Hi any chance you can post some screen shots of your vlan setup in the tomato interface itself rather than the ones that are up? I have just installed one of the tomato variants onto my wrt54GL which has vlans so I can use with maxis but its very confusing if you havent done it before.

much thanks

Talk anytime anywhere in the world with free minutes

just sharing here. I was setting sipdroid successfully and it worked. thanks to viknela for valued infomation
now my setup is Alcatel Lucent modem + tl wr1043nd with openwrt + smart phone with voip/sip app installed

for those interested u can download from market search for sipdroid or other voip/sip app.

here is the setting for sipdroid,

authorization username: 03xxxxxxxx
password: 03xxxxxxx1 or phonebill account number+ phone number last 4 digits
server or proxy: bvgw01.maxis.com.my
domain: homesip.maxis.com.my
you can tick any network you like wifi,3g and edge

updated: not all working in unifi network and talktime limit to 10minutes per call maybe this is maxis limitation for non standard voip setting

This guide is for the huawei VDSL modem but how to setup a custom router if my setup is using TM white Alcatel-Lucent BTU? Hope some sifu can shed some lights.

@pisanq
Thanks for the reply. Let say I want to put

A-L BTU -> Custom router (Internet & Wifi) and use back thomson for voip, what do I need to do since I can't access the A-L BTU to change the VLAN and port binding in step 4 from 1st page?

And can I reuse back my TPlink router which was previously configured to Unifi?

first i don't have enough time to try this setup yet but i believe it will work

for internet:
u don't need to change anything inside A-L BTU, just connect the BTU to your new router. tag your new router ppoe port as vlan 621 so that u can dial up to maxis ftth. connect your new router wan port to AL-BTU.

for voip:
set a lan port as untagged and connect your thomson wan port to this lan port. let the phone connect to your thomson like default maxis ftth setup

i will requote this post later after i finish doing it for my home. hope it helps

Thanks. Gonna try this. The Maxis FTTH not yet 1 day installed in my house already kena rape. 

Those who still using Thompson router but want to change the DNS, can backup a copy of the setting [user.ini] open with notepad and find


change to


save it and restore back to the router..
in this way the comp will auto get 8.8.8.8 and 8.8.4.4 as DNS through DHCP..

Tested and it's not working on Thomson V3

But when I save back the user.ini in the router, the dns was gone and back to normal user.ini.

Aaaaa now I know why it was not working. I left out the "localdns=disabled" part at the back. Now ok already

Thanks ywkwy