anyone using sshd with dd-wrt?

I'm experiencing frequent reboot when ssh server is running and connected. I tried standard stable build of dd-wrt as well as the latest beta.
Same issue. Any suggestion?

What is the maximum size of USB storage supported by this router? 1TB? Anyone tried?

Four months and no reply?
I also would like to know.

I tested 1TB...no problem

HI Guys,

Does anyone know if the TP-Link WR842ND works with Unifi out of the box or if there is a firmware for it?

Thanks Kindly
Jon

i bought this router today but i cannot connect to internet,it shown no internet access but my iptv working well,any1 know how to solve this?..thanks.

Out of the box, I bought it around mid FEB 2013 with directly support Unifi.

Thanks mate

Just to clarify works for UNIFI IPTV also ya?

I used it for streamyx. But my friend using it with Unifi and IPTV also works.

hello guys, i've just got my 1043ND from digital mall this evening. The whole configuration was totally nightmare to me. Firstly, I barely gets into its WEB configuration page. Once I setup with all the information required, I reboot the router for the settings to take place. Once it has done rebooting, I couldn't login to the WEB configuration page again. So, I reset my router and reconfigure again. The whole process repeated for more than 3 hours until I gave TP link a call. Then the lady technician told me that it should be the firmware problem. So I should upgrade my firmware instead. So did I. After upgrading the firmware, I managed to login to the web configuration page after reboot. Then, the router starts to connect to the internet but it has been connecting for more than 15minutes but nothing changed. So, I suspect that my ID/PASS could be wrong. So, I called unifi to double confirm my user/pass, which is right. Until now, the router is still connecting. So disappointed and tired of this nonsense.

Anyone experience the same problem?

This post has been edited by kian26: Apr 15 2013, 12:10 AM

Try flash to OpenWRT firmware and follow guide from KL Seet.

Tried flash to OpenWRT from KL seet. Now, can't get to web configuration page at all. Feel like hammering this router d.

Hey guys, i have an issue like below message that i send to TP-Link (does any1 have the same issue)

"I just bought the TP-Link on 13 April 2013. Model is TL-WR1043ND to replace my D-Link 615 (from Tmnet Unifi). First day confirgue everything done (Unifi Mode) and I able to use the modem to connect internet and Wifi can connect. After that 3days
1. 1st error is my Pc and some other housemate was not able to connect Wifi (keep connecting & disconnecting), if we use LAN cable we able to connect internet. But thing had not stop there, just the day after which is 4days after I bought the modem.
2. In the morning I facing 2nd error which is I unable to connect internet using LAN cable, worst thing that I can not even connect to TP-Link Management Page which is 192.168.0.1, I looked the TL-WR1043ND and realized that the system light is not ON (not blinking not function). I try Wifi then keep connecting and disconnecting. Then I try to reboot the modem by OFF => ON back the switch. And I able to connect Internet + TP-Link Management Page through LAN cable. Then I tried Wifi and I able to connect to the router and after that Internet + TP-Link Management Page.
3. I thought it was done and just like 1 time error only. Who knows the modem only work fine for 1days (not even 24hours). The next morning it is happen again the 2 error code mention as above. Then I do reboot by OFF then ON back. It worked for like 2 days. Then 7 days, it is happen again and I quite fraustrated about it, so I called TP-Link Tech Support at 1300 8887 5465 then they advise me to update the firmware to the latest which is TL-WR1043ND_V1_130325 (my current firmware is TL-WR1043ND_V1_120605) Once I update it is showing successfully but the TP-Link Management Page did not refresh back to Home Page (it was hang at the Successfully Update Firmware Page for like 30minutes) so I called the Tech again then they advise me to press Reset button for 10 second and let the modem restart but seems nothing happen after I press cause according to Tech Agent said it will reboot and all light will flashing/blinking but nothing happen all light is ON (no flashing/no blinking) seems light no reset. So Tech Agent advise me to contact reseller since still in 7days 1 to 1 exchange, so immediately that day I contact reseller to exchange 1 on 1.
4. I brought the modem back and install follow instruction paper (also choose Unifi mode). Everything successfully done and able to use for 1st day which is 21st April 2013, guess what after that day 22nd April, all my PC, especially my friend PC was not able to connect Wifi (keep connecting and disconnecting) same as previous modem. Then ask the try to use cable and they can connect to Internet.
5. And it so annoying by today morning I woke up and I found even LAN cable also can not connect Internet especially sys light on the router is not ON (not blinking) and I know for sure I was not able to connect TP-Link Management Page, guess what I was correct. So I reboot the modem by OFF then ON then everything back normal but Wifi can not connect."

I think most likely is the Unifi Mode, i have not try in Normal mode. Because i feel like what the point buy this modem to get Unifi now if use normal mode maybe can try the normal one maybe cheaper or expensive like Linksys but better not like i having right now.

TP-Link Technical is all china people. and i really can not understand what they said even mandrin. Fraustrated with this modem/router. Any1 got any idea. i dont want to keep go here go there or exchange again again.

guys.. i got a slight problem
UNIFI modem = HUAWEI
light
LINK= ON
LAN1 = NO light
VOIP = ON
TEL1 = ON


does that means my TP-LINK 841ND's WAN spoilt?

anyone using 1043ND v1.10 ?

is there anyone know how to enable openwrt QOS?

hi, Just bought the TL-WR841N yesterday. Setup everything as per normal, but also having the same problem as some of the other users here. Keeps showing 'connecting....' but never connects. Any idea what could be wrong? Tried following klseet's guide and still the same.

My firmware is v8 and supports Unifi.

i think i just bricked a 1043nd when i tried to flash it to OpenWRT...

after the firmware is successfully upgraded, it won't automatically refresh the page... so i wait for 1-2min also nth happen, i manually hit the refresh button... 192.168.0.1 cannot be access anymore... same goes to 192.168.1.1... i can't do anything but restart the router physically... guess what? the SYS light no longer appear ... and i can't even use the FailSafe mode taught at KLSeet website... feel like wanna die... sien...

Hey guys,
I'm facing disconnection problems since last week after upgrading my UNIFI from 5mbps to 10mbps. The problem starts when I start downloading using utorrent. The internet for the downloading pc just goes off while LAN connection still works. Happened on both my computers. Any input to solve this issue? Thanks