openwrt really doing a goodie for you

compare to days ago your speed is

that's was huge tremendous different,

Fruitie is Back on Track on highspeed wannabe

This post has been edited by chuahcs79: Nov 13 2012, 05:11 AM

wow, Fruitie also can do OpenWRT, i think i also can do then

meanwhile

Icon505M + V2 ,

I on the Router switch the same time i press the PC's switch and the connection is very fast, once i boot up internet is available already.





@Chuah, how is Icon505M on V1 OpenWRT?

from Chuah's instructions until the Network step, just click this Connect button on the WAN interface and it will disconnect and reconnect automatically.

Do we need still need internet connection to install openwrt?
Tak boleh tahan racun korang semua lah...

This post has been edited by hairul: Nov 13 2012, 10:03 AM

me too

SiFu Chuah, pls help

Yes

Explanation below

Stock OpenWRT come with no 3G module

Therfore you need an internet connection to install those 3G modules

No worries, there is a guide on first post for reverse tethering to your Modem

u need 2 thing :

- Lan cable ( with or without any network connection )
- usb modem ( if your lan cable have network connection, then u dont need this )


download 2 file:

- openwrt-ar71xx-generic-tl-mr3420-v1-squashfs-factory.bin ( openwrt firmware bin file )
- Putty ( downlod & run, dont need to install )


if u are flashing using Lan cable come with connection
refer video -> How to flash open wrt with extra Lan cable connection ( on first post )


if u are flashing using 3G modem alone + lan cable without any networking connection
refer video -> How to flash openwrt with 3G connection by sharing it via lan cable to router ( on first post )

---

Added on November 13, 2012, 12:28 pmthanks for that info,. i dont know press connect alone will manuall dc & reconnect

This post has been edited by chuahcs79: Nov 13 2012, 12:28 PM

I didn't know it either until i tried it. Well, the icon with 2 arrows kind of self explanatory.

yea that is refresh like icon , you are right

I think i will use my spare Router (Extender). So i will connect my USB modem thru PC
and share the network via router. So the router (extender), need to use WAN or LAN port from my PC?

After balik kerja nak kena buat jugak!!!

My MR342 was fixed to the celling and the USB port was extended by a 2meter USB3.0 cable, do i need to dismantle the router down for flashing?

However, the adaptor and LAN/WAN output is nearby my pc and i also have a spare internet connection from my Zoom and Mr3420 V2 ..........

Gonna bug you tonite after 2am

Where to DL TeamViewer and how to use?

if u have 3G modem alone,

then u need to share your 3G modem connection in computer Via lan to mr3420 ( lan cable plug in computer & mr3420 yellow port )

then u can flash openwrt and also update the packages component

Download here .. Portable, Just Extract & use. Spare in USB in case you need it as its Portable.
http://portableapps.com/apps/utilities/teamviewer_portable

Mine also near ceiling, maybe no need to put it down, stay where it is.
Just use network cable from V2 to V1 suppose should be ok

you are so like me

Cable for Antena only 2 Meter ma.. no choice but to drill hole near of the rooftop.
But still the coverage still abit blocking with my neighbor house..

well contact me when u free,

What makes you think that I'm so weak?
Remember I'm a geek lady.

Cool, thanks for the heads up!

---

Added on November 13, 2012, 3:17 pmNo star IP address.



Anyway, is there anyway how to disable from inserting password every time go into 192.168.1.1?

My password is a bit too long.

This post has been edited by fruitie: Nov 13 2012, 03:17 PM

Do put any password lah... hehehehe
Go to security/admin...

Yeah, if cannot will change to shorter password.

just dont put anypassword,

can erase the password under system-> administration-> RESET -> save & apply

seems like cannot reset, i just try,..

This post has been edited by chuahcs79: Nov 13 2012, 05:02 PM