my Aztech router can't check the attenuation and other information about the phone line, so any other method to check? i have try look through all the information in 192.168.1.1 but no information regarding attenuation showed.... pls help... thx

Modem Status
Modem Status
Connection Status Connected
Us Rate (Kbps) 512
Ds Rate (Kbps) 704
US Margin 11
DS Margin 3
Trained Modulation ADSL_G.dmt
LOS Errors 0
DS Line Attenuation 47
US Line Attenuation 31
Peak Cell Rate 1207 cells per sec
CRC Rx Fast 4896
CRC Tx Fast 4
CRC Rx Interleaved 0
CRC Tx Interleaved 0
Path Mode Fast Path
DSL Statistics
Near End F4 Loop Back Count 0
Near End F5 Loop Back Count 0

can anyone please help me tell if this is fine? thanks

Most of the time this thread is deserted. The experts aren't around currently I think.. Wating patiently..

hi guy how about mine ...thx Q



here is ping tm.net.my


This post has been edited by ask8900: Apr 2 2010, 06:25 AM

Man... me almost same with u...

I called TM come to Change my telephone line... From Tiang to my home... after that... wow.. cool SNR Margin up to 28+...(coz my phone line some noisy and keep dc... )

then 2moro TM call to comfirm it fixed or not... i say good.. nice.. now is stable...

after that 1 day later... DC again.. the problem is back. I call again... he come and check... he said line seen ok... maybe u need to change the house phone line(Cable to the Wall Socket)... say wan cost me RM80. but i reject. coz tat time he come the line is ok. after he go few minute... then line noisy again......

until now...the problem still same... specially when night or raining day.... ( I think is the tiang cable is loss nine jor...?) haizz...

CANT DONWLOAD CANT GAMING WITH FREIND... but pay every month.. SAD~

US Margin 21
DS Margin 29
Trained Modulation ADSL_G.dmt
LOS Errors 0
DS Line Attenuation 47
US Line Attenuation 20
Peak Cell Rate 1207 cells per sec
CRC Rx Fast 0
CRC Tx Fast 0
CRC Rx Interleaved 16
CRC Tx Interleaved 338


how about mine??

Seems ok but a bit high on the DS Line Attenuation (Downstream) but still within the "good" category so its ok.

Overall your line should be nice and stable.

no body can tell me my is ok of not ?????

according to the chart in 1st page..ur line is awesome le =p

my modem keep disconnecting tis few days..
dunno wat is wrong..
when it disconnect, i kenot access my router page.
but dsl lite is there...
i need to on off the modem only it works..
any1 can help me?

on streamyx n using linksys wag200g modem router

thanks

--------------------------------------------------------------
DSL Status: Connected
DSL Modulation Mode: MultiMode
DSL Path Mode: Interleaved
Downstream Rate: 1532 kbps
Upstream Rate: 509 kbps
Downstream Margin: 7 db
Upstream Margin: 21 db
Downstream Line Attenuation: 56 db
Upstream Line Attenuation: 18.5 db
Downstream Transmit Power: 14 db
Upstream Transmit Power: 18 db

This post has been edited by sohailili: Apr 24 2010, 05:31 PM

My internet keeps disconnecting, but when i leave the phone up no disconnection occur, this is a temporary solution but i can't have the phone up all the time.

When i pick up the phone i can hear noise like ssss,sssss. What could be the problem? Phone line? Server? What can i do and who do i call to fix the problem?

ADSL status shows the ADSL physical layer status.

ADSL Firmware Version: 4.03.03.00 - 3.02.00.03 - 4.02.01.00 Annex A - 01.07.02 - 0.49
ADSL Software Version: V1.00B02T02.MA.20050224
Line State Connected
Modulation G.dmt
Annex Mode ANNEX_A
Max Tx Power -38 dBm/Hz

Item
Downstream Upstream Unit
SNR Margin :6 18 dB
Line Attenuation:39 23 dB
Data Rate:2048 512 kbps


sien..been complainting n calling streamyx for 1-2 month and the problem still cannot settle...

This post has been edited by kiddo87: Apr 27 2010, 11:13 PM

I just moved to a new house and transferred line.



SNR Margin: 10.2 7.7 db

Line Attenuation: 12.9 6.2 db

Data Rate: 2048 509 kbps

how does this look? bad? download speed with MU depends on IP. Sometimes only 20kbps...sometimes 190kbps. Could the SNR margin caused it?

will take all feedback as possible solution.

---

Added on April 29, 2010, 4:46 amI've tried replacing the micro filter/wires of the phone and my wireless router. it does improved however i'm concerned whether it wil revert to the previous shitty state within 10~20 minutes afterwards

This post has been edited by morpheus3929: Apr 29 2010, 04:46 AM

hi. what about mine ?


Modem Status
Modem Status
Connection Status Connected
Us Rate (Kbps) 512
Ds Rate (Kbps) 1024
US Margin 26
DS Margin 31
Trained Modulation ADSL_G.dmt
LOS Errors 0
DS Line Attenuation 12
US Line Attenuation 5
Peak Cell Rate 1207 cells per sec
CRC Rx Fast 0
CRC Tx Fast 0
CRC Rx Interleaved 0
CRC Tx Interleaved 0
Path Mode Interleaved

---

Added on April 29, 2010, 9:31 pmUS mean Upstream
DS mean Downstream

?? thanks u!

This post has been edited by fongzai92: Apr 29 2010, 09:31 PM

---

Added on April 29, 2010, 4:46 amI've tried replacing the micro filter/wires of the phone and my wireless router. it does improved however i'm concerned whether it wil revert to the previous shitty state within 10~20 minutes afterwards


called TM on 3rd APR and today 'the mat rempit' contractor came and check my telephone line (confirms what i thought )and recommends me to get a new phone line for long term use or get a new better quality micro-filter which i did from ACE hardware. Well hope the speed will be stable afterward because i hate relying TM on their tech support and rather be pro active solving my issue.

---

Added on May 4, 2010, 10:52 pmi think i'll get new lines instead.

This post has been edited by morpheus3929: May 4 2010, 10:52 PM

SNR Margin
25.0 15.0 db
Line Attenuation
24.0 12.0 db
Is it good ?

This post has been edited by tashfinsheikh: May 7 2010, 06:58 PM

This has probably been asked a thousand times, but how do I check my SNR margin? There doesn't seem to be anything on it on my status page (I'm using a Linksys WAG120N modem-router). There's figures for downstream and upstream but that's it.

Mine looks like this.


Downstream rate - 3384Kb
Upstream rate - 507Kb

DS margin - 4
US margin - 19

DS Output Power - 118
US Output Power - 187

DS Attenuation - 47
US Attenuation - 27

everything here changes when I restart my modem router.

Is this good??

This post has been edited by nonname: May 14 2010, 06:27 PM

is mine ok?? please advice...