A little update on these XMS3502v1.3s. Looks pretty good so far......

This post has been edited by kcnyc: Feb 18 2006, 04:00 AM


Attached thumbnail(s)

the timing satisfied for me, using such a low voltage.

i just managed to Overclock the ram to 228Mhz 2-3-4-5 timings@2.7v...

This post has been edited by lichyetan: Feb 22 2006, 10:33 PM

Seriously this DDR is very good at low timings. My last run was at 250FSB 2.5 3 2 5. And Prime stable.........

my max push....

can i know what type of chip inside...
this is my ram
timing:3.3.3.8
voltage:id un know but i set to 2.5v(is this ok)
twinx1024-3200v1.2


i already search da link that i get from this thread.still can find it.already have check with corsair website still cant find it.pls help me

Got rev1.2 for the 3200pro LED ? Tak sabar nak tengok result . Tested 2 pair of the same ram, both also 3-3-3-8 but rev1.3, able to do 200 @ 2-2-2-5. One of the pair fully stable at 275 @ 2.5-3-4-7, 2.8v. whereas ahpaul82's one rev1.4 can do 290 @ 2.5-4-3-7 memtest86 stable.

This post has been edited by gsan: Mar 9 2006, 09:49 AM

expensive thing in my rig is this ram
this is my result with chpalang psu:
ram @2.5v

will oc more when get new psu

Damn wasted wei..........DDR400 working at DDR333 speed. Man your rams are not happy at all man. These DDRs are at least capable of DDR500 speeds.........

ya lor... .maybe i will oc my proc too.makei t 1:1.for this moment i dun have enought setup to oc my rig.can u tell me what type of chipset my ram use.i search all of that instead google doesnt have any info.

Might be TCC5.

recently brought a cooler master musketeer, sticked the temp sensor to my corsair twin x pro series ram after OC... 2.75v@250Mhz@2.5-3-4-7 the temp bot 45c during memtest...

That is not very warm.....since wheather in Malaysia is around 30C+. A 15C jump quite ok ler.....

another try for my ram at 250Mhz 2.5-3-4-6 passed memtest & prime test.... but failed if set to 1T...

This post has been edited by lichyetan: Mar 11 2006, 09:58 AM

@lichyetan
my mobo dun have any setting to set 1t or 2t.if that so what my mobo running to 1t @ 2t.so great u always testing ur ram,but me cant cause my chapalang psu...

are you sure? my utt (255@3.5v) with copper ram sinks but without any cooling fan, during memtest, up to 47'c.

This post has been edited by gsan: Mar 11 2006, 11:36 AM

could be 40c or 45c, cause cannot accurately measured since musketeer temp display meter not so accurate cause the meter just show 30-40-50.... so it's pointing between 40- to 50, should be 40-45 i guess, take it as 45 for safe...

sory , noob asking question here

are BH6's any good ?

friend hav a pair , tot of borrowing them to try them out

They are like BH5s, but just not as good. Go give it a spin, you'll never know.
Its like AE86 vs AE65 - Initial D comparison. LOL

any estimate on teh max voltage it takes ?

worried that i will fry them

and if i'm able to convince him out of it , i may be able to give some results tomorrow