Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
129 Pages « < 23 24 25 26 27 > » Bottom

Outline · [ Standard ] · Linear+

 LYN Proton Saga/Iswara Drivers' Forum! V25, Keep it up!!! Old and Retro machines

views
     
poolcarpet
post Jan 3 2012, 03:37 PM

On my way
****
Senior Member
548 posts

Joined: Sep 2005
From: Mars
I believe the alarm sound is just the alarm siren or connection problem.

For the knob popping up again immediately when you lock it, is it happening only on 1 door or all 4 doors? If 1 door only, you may need to remove and check the actuator. After some time, you need to lubricate all the moving parts of the actuator (use WD40) or if it's faulty, replace it original costs about RM50 or so I think.

If all 4 doors popping up, then I have no idea sorry smile.gif maybe alarm kaput?


QUOTE(chris_xi @ Jan 3 2012, 12:53 PM)
hi guys there seems to be a problem with the alarm of my '03 Iswara 1.3S. i took over from my father whom i think is a rough driver lol. about a month ago the alarm sound was slowly fading off whenever i activate it, and it's completely mute now for a couple of weeks. i thought it's not going to be a problem. just now when i activate it (unlock) to retrieve something from the car, it was ok. then problem came when i tried to lock it. the door locks pop back out as soon as it shut down. the next thing i saw was blinking of the turn signals without sound since it's mute now. the problem seems to be recurring and i had no idea but to lock the door manually.
what seems to be the problem?
*
low yat 82
post Jan 3 2012, 04:45 PM

time is nearing to end
*******
Senior Member
4,081 posts

Joined: Aug 2005



usual d front door will pop up back if u try lock it witout tarik d door handle...
cyanboy
post Jan 3 2012, 04:56 PM

Getting Started
**
Junior Member
257 posts

Joined: Oct 2009
QUOTE(poolcarpet @ Jan 3 2012, 03:37 PM)
I believe the alarm sound is just the alarm siren or connection problem.

For the knob popping up again immediately when you lock it, is it happening only on 1 door or all 4 doors? If 1 door only, you may need to remove and check the actuator. After some time, you need to lubricate all the moving parts of the actuator (use WD40) or if it's faulty, replace it original costs about RM50 or so I think.

If all 4 doors popping up, then I have no idea sorry smile.gif maybe alarm kaput?
*
Tumpang bit... If want to access the actuator need take out the door panel then door plastic right?
The black rubber sticky thingy that sticks the door plastic is what ah? Spare part shop ada?


QUOTE(ILikePie @ Jan 3 2012, 12:11 AM)
I mean OEM one same like cyanboy's hose biggrin.gif
*
Lol... For aftermarket CAI guide... > http://forum.lowyat.net/index.php?showtopi...&#entry16327860

For OEM here:
QUOTE(cyanboy @ Dec 2 2011, 11:00 AM)
You can try get this CAI hose for RM60 without metal fastener at:
AME AUTO PARTS (PJ) SDN. BHD.
25, Jalan 21/11A SEA Park
Petaling Jaya 46300
Selangor.
(Beside CIMB Bank)

I just bought mine from there. It's a bit more expensive than where neosaint99 got it. But since it still have stock so okok lah... The stock one looked very nice in engine bay.

I asked the boss there he say still have some stock... He say if want more maybe need order (Since not in production dy means that's all left) Maybe can try there?
*
This post has been edited by cyanboy: Jan 3 2012, 04:59 PM
poolcarpet
post Jan 3 2012, 05:09 PM

On my way
****
Senior Member
548 posts

Joined: Sep 2005
From: Mars
Yes to access actuator remove the door panel then plastic. Those black stuff will still be sticky after that you can just restick the plastic back. If you don't plan to remove the actuator, make sure you have a long nozzle spray as it's quite hard to see/access it. If you plan to remove then i think it's 2 to 3 screws holding it in place cannot remember exactly how many but not hard to figure out.

QUOTE(cyanboy @ Jan 3 2012, 04:56 PM)
Tumpang bit... If want to access the actuator need take out the door panel then door plastic right?
The black rubber sticky thingy that sticks the door plastic is what ah? Spare part shop ada?
Lol... For aftermarket CAI guide... > http://forum.lowyat.net/index.php?showtopi...&#entry16327860

For OEM here:
*
chris_xi
post Jan 3 2012, 06:19 PM

Getting Started
**
Junior Member
244 posts

Joined: Nov 2005
QUOTE(poolcarpet @ Jan 3 2012, 03:37 PM)
I believe the alarm sound is just the alarm siren or connection problem.

For the knob popping up again immediately when you lock it, is it happening only on 1 door or all 4 doors? If 1 door only, you may need to remove and check the actuator. After some time, you need to lubricate all the moving parts of the actuator (use WD40) or if it's faulty, replace it original costs about RM50 or so I think.

If all 4 doors popping up, then I have no idea sorry smile.gif maybe alarm kaput?
*
i wonder what are the consequences of the muteness of the alarm sound if i prefer not to fix it as it seems to work properly (just without the sound)

tricky ones, it happened the first time on all doors, then only the right front and back door in the following times.

*but then when i made sure all the doors, hood and boot are closed properly, the popping out of the knob and the mute siren didn't happen anymore* hmm.gif
cyanboy
post Jan 3 2012, 08:32 PM

Getting Started
**
Junior Member
257 posts

Joined: Oct 2009
QUOTE(poolcarpet @ Jan 3 2012, 05:09 PM)
Yes to access actuator remove the door panel then plastic. Those black stuff will still be sticky after that you can just restick the plastic back. If you don't plan to remove the actuator, make sure you have a long nozzle spray as it's quite hard to see/access it. If you plan to remove then i think it's 2 to 3 screws holding it in place cannot remember exactly how many but not hard to figure out.
*
Ooo... But mine got some parts dried up dy... Can't stick well... Maybe will take a look tomorrow...
Btw you know what's that called?

QUOTE(chris_xi @ Jan 3 2012, 06:19 PM)
i wonder what are the consequences of the muteness of the alarm sound if i prefer not to fix it as it seems to work properly (just without the sound)

tricky ones, it happened the first time on all doors, then only the right front and back door in the following times.

*but then when i made sure all the doors, hood and boot are closed properly, the popping out of the knob and the mute siren didn't happen anymore*  hmm.gif
*
Your car siren auto update ah? Now P1 and P2 cars lock/unlock no sound one... But will the siren work when alarm triggered? Thats more important nod.gif
Check the siren cable is it torn/short circuit or what... But since in your case the siren getting softer to mute, maybe siren went heaven? (Wonder how the siren can be abused) blink.gif

For the door locking maybe check central locking module?
But siren and central locking module never "kong" before in my proton's life...

This post has been edited by cyanboy: Jan 3 2012, 08:37 PM
ILikePie
post Jan 3 2012, 11:17 PM

New Member
*
Junior Member
13 posts

Joined: Jul 2011
Sadly, I'm in East Malaysia tongue.gif
cyanboy
post Jan 4 2012, 12:06 AM

Getting Started
**
Junior Member
257 posts

Joined: Oct 2009
QUOTE(ILikePie @ Jan 3 2012, 11:17 PM)
Sadly, I'm in East Malaysia tongue.gif
*
Did you try Proton stockist near your area?
If no then gotta try hard to find ur luck in half cut...
ILikePie
post Jan 4 2012, 09:37 AM

New Member
*
Junior Member
13 posts

Joined: Jul 2011
QUOTE(cyanboy @ Jan 4 2012, 12:06 AM)
Did you try Proton stockist near your area?
If no then gotta try hard to find ur luck in half cut...
*
Currently trying to find. Still in progress biggrin.gif
fleekreturn
post Jan 4 2012, 11:17 AM

Getting Started
**
Junior Member
51 posts

Joined: Dec 2010


My alarm whenever arming or disarming the locking mechanism at driver side is not moving. Need to manually lock/unlock using key. I just live with it. Haha.
poolcarpet
post Jan 4 2012, 11:21 AM

On my way
****
Senior Member
548 posts

Joined: Sep 2005
From: Mars
most prob actuator linkages need some WD40, or the actuator kaput already. mine had same prob on passenger side bodoh bodoh go buy the actuator RM50 to replace later found out just need some WD40. anyway replaced it since quite old already now cantik! smile.gif

QUOTE(fleekreturn @ Jan 4 2012, 11:17 AM)
My alarm whenever arming or disarming the locking mechanism at driver side is not moving. Need to manually lock/unlock using key. I just live with it. Haha.
*
fleekreturn
post Jan 4 2012, 11:23 AM

Getting Started
**
Junior Member
51 posts

Joined: Dec 2010


Spray at the gear there right?
poolcarpet
post Jan 4 2012, 11:30 AM

On my way
****
Senior Member
548 posts

Joined: Sep 2005
From: Mars
no, the linkages.... all the long rods linking the knob to the actuator. actuator itself nothing visible to spray, it's all the links i.e. to the door handle, to the door 'striker' whatever you call it. just remove the plastic and look at all moving parts when you push pull the knob and spray every link! smile.gif
fleekreturn
post Jan 4 2012, 12:27 PM

Getting Started
**
Junior Member
51 posts

Joined: Dec 2010


Oo that thing. Ok later will try it out.
DaBestOne
post Jan 5 2012, 12:49 PM

-LYN- 6 ★STARS★ Trader
******
Senior Member
1,329 posts

Joined: Sep 2007
From: Kuala Lumpur, Malaysia.



My friend is thinking of getting a 2nd hand Saga... Prefer the car to be within 10 years old..... budget is around 15k, do you guys think it's worth it?
poolcarpet
post Jan 5 2012, 01:14 PM

On my way
****
Senior Member
548 posts

Joined: Sep 2005
From: Mars
wah 2nd hand saga 15k for 10 year old? so good price? smile.gif

my iswara '99 i think can sell around 4-6k only, the last iswara year 2007 models also just a bit above 10k market price I think. but maybe if tip top condition well looked after probably worth paying a bit more.

You can check indicative market value here at www.autoclaims.com.my - will need to register for free account, and i think some valuation not accurate but good as reference point.

QUOTE(DaBestOne @ Jan 5 2012, 12:49 PM)
My friend is thinking of getting a 2nd hand Saga... Prefer the car to be within 10 years old..... budget is around 15k, do you guys think it's worth it?
*
Peekab0o
post Jan 5 2012, 01:23 PM

New Member
*
Junior Member
5 posts

Joined: Dec 2009
QUOTE(DaBestOne @ Jan 5 2012, 12:49 PM)
My friend is thinking of getting a 2nd hand Saga... Prefer the car to be within 10 years old..... budget is around 15k, do you guys think it's worth it?
*
Get LMST 2004-2007 models . Should cost around 10-13k nowdays then spend another like 1-2k change some wear and tear parts.. im sure no mather how good condition the car is... some wear and tear parts are definitely passed away already lol ...

A link to share...

http://www.carthrottle.com/racing-with-the-proton-saga/

brows.gif


And for those who are looking for oem CAI intake box ...

http://www.mudah.my/Proton+Saga+Parts-13181394.htm

This post has been edited by Peekab0o: Jan 5 2012, 01:31 PM
low yat 82
post Jan 5 2012, 04:37 PM

time is nearing to end
*******
Senior Member
4,081 posts

Joined: Aug 2005



QUOTE(fleekreturn @ Jan 4 2012, 11:17 AM)
My alarm whenever arming or disarming the locking mechanism at driver side is not moving. Need to manually lock/unlock using key. I just live with it. Haha.
*
same wit me icon_question.gif icon_question.gif


poolcarpet
post Jan 5 2012, 05:39 PM

On my way
****
Senior Member
548 posts

Joined: Sep 2005
From: Mars
hi all, anyone facing the autochoke problem in their iswara? morning start rpm low around 500, after warming up perfectly fine around 800-1000?

i asked a workshop nearby, he said can repair using a choke repair kit. total cost about RM150. i called local spare part shop, they said don't sell the kit.

anyone know where to buy the kit, and whether RM150 is a fair price to repair this? thanks!!
DSV4600
post Jan 5 2012, 06:38 PM

Casual
***
Junior Member
432 posts

Joined: Dec 2010


QUOTE(Peekab0o @ Jan 5 2012, 01:23 PM)
Get LMST 2004-2007 models . Should cost around 10-13k nowdays then spend another like 1-2k change some wear and tear parts.. im sure no mather how good condition the car is... some wear and tear parts are definitely passed away already lol ...

A link to share...

http://www.carthrottle.com/racing-with-the-proton-saga/

brows.gif
And for those who are looking for oem CAI intake box ...

http://www.mudah.my/Proton+Saga+Parts-13181394.htm
*
Yah, agree on getting the LMST models, as the milage won't be so high, and body all should be in good condition.
If got budget, look for the Merdeka Edition batch (2007 - 2008) models. Two colours only, black & orange.

And interesting article on the Saga racing.
thumbup.gif

129 Pages « < 23 24 25 26 27 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0282sec    0.92    6 queries    GZIP Disabled
Time is now: 24th December 2025 - 02:24 PM