anyone used homeplug before and what model work well ?

I have the same setup as the earlier post. Equipment all in the 1st floor of my house. I then used Aztech 110EP (200Mbps) for my IPTV downstair, it works flawlessly. For my another room downstairs, I bought HL208E (Gigabit network), however homeplug pair for internet and movie stream is disappointing. I cannot stream 720p HD movies and internet connection is not as fast as compared to computers upstairs. This could be due to the electrical noise and distance. So it depends on the wiring of your house.

Hi guys, i have been using UniFI for almost 6 months now. Recently my whole house has been extended, anyone knows any good or recommended technician to rewire the fibre optic cable for me? I called TM, they say need to go TMPoint cause it's outsource, and it is quite urgent now because i want to cover the wires before my house completion.

Please advice thank you.

I registered Vip 10 Unifi on the 14th this month and the confirmation letter states that my installation date is on the 14th of Dec exactly 1 month.

Than just this afternoon I got a call from Unifi that they will postpone the installation date earlier to the 25th of this month.

Is that kewl or what =)

ASUS RT-N12-B1

http://klseet.com/index.php?option=com_con...=122&Itemid=110

Yes, another Broadcom router from ASUS with custom firmware for UniFi !

Initial few hours quick test:
- both internet & IPTV no problem on my HG850a
- wifi is impressive at this class, strong, stable and transfer rate is good !
- device surprisingly not hot at all

This is the new model B1, uses upgraded chip compare to the first version of RT-N12.

Accordingly to ASUS, shipment is coming, should be in retail market soon, price should be very competitive, another affordable good option for those UniFi users who prefer Broadcom.

Will test further over the weekend.

klseet... You got DIR615 or not? Can help me try how to hook it up to 841ND? Now my setup goes from VDSL Modem->841ND and I want to use the USB on DIR615 for printer sharing. Tried to connect directly but it won't work. Might you enlighten me a bit on this? If flash to DDWRT I know it can be used but the USB port won't work right?
Mind help me check check what can I do here? Asked many times here no one answered me. Tried play around with the settings but still fail. Now if want print must connect to DIR615 wifi only can print, no internet when connect to that Wifi.

kewl!

i registered my vip5 just this wednesday.the confirmation letter states my installation on 3rd december.
then on thursday,they call me back & reschedule my installation to next coming thursday the 24th.

@IwanAGP

Walio, I really need to find where is my DIR-615 now ....

I could be wrong, I remember mine it's the G1 version and the stock firmware does not seem to support the USB function, is yours supported?

If yes, I'll go dig, but need some time, busy la bro ....

Yes. Supported! Just need SharePort software from either the CD given or download from D-Link then ok d. Confirmed working but the speed is really terrible for data transfer. Just for printing purposes only.

Try this to see whether it works.

Assuming your 841's IP is 192.168.1.1

- do not connect anything to the 615
- use another computer, connect to 615 either port 1~3 as usual
- go to LAN setup, assign the 615 with a static IP say 192.168.1.9, gateway=192.168.1.1 (this is the 841's)
- disable 615 DHCP, Firewall, wifi (if you don't need it), etc
- disconnect & turn-off the 615
- connect 615's either LAN 1~3 to 841's LAN port

Now you should be able to access the 615 by typing 192.168.1.9

mine on 25th too where u live at?

Hi guys, any other alternative to open port?
I did the port forward settings correctly on the dir615 but the port still isnt open.

How can i go about it to get it done?

Or getting another router will solve the problem. If so which router would u guys suggest.

Question, what should be the IP in my machine by default. I'm using manual ip and gateway + DNS address (Time DNS). On the router DNS has been replaced with TIME DNS..anyone can advise if thats the right thing to do??

No problem doing port forwarding on DIR615. Maybe you should try again?

---

Added on November 19, 2011, 12:57 amHey... Before answering... I want to tell you that your signature is against forum's rule which it some sort of "distorted" the layout of the forum. Maybe you will want to change it before your sig get nuke by Mod.

Btw, there's no default IP in any machine. Normally IP is assigned by router, otherwise you can set manual IP on your PC OR you can save RESERVED IP on your router for your PC. Time DNS better than Google? Free??

This post has been edited by IwanAGP: Nov 19 2011, 12:57 AM

only a few lucky customers get it.. not all.

Johor

IPTV need Router ON to watch. Unless you just OFF the wireless signal inside the router, but still need ON power the router.

If u really wants ALL things to be grd flr. I suggest not using Powerline or wired down from BTU from 1st to grd flr, unless you can left BTU & Dect Phone upstair.
If me, I will assign a Contractor to route the Fiber Cables to downstair instead, he may find ways through external wall instead.
If just recent u got unifi, u can call the Contractor directly the mobile provided to you & ask him to quote you cost.
2nd is ask outside Contractor who doing wiring. Ask to quote cost from all 1st, then only do.

I planning to get one later too.
May I know is it okay / good performance / stable, if I just buy an Asus Wireless Router connect to BTU and I do not do any custom firmware, can it still be good enough ?

If got USB model (download torrent) is even better that i prefer

?

bro from ur opinion

dis one
ASUS RT-N12-B1

compare with tp-link 1043ND

which one more better?
if u say asus
den later myb i wana change my tp-link 1043Nd hehe

I don't think you can use it without flashing to custom firmware due to vlan tagging problem...

1043ND not good enough for you
Heard my friend say till veli veli good one