Try save & apply and reboot your router. If USB0 is correct, it should make a connection on next boot.

Im think to have the below setup to download the package
Using another 3g router with 3g modem attached. How to connect it to my tplink router, to which port should i insert?
Thanks

Guys.. Hua Wei E367 or ZTE MF680 can support by this router or not?

u should connect your lan cable from another 3G router yellow color lan cable port into this tl-MR3420 router blue color lan cable port

direct insert and updates list

---

Added on October 27, 2012, 1:09 pmyes both can support,

if u worry,u can update router firmware to latest 120523 for V1 ~ V1.3

and download modem bin file from tp link websites and upload the modem bin file into your modem setting under network -> 3G

This post has been edited by chuahcs79: Oct 27 2012, 01:09 PM

Hey bro.. So i should get V1 or V2 router??

that's your personal choice,

for me, i would prefer V1~ V1.3 due to

can flash with openwrt

and V2 is not support by open wrt, plus the stock original firmware is quite buggy sometimes

and consistency is as superb after using with openwrt

[attachmentid=3123181]

This post has been edited by chuahcs79: Oct 27 2012, 01:48 PM

Thx i go for V1 then..

after i flash with open wrt, sometimes the IP i can keep until 5~7 days before it DC.

with stock firmware last time, i DC every 12~24 hour,.. and keep losing all those good IP address,

that's why i personally prefer V1~V1.3

just my feedback experience with openwrt compare with stock firmware

I just read the 1st page info about open wrt.. Quite complicated for me =/ Hope that my ZTE 680 can work with the modem perfectly..

for ZTE MF680, just direct plug int routr it will auto recognize and dial your ZTE MF680 modem

Excellent news.. thx sifu

i still stuck in between update package list.

What I have done so far is,

Connect 3G using mobile partner.
Share 3G using LAN port.
the port will automatic change to 192.168.137.1

then i plug out LAN port to Router BLUE port.
connect http://192.168.1.1

cannot connect at all into the web interface.

i stuck 2 things:
1. not able login router web interface
2. not able download package


struggle to overcome this problem by using :

putty
and
configuration on LAN setting


This post has been edited by danieltan: Oct 27 2012, 02:58 PM

first of all u are using pc or laptop ?

any wifi connection ?

laptop, windows 7

got wifi connection but using mobile partner to connect it




ping router 192.168.1.1

why not u try this:

your router is fully flash with open wrt right ?

just not yet updates list and install packages correct ?

u can connect your lan cable to router yellow port as usual,

then use your browser to login 192.168.1.1

no password needed for first time, just direct click login

after that set your wifi first, under network -> wifi,



then after wifi set and done, reboot the router,

try to use your laptop wifi to connect router first login 192.168.1.1 in browser

then after wifi fully connected,

unplug the lan cable, and share your 3G modem connection via lan cable in laptop under network,

and plug the lan cable into the router blue lan cable port

then click updates list

and proceed to install packages

and follow by reboot after all packages install

and then login 192.168.1.1 again and set your wan 3G connection

then enjoy

actually found some problem, i stuck to add secondary ip. follow instruction by kizwan stuck in somehwere step 4.



i don see a add button to add your 192.168.1.10

Bro try connect your mobile broadband thru window now mobile partner. I did that and it works.

install comgt



install ◦kmod-usb2


try to install some package, got this error

---

Added on October 27, 2012, 4:41 pmfinally can update,

what problem i found

follow kidwan, to set secondary ip adress is on LAN not on 3G connection

while I found my OPKG-Configuration, i delete some code, may happen on some problem update the package.

thank guy, continue setting for openwrt

This post has been edited by danieltan: Oct 27 2012, 04:41 PM

well u dont have to set anything if u connect your wifi to router and share lan cable out to router blue lan port to updates list

anyway, glad u work it out,.

oh shet that is the error i did earlier too i forgot