Why don't u use a table fan instead?
My cpu cool by a table fan, that save me a lot of money on fan

1 month only, ur casing full of dust already i bet..

Well, the casing doesn't full of dust, but the fan is

well u'll be suprised what i'm using to cool my system

table fan is still not that extreme yet

Anything above 3.0V is not even stable unless you get those that can take voltage supposedly NEW TCCD(which until today, I have not seen). So why would you even go to 3.2V? And 3.2V is dangerous, it is like asking the TCCD to do a BH5 trick! A 100M sprint runner to run the marathon! That I won't do.

And you keep saying it is dangerous....according to you is it? I have been using it at 2.9V everyday. No problems at all. And most other forumers are using it at 2.9V also in Malaysia. I don't hear them complaining also..........

Table fan u say, that's my setup too lol:

New updated:

the pic got a bit blur after burning-in, the ram finally can do 280 @ 2.5-3-4-7, 2.8v

those is the past testing...
for those xms pros series i dun recommend to gave more voltage applied on it, especially anything more than 2.8v...
or not, rma sure will be...
there is some in LYN also hv those problems...

well, hv tried on other pair of tccd, this time is not extreme, 2.8v...
but, still it gave me those funky reponse...
keeping bsod when archieving 275 only...
now that pair in rma process...

and again, 2.8v also gaving cl2.5 can't boot, for those using OCZ EL pc3200(tccd)....
bigtoe said is the spd chips facing problems.
but dunno...
since may in XS also facing it...

dunno what is the cause, but tested wif some mobo of nf4, from dfi ultra-d, to gigabyte, and sli-expert...

back to topic for the xms pro series, tested on few pairs, not every pair of rev1.3 i hv tested work greats...
infact, 2 pairs can't boot in my system if running dual channel.

so, i use a p4 s478 to test, and i gave me different result.
using CPU-Z to check on those chip's info...
the model i get is some stick show CMX512-3200, some is CMX512-3200pro, and 1 stick gave me this info: CMX512-C2PRO.

guesting tat it is some unqualify chip for high speed eg, C25 and PC4000 series.

yup, agree with you. that's why the timing is 3-3-3-8. so far, i've tested 2 pair of 3200pro rev1.3 and both also can do 200 @ 2-2-2-5 with prime stable. due to time purpose (3 days), i only can test 1 pair among these 2 pairs. 275 @ 2.5-3-4-7, 2.8v is pretty stable under memtest (standard test) & sp2004. whereas 280 with the same timing only memtest stable but failed under sp2004. as a conclusion, with this frequency & timing, the bandwidth is higher than my gskill utt bh5 which is running 255 @ 2-2-2-5.

This post has been edited by gsan: Feb 3 2006, 08:30 PM

gsan, what voltage u do to test for 2-2-2-5 @ 200?
my pair can do on 2.6v only

default voltage only for normal use like online, listen song and watch movie. 2.8v or higher voltage to run memtest & sp2004 stable.

gsan :
Nice result there !
but too bad cannot stable in window ..

My first pair of Corsair XMS3200 PRO doing 2-2-2-5, 1T, 2.7v in my Althon XP TB-B system (ABIT NF7-S board) ,
running Prime95 and SP2004GO together almost 22hours already.
didn't try 2.6v through..

will update the result over here .

edited :

result updated.

2-2-2-5, 1T, 2.7v Prime95 24hours.





the SP2004GO i accidently press exit instead of stop it
thats why second pics no SP2004GO reasult, sorry.

This post has been edited by ahpaul82: Feb 4 2006, 01:23 AM

updated :

after change the Row Refresh Cycle Time (TRFC) to 19,
finally able to do 270MHz
i didn't try 17,18

RAM: Corsair XMS3200PRO v1.4 at DDR540, CL2.5-4-3-7-1T @ 2.8V



although my result not as good as other TCCD, but im happy with it
will try push it more further

ahpaul82,

there is a funny thing with my ram. no matter how i tune the ram, it never can run 2.5-4-3-7 and only deal with 2.5-3-4-7.. actually the ram is running stable 285 with the same timing & voltage in memtest86 but still failed under sp2004 with shorter time (if i'm not remember wrong, should be fail within 3hours). so far, only 275@2.5-3-7 pass all tests included superpi32m. and the ram is now return back to the owner.

Compatibility issue testing...

found it weird:

see the different?
1st stick show c2pro, 2nd show normal corsair cmx

http://valid.x86-secret.com/show_oc?id=71760

CPU : AMD Opteron 146 (UP) (*1)
CPU PSN : AMD Opteron™ Processor 146
CPU EXT : MMX (+) 3DNow! (+) SSE SSE2 SSE3 x86-64
CPU Cache : L1 : 64/64 KB - L2 : 1024 KB
Core : Venus (0.09) / 0xF71 / E4
Freq : 2009.27 MHz (200.93 * 10)
----------------------------------
MB Brand : DFI Corp LTD
MB Model : LP UT NF4 Expert
NB : nVidia nForce4 rev A3
SB : nVidia nForce4 MCP rev A3
----------------------------------
RAM Size : 2048 MB
RAM Freq : 200.9 MHz
RAM Type : DDR-SDRAM Dual Channel
RAM Ratio : CPU/10
RAM Timings : 2-2-2-5
----------------------------------
Slot 1 : 512MB (PC3200)
Slot 1 Manufacturer : Corsair
Slot 2 : 512MB (PC3200)
Slot 2 Manufacturer : Corsair
Slot 3 : 512MB (PC4400)
Slot 3 Manufacturer : Gskill
Slot 4 : 512MB (PC4400)
Slot 4 Manufacturer : Gskill

This post has been edited by Westley: Feb 14 2006, 06:56 PM

Hey guys these came in the mail today from Corsair. Anybody know what chips they are?

Infineon BE-5

This post has been edited by apexi78: Feb 17 2006, 11:09 AM

Thanks for the info. What are the characteristics of BE-5?
highest voltage? normal OC speeds and timings? anybody?

http://www.madshrimps.be/?action=getarticl...609&articID=397
there is some info

http://www.xtremesystems.org/forums/showthread.php?t=67762
Gundamit | 2x1GB Patriot PC3200 LL - Infineon BE-5 | 2.5-3-2-6 1T @ 265MHz | 2.75v | Link! - SPi 32M Stable: Yes
Professor12 | 2x1GB Mushkin Hi-Perf Blue - Infineon BE-5 | 2.5-3-3-6 1T @ 262MHz | 2.7v | Link! - SPi 32M Stable: Yes
varzmaster | 2x1GB Corsair ValueSelect VS1GB400C3 - Infineon BE-5 | 3-4-3-7 1T @ 260MHz | 2.8v | Link! - SPi 32M Stable: Yes
NinjaWreck | 2x1GB Mushkin Hi-Perf Blue - Infineon BE-5 | 2.5-3-2-6 1T @ 258MHz | 2.9v | Link! - SPi 32M Stable: Yes
rise4310 | 2x1GB Mushkin Hi-Perf Blue - Infineon BE-5 | 2.5-3-3-8 1T @ 257MHz | 2.75v | Link! - SPi 32M Stabe: Yes
CP-Geek | 2x1GB Corsair CMX1024-3200C2 v1.2 - Infineon BE-5 | 2.5-3-2-6 1T @ 255MHz | 3.0v | Link! - SPi 32M Stable: Yes

this shows that average Be-5 doing 250+/-

hmm...not bad....summore low timings.......

lol..there u go....got ur answer pretty fast eh? heheh..