mine is TCCX...
juz now try at 250@2.5-3-3-5...2.8v stable,265@2.5-4-4-7 2.8v

Try CL2.5...

maybe that is UTT/BH5 chipset,can't boot up as CL3.0

swt....got new A8N-SLI Premium edi...i send the motherboard for warranty...hope can claim...

I wonder what cause/factor i cannot make the XMS PRO stable at dual channel mode ?

Each stick run Prime95 12hours no problem,
but once put together in dual channel mode,
Prime will failed after 1hour...

any idea to help me ?

Any of you guys running these modules on intel?

I'm having trouble running it at high fsb with my i865 mobo. can do 220mhz 2-2-2-5-1 but just stuck at 245mhz fsb even at the worst latencies.

you mean in default or ovecloked condition? be mind that single channel is always clocked better than dual channel.

HArd to find Intel platform users here also.Currently only found Guriseruda is using 1Gb Corsair XMS TwinX PC3200 Pro Series max out at 265Mhz only.Dunno how much the is RAM voltage and the latency he is using.

In Overclocked condition...

oops... your luck not so that good

Where's Guriseruda? need some advice. I've already burn-in and prime stable at 2-2-2-5-1 (220Mhz) and 2.5-3-3-5-1 (235Mhz). 245 at 3-3-3-8 also cannot. at 250Mhz won't start windows. geram

my cpu confirm can go at 250Mhz fsb default.

Loose timing aslo cannot go more than 235Mhz?Try to add more voltage on your vDimm.

2.85V already bro. a bit higher and i can cook it already

damn, i only wish i can run 250mhz 1:1

anybody else using these rams on intel platform?

Suppose this Corsair XMS TwinX has good o/cbility at 250Mhz using 1:1 division.Why the results seems like disappointed me.Maybe the limitation of the chipset on mobo?

yeah, i'm wondering if it's my mobo. but it's a p4p800 deluxe, among the best intel S478 platform. ppl have achieved wonderful results with this board.

i'm now running DDR400 with the most aggresive timings possible inc. 7.8 microsec refresh rate at 5:4. How I wish I can run at 250Mhz 1:1

try again bro!!!maybe there're something wrong in your timing..or maybe your system,but i think your system is good enough bro..so try your luck again

btw,this is my Corsair TWINX Platinum C2PT BH5 chip can do 255Mhz@3.35V

This post has been edited by [the][matrix]: Apr 13 2006, 02:59 PM


Attached thumbnail(s)

how about latency??

try 2-2-2-5 and see how high can go ya

2-2-2-5 kenot stable at 225Mhz @ 3.35V ...but i can reach 260Mhz @ 3.4V with 2-2-2-5 ..but forgot to take the screenie...will try to up again when get my new PSU

woow... 260 @ 2-2-2-5, 3.4v prime stable?

32M dun pass yet..oni 16M i tot very stable @3.45-3.5V for 260Mhz