how much you paid for it? if you still have the batteries and charger you can get the solo version for only RM180...btw, CT hardware own online website also have discount code to be use...( max 10% )
i guess they sell you the display unit? this is totally not acceptable...if i were you i will straight lodge a report or even call them straight and demand for a replacement....worst file in a tribunal case.

so far my purchase with CT Hardware doesn't had any issue before...

You need to check & compare price between CT hardware online or Laz/Gem/11st see which place has better discount lor.

Btw, went to CT HW shop and saw that Bosch 10.8v grinder. So cute... 
Then looking at the 18V grinder, wah... same size as wire version.

Hi

Anyone have experience and comparison for this Skil model?

This is the cheapest branded rotary hammer model.

I have experience with makita rotary hammer before, it very easy to make a hole trough my concrete beam.

Then bought bnd hammer drill that very difficult to make a wall plug holes on concrete wall.

with RM400 you already can get a much much better rotary drill.....Makita HR2470. Just top up a bit more to get this Makita which already proven with it's reliability and capability 

Agree.

Makita and bosch after discount from gem5 and lazada can get below rm500.

But i already have bnd for normal use and this rotary hammer might be use once in a year.

If it is worth the price, i might get the cheapest but reliable drill.

Recently just refresh some of my home power tools.....

Bosch L Boxx 238 ( paid RM 122 for this ) to store all my 10.8v range tool inside....

sometime will use this box as a mini portable 'work table'... this huge tool box can easily store atleast 4 x 10.8 powertools with the inlay tray which came with the individual tool..

Bosch GKS 10.8v Circular Saw ( paid RM315 for this )....very smooth finish cutting....and most important it's portable and lightweight...

usually will bring this along when buying plywood/mdf board at the hardware store and cut it into half before transport it back home...very very handy tool ! 

Bosch GST 10.8v Jigsaw ( paid RM 292 for this )

very handy tool for small wood project... replacement blade is cheap and has many type of blades too..

Bosch GSB 10.8v 2 LI Cordless Drill Set c/w 2 battery & charger ( paid RM264 for this set )

also part of the Bosch 10.8v family....quite powerful for this size, wall / tiles drilling no issue. Slow and steady drill...

Bosch 10.8 Charger & Battery ( paid RM 69 for each of this )

this is the fast charger and also this is the 2.0A battery compare to the 1.5A battery which came with the GSB 10.8v drill set

Bosch GSB 1300 Pro Set ( paid RM160 for this set )

good enough for normal drilling....of course this is nothing compare to rotary drill...I got this because the price is too cheap to pass....

Bosch GWS060 Grinder c/w some disks & handle ( paid RM108 for this )


and to use with the above grinder, I purchase this Grinder Stand ( paid for RM82 for this )


Bosch GLL1P Laser Levelling, GLM50 Rangefinder & GMS100M Metal Detector ( paid RM105 /RM330 /RM155 for it )

laser levelling is useful for wall frame installation, metal detector can be use to check the conceal pipe / wiring before drilling into the wall....very useful device. Rangefinder is my daily tool for site measurement...a very handy tool compare to conventional tape 

Recently just refresh some of my home power tools.....

Bosch L Boxx 238 ( paid RM 122 for this ) to store all my 10.8v range tool inside....

sometime will use this box as a mini portable 'work table'... this huge tool box can easily store atleast 4 x 10.8 powertools with the inlay tray which came with the individual tool..

Bosch GKS 10.8v Circular Saw ( paid RM315 for this )....very smooth finish cutting....and most important it's portable and lightweight...

usually will bring this along when buying plywood/mdf board at the hardware store and cut it into half before transport it back home...very very handy tool !  :thumbsup:

Bosch GST 10.8v Jigsaw ( paid RM 292 for this )

very handy tool for small wood project... replacement blade is cheap and has many type of blades too..

Bosch GSB 10.8v 2 LI Cordless Drill Set c/w 2 battery & charger ( paid RM264 for this set )

also part of the Bosch 10.8v family....quite powerful for this size, wall / tiles drilling no issue. Slow and steady drill...

Bosch 10.8 Charger & Battery ( paid RM 69 for each of this )

this is the fast charger and also this is the 2.0A battery compare to the 1.5A battery which came with the GSB 10.8v drill set

Bosch GSB 1300 Pro Set ( paid RM160 for this set )

good enough for normal drilling....of course this is nothing compare to rotary drill...I got this because the price is too cheap to pass....

Bosch GWS060 Grinder c/w some disks & handle ( paid RM108 for this )


and to use with the above grinder, I purchase this Grinder Stand ( paid for RM82 for this )


Bosch GLL1P Laser Levelling, GLM50 Rangefinder & GMS100M Metal Detector ( paid RM105 /RM330 /RM155 for it )

laser levelling is useful for wall frame installation, metal detector can be use to check the conceal pipe / wiring before drilling into the wall....very useful device. Rangefinder is my daily tool for site measurement...a very handy tool compare to conventional tape  :thumbsup:

Makita 3709 Router / Trimmer ( paid RM301 for this )

another must have tool for wood work....

a cheap DongCheng Sander.. ( paid RM70.50 for this )


for small hobby project, this is my dremel range....

Dremel 4000 set ( paid RM325 for this set )

this is to replace my old china version dremel multipro...

Dremel 220 Workstation/Drill Stand ( paid RM204 for this )

worth to get this if you have the dremel rotary tool...

Dremel MS20 Table Saw ( paid RM261 for this )


Dremel 4000 accesories...( can't remember how much already....atleast 40% discount off retail price, 2 item almost free of charge....just paid for shipping fee only  :thumbsup:  )


Dremel 2000 VersaTip Torch ( paid RM 106 for this )

very handy especially for detail soldering job...

and finally Dremel 940 Glue Gun ( paid RM79 for this )

one of the best hot glue gun i ever use.. the glue will never drip out or get messy when in us. Once charge up, it can be use cordless too !  :thumbsup:

Hi Sifus, please recommend between Makita HR2470 vs Bosch GBH2-24 DRE rotary hammer?

Wow a lot there.

You're tools collector?  Like brought recently.

Wahh Boss.. Can open shop ady..

All still look new jor..

Where do u get that grinder stand?

Very cheap

Wow thats a lot of 10.8v tools. Very good price too,  you bough all online?

Wow a lot there.

You're tools collector?  Like brought recently.

wow, bos where to get that GSB1300 at rm160?

i was looking for beginner tool (dual speed for small drilling job and screw-driving) any recommendation? try to get ikea fixa, but i think they discount the product already

If you need just for a small drilling and screw driving job, i would recommend you the bosch gsb 10.8 2 lithium set ( come wth 2 batteries and 1 charger ). with discount code from gemfive, you can get it now at around rm245. This little cordless is quite powerful for small drlling job and much better screw driving compare to those huge and heavy drill....

With the same batteries and charger, you could expand your 10.8v range in the future if there is a any need for other tools...

If you are going for bosch cordless range, go for 10.8v range for small job or 18v for more heavy duty job. Don't for those in between like 14.4v range cos there is not much range in this categories...

Hope this help..

did you mean gsb or gsr?  thanks

I believed he meant GSB..

GSR : No selection of hammer drill (for masonry)

GSB : Got 3 selection = screwdriver / Drill / Hammer drill

Correct me if im wrong sifu2 sekalian.