ahucs, if the steering senget, but the wheel is ok, meaning even senget, the car dont go to the right or left during straight line driving,then is not bad allignment, just the steering need to adjust. Just send it back immediately after doing it.
But if u send to prtn sc when the chamber is already with adjustment nuts, then need to change to original nut coz already mentioned, when adjusting chamber, u already changing the factory default setting. Even allignment is correct, but sometimes its not precise coz u already alter the chamber setting.
Thats why, there are some says, 1st year, r n h ok, after that, not nice n not the same. If u still within factory setting, the allignment, the chamber(no adjustment), stock rims, it will not iff much unless the shock is already worn. But if change, even the rims, need to be careful, if can, stick with manufacturer size n width. If can, use stock rims. If want better handling n comfort, easiest way is to opt for better set of tyres. For performance, re 002, ps3, fi directional@ultimate f1 assy 2, is a better option. For comfort, premacy lc, cc5, conti premium n etc also a good oftion.
The stock tyes are uhp tyres for that particular co, so, shud be good replace it with same category of tyres. Xm 2 is good, but diff category, better opt ps3 then.
But dont worry, if steering senget, its a short fix, unless the car tend to go to the right @ left side on straight stretch, then, need to realign back. Jsut send it back, no need to pay again. Make sure its prtn sc, not authorised dealer prtn sc(3rd party).
Bye then.
Added on April 22, 2012, 1:12 pmone more thing, make sure u check everything(the car) n the sa explain on bcm, test driving it,if satisfied, then signing. If not, dont, ask for replacement or fixing if major, minor, remarks on the form. Major means need to send back to hq or factory to rectify, minor, nearest prtn sc can fix it.
Prtn is commited to be better, so, do a favour, if product dont satusfy u, dont take it, so that easier for them to take action to those involve, whether vendors or even their own assembly workers. Dont worry, its ur right.