Local Tx Power: 11.95 dB
Remote Tx Power: 12.56 dB
Local Line Atten.: 63.5 dB
Remote Line Atten.: 31.5 dB
Local SNR Margin: 5.5 dB
Remote SNR Margin: 6.0 dB

Mine looks like it's gonna make me commit suicide ... DC every few minutes ...
Technician checked my house wiring adi ... Nid to wait until HARI RAYA finish then they only cal the management section to check the cable somewhere ...

This 2 weeks gonna kill me ...


Attached thumbnail(s)

what if i hav a good SNR but poor line attenuation

SNR (down) = 21.0
SNR(up) = 21.0

line attenuation(down) = 58.6
line attenuation(up) = 30.5

what does this mean??...


This post has been edited by SoLiD: Oct 18 2006, 06:54 PM

Any idea how to increase the SNR margin ?? Any Sifu can give some idea .. ??

No good. High attenuation. Like usual, it may be caused by damaged cables or faulty splitters.

You have to ensure that the phone cables used are in tip top condition. The control of SNR margin is with tmnet. You just have to consult them for assistance.

Oh ... Thanks for the guides ..

i just found out the problem with my dsl light keep blinking comes from my living room's light bulbs.... 2 years...

From Miri. Amazingly can go down to NEGATIVE dB before disconnect.

This is tonite, every minute. Lousy streamyx.

Your download is 352Kbps only ??
What package you using ??

This post has been edited by R3Ju7Ce: Oct 21 2006, 10:32 AM

Once so called promotion by TMnet to 1.5mbps/512kbps connection, my download SNR has dropped like crazy.
From the beginning near 30dba to around 6dba now, frequent disconnection.

Able to get higher SNR on glite as the download speed is slower and more stable connection.

512Kbps so I did make a complaint and have yet to see any TM tech do anything.

Which is why I never want to "upgrade" my connection speed. heck I'm thinking about ending my Streamyx connection altogether. I still have access to my office Streamyx (which is more stable). Waste of money.

They still in raya mood ...
Perhaps another 2 ~ 3 week on the waiting list ..

Maybe you can post up your screen shot of the SNR margin at here ??

Are most DSL blinking problem solved by TM technician changing the copper cable?

Does Noise filter will iincrese the SNR margin ??

Wat do you guys think about mine? I get frequent DC...very slow d/l rates
considering it's a 1mb line.... festive period promotion my ass
Called TMnut already almost everyday to bug them ..not like they're doing anything.. anyone knows any other method to fry their ass?


Modem Status
Link Status Connected
Us Rate (Kbps) 512
Ds Rate (Kbps) 736
US Margin 17
DS Margin 6
Modulation MMODE
LOS Errors 1
DS Line Attenuation 56
US Line Attenuation 63
Path Mode Fast Path

At least 17 mah, mine 5-6 SNR, ..feel like wanna stop streamyx

u have access at office but I'm not.

I would glad if they just stick with 1mbps/512 or 512/384.....

high bandwidth only work for those who lives very near to the exchange point.
Those who 5km++ from the exchange point may not get anything more than 512kbps(to have a stable connection)

Super unstable line connection drops every few hours or so, and some times even though it's supposed to be connected at 1024Kbps it takes 1/2 a minute to load even lyn, I've changed the wiring in my house 4 times to no avail, and after many complaints to fix the junctionbox outside my house have fallen of deaf ears, any suggestions?

DSL Status: UP
DSL Modulation Mode: Auto
DSL Path Mode: INTERLEAVED
Downstream Rate: 1024 Kbps
Upstream Rate: 64 Kbps
Downstream Margin: 20 db
Upstream Margin: 2 db
Downstream Line Attenuation: 59
Upstream Line Attenuation: 63
Downstream Transmit Power: 15
Upstream Transmit Power: 12
LOS Errors: 0

This post has been edited by SetaNoriyasu: Oct 27 2006, 09:14 PM

any comment? i'm experiencing "halt" ing while loading that sometime result in error-404