i'm using digi dayplan, my burst speed is 1Mbps, minus the figure 2 in front ...

LOL... 1Mbps for digi consider very high speed,..

Tried this router with UMG1831 that bought from coolstore. It works well once it's identified correctly by router. But, the identify process takes ~5 minutes, is this considered normal?

I'm already at latest firmware

UMG1831 takes v long to initiate the modem from my experience.
Maybe you need to add in the modem bin file.

Anybody has luck to get a working bin file? I tried the sniffer tool several time but still couldn't get my bin file working for UMG1831. Looks like have to ask help from TP Link.

hi there, i'd like to recommend openwrt firmware for you or any other user using umg1831 with this router. it is considerably much more faster than the existing firmware.

---

Added on March 12, 2012, 6:24 pmthis is an excellent openwrt firmware that i have just discovered

Openwrt firmware

1) flash the router with this new firmware

2) to turn on the wifi after firmware update, wait until the 'sys' LED stop blinking and then press QSS button on the router. there will be 'openwrt' wifi

3) logon into http://192.168.1.1 .. the default username is 'root' and the default password is 'password'

4) go into network tab and you'll see two network interfaces. click 'edit' button for WAN interface and change the protocol to UMTS/GPRS/EV-DO then you'll be familiar with the setting. apn username password etc

5) customize your wireless setting security

done done..

This post has been edited by shinichi87: Mar 12 2012, 06:36 PM

Thanks for the guidance and will try it out this weekend...

---

Added on March 13, 2012, 11:57 pmJust can't wait and tried the firmware just now. The result is just amazing!!! The router takes 1 min 17 sec to boot and establish 3G connection with UMG1831. It's >1x faster than before.

Thanks for the tips!!!

Btw, we also need to choose correct USB under "Modem Device" in 3G setup and for my case, it's USB0. It also doesn't have 3G signal strength bar now and I just ignore other features as i don't bother about them.

This post has been edited by ks98: Mar 13 2012, 11:57 PM

how to setup OpenDNS FamilyShield with OpenWrt ?

OpenDNS FamilyShield
208.67.222.123
208.67.220.123

OpenDNS standard
208.67.222.222
208.67.220.220

Goto "Network" -> "Interface" -> LAN "Edit" -> Enter into "Use custom DNS servers"

Hi all, just bought my MR 3420 a few hours ago.
Anyone manage to get it working ith ZTE MF110 modem.

I still can't configure mine to work now.

I think you need to disable auto-run. The instruction is inside this thread.

This Router can support Huawei E353 perfectly,.. ^^ just though anyone wanted to know,..

I wondering does this router support LTE or not

Please help me... I'm going to buy this router soon and will use it with my unlocked huawei e1552. So the question here is how to configure moonlight vpn on this setup? TQ in advance.

Your moonlight VPN is using a software to connect it right?
If yes, just use the same method to connect it
Currently I'm using VPN with this router as well by connecting the software on the pc it self.
Do note, only work on that pc

This post has been edited by KKW: Mar 19 2012, 06:45 PM

just wanna express my gratitude to TS and others to contribute this thread to answer my question and resolve my problem. Keep it up!

@KKW thanks mate for the info. Appreciate it

Hi all,
i followed the steps mentions above to disable my ZTE Mf190 3G modem. but i wan unable to do so, below is the message after i press Enter in the command prompt;

'AT=ZCDRUN=8' is not recognized as an internal or external command, operable program or batch file.

do you guys face this problem before? how to solve it?
Thanks!

---

Added on March 23, 2012, 10:25 amsorry typo error, should be 'AT+ZCDRUN=8', not 'AT=ZCDRUN=8'

This post has been edited by sglalang: Mar 23 2012, 10:25 AM

You're most welcome, i just open this thread try to gather every knowledge everyone know about this router to share with everyone,.


if u have any knowledge u love to donate too, plase dont hestitate to post here,..

everyone is welcome to share

---

Added on March 23, 2012, 10:35 amdid u try ti use the putty in method 2 ?

This post has been edited by chuahcs79: Mar 23 2012, 10:35 AM

Yes...pls use putty way to disable auto run. I got d same problem like u but manage to solve with putty. Just follow d steps at page 1.