So something wrong with my bulb assembly... that what I thought - just pull out from the socket. But feel like the bulb pins are soldered/glue to the socket. I even try to "congkel" the bulb off the socket using the screwdriver.

Yes I was trying to replace with the Philip Extreme Vision Plus. Bit I still cannot replace it since I cannot dismantle the bulb from the connector. How is the performance of your Philip bulb?

This post has been edited by klate: Jul 16 2012, 04:32 PM

let me see, do you see clip at the side of the rubber or on top?

Philip VisionPlus is bright but not as in WHITE bright, still yellowish but brighter! Got my small bulb installed with Piaa LED. My next buy would be the fog light bulb.

The spring clip is holding the bulb to the headlight body.

When I loosen the clip the bulb come out together with connecter and he rubber housing.

well, hmm...then it should be a direct plug out from the connector. Can you take out the rubber housing and separate with the connector?

Primo user here..can join or not?

Isn't the rubber housing is between the connector and bulb?. SInce I can't unplug the connector from bulb the rubber is there between the two ... never mind I'll ask the SC how to change the bulb

---

Added on July 16, 2012, 10:15 pmWelcome ..... Primo tu apa.

This post has been edited by klate: Jul 16 2012, 10:15 PM

primo tu leh naik 6 orang ja....hehehehe...

---

Added on July 17, 2012, 1:58 am

This post has been edited by Sh@rty 5: Jul 17 2012, 01:58 AM

Exora Bold Prime lah tu! Kira macam Exora Special Edition, sepatutnya ada sunroof, pintu belakang auto slide(mcm estima), rim 17" & ada scoop kat bonet depan baru buat orang terliur.

This post has been edited by jemmi: Jul 17 2012, 08:07 AM

Mine also 6 seater

seek for some assistant please, had my EB on March..were having AC with only air blowing @ R and experience uncertain in temp while driving. ( cool air and all of the sudden only air breeze and back to cool air even having the temp knob at 50%) took to SC, replace the Thermo Amp. in which they claim to be the problem. was ok for few days but im experiencing 10 ~ 15 sec. delay in time of only air blowing then gradually come cool air.
has anyone experience these delay kicking sound whenever you on the AC, some sort of delay start of the compressor.
is this normal or is the temp. sensor probe is malfunction

auto slide doooooorrr

wah! im not worthy..

Tunggu nanti saya take over proton, siap deal dgn Toyota mintak sekali enjin 2.0 Dual VVTi (dari Toyota Altezza98) untuk Exora Special Editon.
Berangan je lah!

This post has been edited by jemmi: Jul 17 2012, 09:48 AM

kenapa toyota?bukan syok sgt pun..

better FSI engine from VW

Kalau Toyota belambak ada half cut atau recond part, tentu ramai gi upgrade enjin part. Lagipun low kos nak jaga/maintainance, semua pomen boleh repair. Mahu nanti ada yang masuk Turbo, GT86 atau enjin Lexus. Aku pun buka Gudang Half-Cut/Recond Toyota, sekali dengan pomen untuk upgrade/modified. 2 in 1 business.

Orang Malaysia dengar je europe car, kecut/takut kat kos nak maintain nya. Pomen kat tepi jalan tak berani nak usik/repair, pening nak cari part dah lah mahal. Boleh buat tak tentu jadi o.k atau k.o.

This post has been edited by jemmi: Jul 17 2012, 11:04 AM

Good Day EB owners,

Just want to ask around whether the EB that you guys owned have Air-Cond problem? Such as the aircond is kinda blowing hot air when the car is not moving?

---

Added on July 17, 2012, 11:27 amHi Bro,

i had my EB on January, and i am experiencing that too. I even send it back to Proton service centre in Shah Alam (claim to be one of the largest SC). They replaced some chips and it work fine for the 2-3 days and the problem came back.

This post has been edited by pkahho: Jul 17 2012, 11:28 AM

proton cars got aircond problem?
erm all the while i thought proton has a very good aircond system

so far has anyone change the temp sensor probe..

This post has been edited by nacier5: Jul 17 2012, 12:56 PM

Aircond no issue - April 2012 model