Any taught okatz brand rotary hammer?
LYN Power Tools Discussion, Bosch, Hitachi, Milwaukee, Metabo, Hilti
|
|
 May 12 2016, 07:09 PM
Return to original view | Post
#1
|
 
Senior Member
1,130 posts Joined: May 2006  
|
|
Quote|
|
|
|
|
May 27 2016, 02:34 PM
Return to original view | Post
#2
|
|
Senior Member
1,130 posts Joined: May 2006
|
Hi
Anyone have experience and comparison for this Skil model? This is the cheapest branded rotary hammer model. I have experience with makita rotary hammer before, it very easy to make a hole trough my concrete beam. Then bought bnd hammer drill that very difficult to make a wall plug holes on concrete wall.  |
|
|
May 27 2016, 03:20 PM
Return to original view | Post
#3
|
|
Senior Member
1,130 posts Joined: May 2006
|
QUOTE(old newspaper @ May 27 2016, 03:11 PM) with RM400 you already can get a much much better rotary drill.....Makita HR2470. Just top up a bit more to get this Makita which already proven with it's reliability and capability Agree.   Makita and bosch after discount from gem5 and lazada can get below rm500. But i already have bnd for normal use and this rotary hammer might be use once in a year. If it is worth the price, i might get the cheapest but reliable drill. |
|
|
May 27 2016, 04:06 PM
Return to original view | Post
#4
|
|
Senior Member
1,130 posts Joined: May 2006
|
QUOTE(old newspaper @ May 27 2016, 03:32 PM) Recently just refresh some of my home power tools..... Where do u get that grinder stand?  Bosch L Boxx 238 ( paid RM 122 for this ) to store all my 10.8v range tool inside....  sometime will use this box as a mini portable 'work table'... this huge tool box can easily store atleast 4 x 10.8 powertools with the inlay tray which came with the individual tool.. Bosch GKS 10.8v Circular Saw ( paid RM315 for this )....very smooth finish cutting....and most important it's portable and lightweight...  usually will bring this along when buying plywood/mdf board at the hardware store and cut it into half before transport it back home...very very handy tool ! :thumbsup: Bosch GST 10.8v Jigsaw ( paid RM 292 for this )  very handy tool for small wood project... replacement blade is cheap and has many type of blades too.. Bosch GSB 10.8v 2 LI Cordless Drill Set c/w 2 battery & charger ( paid RM264 for this set )  also part of the Bosch 10.8v family....quite powerful for this size, wall / tiles drilling no issue. Slow and steady drill... Bosch 10.8 Charger & Battery ( paid RM 69 for each of this )  this is the fast charger and also this is the 2.0A battery compare to the 1.5A battery which came with the GSB 10.8v drill set Bosch GSB 1300 Pro Set ( paid RM160 for this set )  good enough for normal drilling....of course this is nothing compare to rotary drill...I got this because the price is too cheap to pass.... Bosch GWS060 Grinder c/w some disks & handle ( paid RM108 for this )  and to use with the above grinder, I purchase this Grinder Stand ( paid for RM82 for this )  Bosch GLL1P Laser Levelling, GLM50 Rangefinder & GMS100M Metal Detector ( paid RM105 /RM330 /RM155 for it )  laser levelling is useful for wall frame installation, metal detector can be use to check the conceal pipe / wiring before drilling into the wall....very useful device. Rangefinder is my daily tool for site measurement...a very handy tool compare to conventional tape :thumbsup: Very cheap |
|
Topic ClosedOptions
|
| Change to: |  0.0689sec
 0.43
 7 queries
 GZIP Disabled
Time is now: 9th December 2025 - 04:42 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.