Mine is:

Firmware Version:
3.13.13 Build 130325 Rel.34960n
Hardware Version:
WR1043ND v1 00000000

Works fine with my TIMES fibrebroadband.

Hi

I been using this 1043ND v1.8 model for UNIFI for 1 years plus and now switching to Maxis Fiber.

there is a maxis fibre firmware for v2.0 but not v1.8.

may i know is there a way to upgrade to work with maxis fiber?

if no way, then i can sell it off for 50 bucks.


any specialist advise here? thank you

Change the firmware to OpenWrt.

i did change to openwrt but till now i cannot configured it right.... can u plz show i the link to setup for maxis-astro?


thanks

https://forum.lowyat.net/topic/2481658

This post has been edited by sHawTY: Jan 30 2014, 02:13 AM

Guys, I just bought this after reading KLSeet. I installed DDWRT on it successfully.

However, I'm unable to connect it to the internet. Did anybody here able to resolve this issue??

FOR EVERYONE THAT CANNOT GO ONLINE

I assume you meant you are using the stock firmware from TP-Link.

Do not connect your computers/laptops to LAN 1. LAN 1 is for IPTV. I found that out when calling their customer service.

You should be able to conncect to the internet if you leave LAN 1 empty (didnt try IPTV).

I keep seeing this question again and again so i thought this will help. But please....read the post above mine...i have my own problem too. Please help.

This post has been edited by kkc: Mar 16 2014, 08:22 AM

Currently running Open WRT 10.03.1 and it's been running perfect (unifi 5mbps)

Internet is at max speed and WiFi is pretty great

Is the WAN port gigabit too?

I'm running on the same version, same router, but after following KL Seet's setup guide, it seems router in unable to connect via WAN interface. Unable to connect to PPPoE. It seems the WAN port is disabled or so.. Username and password is correct, setup follow exactly the same as KL Seet's guide....

There was a bug where WAN port is disabled upon flashing on later HW version of 1043ND

Check OpenWRT WiKi

i bricked it while trying to reflash back to TP Link f/w last night

I think i found the link with solution here: https://dev.openwrt.org/ticket/11898

Paste it here to help others with the same problem.

I bricked my router while trying to flash it back to original F/W to test the WAN port.

It behaves like a christmas tree now.

Power - LED ON
Initially - SYS, WLAN, USB, QSS - Flash once
Then - LAN 1 - 4, WAN - Flash once
(Then the cycle repeats)

Any luck with un-bricking my router??

This post has been edited by ee7han: Jun 27 2014, 11:19 PM

Try sending them back to TP-LINK. Sometime they do exchange

Else try the service from this user
https://forum.lowyat.net/index.php?showtopic=1498281&hl=

There is a bug



https://forum.lowyat.net/index.php?showtopic=3162958&hl=

seriously, after so many years using it.. only now i know there's bug on WAN..

which i am 1 of the unlucky who get it as well.

no wonder everytime i restart/reboot the router the WAN won't connect.

Needa reboot 2nd times only it will works..

i thought it's unifi problem.


gonna follow this to fix: https://forum.lowyat.net/index.php?showtopic=3162958&hl=

even openwrt wiki itself also stated: http://wiki.openwrt.org/toh/tp-link/tl-wr1...sy.installation


anyway, it's still not too late to know