Nope, I'm not using proxy.
Only when access to this TP Link site, I'll hide my proxy.

---

Added on May 12, 2012, 9:23 amOh ya, not even any OpenDNS or Google DNS. I'm using pure Maxis' settings.

This post has been edited by fruitie: May 12 2012, 09:23 AM

both file is the same, Sg and Mal

but the Australia's one is the latest Nov 21 2011, the one in the maxis3G thread

I have been using the latest firmware since the first day I bought it. Works well until today.

try flash it and and see if you can make it haywire and reflash it, maybe it works wonder, or try flash the MR3220 March 2012, the most latest on your mr3420 , dare or not?

Lazy. I don't see the purpose of doing it.

pls tell me your FW version, i wan try it to mine

thanks

mr3220v1_en_3_12_20_up(120309) latest firmware, 3g speed very bad if any usb cable between MR3220 & 3g modem

previous firmware no such thing.

What modem is that?

use a USB3.0 cable

e1762. no usb 3.0 cable

for E1762, use a cable that is not longer than 1meter (USB2.0) if its USB3.0 can use a 3 meter cable.

but better dun use any usb cable but position the router N E W S and see which gives u a better signal ,

yea totally correct, position of your 3G router really make a different

mine if facing E = 1.5Mbps and facing W = 6.8Mbps

facing W is good for u

thx for the heads up... i can access the page after changing my DNS... erm im sticking to AU firmware which is currently the latest for our 3420

Firmware Version:
3.12.19 Build 110617 Rel.39329n

okay, thanks

tonite i will burn midnite oil to flash it again.............

mine is the same as well

Can P1 or Yes USB modem support by this router?

I have tried YES dongle but it just wont work, keep on connection, sincerely Wimax and 3G are 2 different frequency..

i dont think they will work