how much you got this ram?
Corsair XMS TwinX PC3200 Pro Series Ram, Owner Please Come In
|
|
 Dec 31 2005, 10:08 PM
Return to original view | Post
#1
|
 
Senior Member
2,471 posts Joined: Jan 2003  
|
|
Quote|
|
|
|
|
Jan 1 2006, 02:27 AM
Return to original view | Post
#2
|
|
Senior Member
2,471 posts Joined: Jan 2003
|
just help my friend testing his 2x512MB XMS3200v1.3 Pro Series 3-3-3-8, able to boot with 2-2-2-6 at 200Mhz.
   This post has been edited by gsan: Jan 1 2006, 03:23 AM |
|
|
Jan 3 2006, 08:21 PM
Return to original view | Post
#3
|
|
Senior Member
2,471 posts Joined: Jan 2003
|
Guriseruda,
can do 200 @ 2226 a default voltage? |
|
|
Jan 3 2006, 11:13 PM
Return to original view | Post
#4
|
|
Senior Member
2,471 posts Joined: Jan 2003
|
QUOTE(Guriseruda @ Jan 3 2006, 11:08 PM) just try at default voltage set at 250mhz @ 2.5.3.3.7 still can play doom3, super_pi_mod pass at 32m.. donno is good news or bad news not bad what...   |
|
|
Jan 5 2006, 09:51 PM
Return to original view | Post
#5
|
|
Senior Member
2,471 posts Joined: Jan 2003
|
QUOTE(cyberian @ Jan 5 2006, 02:31 PM) erm... depend on luck arr.. but then is that a good buy? remember bring along a knife and then force him to take out his sli-dr expert can arr.. staying cyberia PM your YM!   |
|
|
Jan 9 2006, 09:24 PM
Return to original view | Post
#6
|
|
Senior Member
2,471 posts Joined: Jan 2003
|
QUOTE(remysix @ Jan 9 2006, 08:33 PM) done with the memtest at DDR620@2.5448...dis wan wif 3.0v... it's not xms3200pro rev1.3, right?  hope can push higher...sorry for the blur image, no DC la...only camera-phone  |
|
|
|
|
|
Jan 11 2006, 08:22 PM
Return to original view | Post
#7
|
|
Senior Member
2,471 posts Joined: Jan 2003
|
QUOTE(lichyetan @ Jan 11 2006, 12:41 AM) u mean the rev1.3 is the worst among??? i didnt get wat u mean? but i heard that it's running samsung tccd chipset, should be good to overclock... tccd chip kah? have you take off the heat spreader?  |
|
|
Jan 13 2006, 11:06 PM
Return to original view | Post
#8
|
|
Senior Member
2,471 posts Joined: Jan 2003
|
will try to get the ram from my friend and test it again.
|
|
|
Jan 21 2006, 10:23 PM
Return to original view | Post
#9
|
|
Senior Member
2,471 posts Joined: Jan 2003
|
just help another friend tested his 3200pro series and able to do 2225 @ 200 too.
|
|
|
Jan 22 2006, 08:52 PM
Return to original view | Post
#10
|
|
Senior Member
2,471 posts Joined: Jan 2003
|
QUOTE(lichyetan @ Jan 22 2006, 05:14 PM) wat did u set for vdimm??? can provide more info??? cause i also wanna do it... default voltage failed but 2.9v is doing fine  |
|
|
Jan 26 2006, 09:33 PM
Return to original view | Post
#11
|
|
Senior Member
2,471 posts Joined: Jan 2003
|
well, we are waiting for the power of rev1.4
|
|
|
Jan 27 2006, 10:22 AM
Return to original view | Post
#12
|
|
Senior Member
2,471 posts Joined: Jan 2003
|
QUOTE(ahpaul82 @ Jan 27 2006, 09:56 AM) 1stick : able to do 250MHz, 2.5-4-3-7 nice man 2stick : fail to do 250MHz, 2.5-4-3-7 (memtest passed all, will torture it alone later) 2stick : able to do 250MHz, 2.5-4-3-7 4stick : haven't test. All vdimm is 2.8v set in BIOS. Here is the screenshot which both sticks able to do 250MHz together, 2.5-4-3-7,1T, 2.8vdimm. [attachmentid=89044] Will try to put it further, my aim is 275MHz  btw, how much you got these 2 pairs? |
|
|
Jan 28 2006, 10:30 AM
Return to original view | Post
#13
|
|
Senior Member
2,471 posts Joined: Jan 2003
|
QUOTE(ahpaul82 @ Jan 28 2006, 10:27 AM) i don't know the price, nice result man fren send down to me have a test another 3hours i can post up my result for 4th stick. 270MHz, 2.5-4-3-7, 1T, 2.8vdimm.  my friend's rev1.3 can do 240 @ 2.5-3-3-8 stable but no dare to get higher due to intel stock hsf & x13 multiplier. will try futher once he get the new hsf after chinese new year. |
|
|
|
|
|
Jan 28 2006, 02:56 PM
Return to original view | Post
#14
|
|
Senior Member
2,471 posts Joined: Jan 2003
|
QUOTE(ahpaul82 @ Jan 28 2006, 01:13 PM) 4th stick result updated. well, the result sound good. but what about if running in dual channel? : 270MHz, 2.5-4-3-7, 1T, 2.8vdimm. [attachmentid=89188] now testing the 3rd stick. a quick run SuperPI 8MB for 3rd sticks at 290MHz, 2.5-4-3-7, 1T, 2.8vdimm. [attachmentid=89189] |
|
|
Jan 29 2006, 10:34 PM
Return to original view | Post
#15
|
|
Senior Member
2,471 posts Joined: Jan 2003
|
i'm sure that this 2 sticks are based on samsung tccd/tcc5 chip.
This post has been edited by gsan: Jan 29 2006, 10:35 PM |
|
|
Jan 30 2006, 06:17 PM
Return to original view | Post
#16
|
|
Senior Member
2,471 posts Joined: Jan 2003
|
QUOTE(ahpaul82 @ Jan 30 2006, 03:38 PM) 3rd and 4th sticks dual channel result : but the previous 2 sticks can do with 290fsb, are you sure that is the memory controller limited you?265MHz, 2.5-4-3-7, 1T, 2.8vdimm. [attachmentid=89273] 270MHz and 290MHz in Window cannot run Prime95 stable.   memtest no error at least 8hours, so i suspect is my processor's memory controller hold me back.  btw, i should satisfy with the result already |
|
|
Jan 31 2006, 07:08 PM
Return to original view | Post
#17
|
|
Senior Member
2,471 posts Joined: Jan 2003
|
QUOTE(ahpaul82 @ Jan 29 2006, 09:44 PM) Updating result : ahpaul82, what's your setting for Drive strength & Data strength. vdimm : 2.8v  now i got another pair rev1.3 to test. |
|
|
Feb 1 2006, 09:44 AM
Return to original view | Post
#18
|
|
Senior Member
2,471 posts Joined: Jan 2003
|
QUOTE(ahpaul82 @ Feb 1 2006, 03:44 AM) If im not mistaken is set to AUTO thanks ya Will double check for you tomorrow morning, now busy tweaking the VA-710's equalizer do update me your result too yaa.  still testing the stability & overclock performance, but with the currectly frequency/timing, i would say it's very worth to get this ram with that price. |
|
|
Feb 1 2006, 11:07 AM
Return to original view | Post
#19
|
|
Senior Member
2,471 posts Joined: Jan 2003
|
Latest updated
1GByte TwinX - 2x CMX512-3200PRO (XMS3200v1.3) 3-3-3-8   Result: 270 @ 2.5-3-4-7, 2.8v memtest stable for whole night, morning quick test 275 at the same timing but need higher voltage, 3.0v to error free in memtest. any voltage below 3v will give errors in memtest. as i know, newer tccd need higher voltage to perform better. since this ram is labelled 0524XXXX, i guess that the chip mostly based on Samsung TCCD 0522 or even newer.  will push to higher later as I need to surf net now |
|
|
Feb 3 2006, 07:44 AM
Return to original view | Post
#20
|
|
Senior Member
2,471 posts Joined: Jan 2003
|
New updated:
the pic got a bit blur after burning-in, the ram finally can do 280 @ 2.5-3-4-7, 2.8v  |
| Change to: |  0.0263sec
 0.25
 7 queries
 GZIP Disabled
Time is now: 2nd December 2025 - 04:56 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.