
sry double posting cause connection problem, do delete this section

This post has been edited by lichyetan: May 4 2006, 01:20 AM

passed prime for 12 hours for my 2.55ghz amd3000++ venice at 1.44 vcore
here is my settings:
AMD Athlon64 3000++ E6 @ 283*9 1.44 VCORE
ASUS A8N-SLI
2x 512MB TeamXtreem DDR600 @ 283MHz [2.5-4-4-8], 2.8v
Hypertransport x3
CoolerMaster 450W ACLX Real Power

This post has been edited by lichyetan: May 4 2006, 01:21 AM


Attached thumbnail(s)

any stepping bro? it's kinda boring without any stepping

will post it in next few days after reconfiguration my wc kit... stay tune, the prox actually not bad, could do 2.5Ghz without adding the vcore

mazdagtr210 will come back with superb ocing after this . Retired a while coz bankrupt... hehhe

with that setup u can go higher... try push more....

Soulfly, For Your Convenience

CACJE 0607 APAW | charge-n-go | 2700MHz | AUTO | Opteron 144 E4 | AIR / fanless?



Main Specification
~~~~~~~~~~~~
AMD Opteron 144 (CACJE 0607 APAW)
512MB x 2 Corsair XMS3200 XLPT rev 1.2
DFI LanParty UT nF4 Ultra-D
Enermax Liberty 400W PSU


Cooling Method
~~~~~~~~~~
Scythe Ninja (Fanless)
Evercool VC-RF Chipset fan @ 3000rpm (max 5000)
2x 120mm 1,200rpm casing fan.
1x PWM 80mm 1500rpm (placed under CD drive and blow towards Ninja as well)


BIOS Set Values:
~~~~~~~~~~~
AMD Opteron 144 @ 9 x 300 = 2700MHz
Vcore = AUTO
Vdimm = 2.70V
VLdt = AUTO
Vchip = AUTO
LDT multiplier = 3x
RAM divider = /12


Screenshot:
~~~~~~~~

This post has been edited by charge-n-go: May 10 2006, 03:19 PM


Attached thumbnail(s)

New overclocking !

CACJE 0607 APAW | charge-n-go | 2808MHz | 1.456V | Opteron 144 E4 | AIR(fanless)



BIOS Set Values:
~~~~~~~~~~~
AMD Opteron 144 @ 9 x 312 = 2808MHz
Vcore = AUTO*104% = 1.456V
Vdimm = 2.73V
VLdt = AUTO
Vchip = AUTO
LDT multiplier = 3x
RAM divider = /12


Screenshot:
~~~~~~~~

This post has been edited by charge-n-go: May 11 2006, 02:29 PM


Attached thumbnail(s)