Noted. I shall call time then since I am sure I have already enabled fast track.

Did you check network cable? Use at least cat 5e.

All my cables are cat 6 cables.

Yeah..

seems like after enable fasttrack can reach 250mbps

hmm upgrade router or downgrade line to 100mbps..

choices choices choices

Can we configure hypptv setting without using bridge? Anyone have try it? On my ccr1009 currently configured using bridge..

I have the same router. Got 300Mbps DL and 200Mbps UL on a Turbo 800 with fasttrack enabled.
Although I didn't restart my btu just yet.

Not really possible on your CCR1009-7G-1C-1S+PC since all the interfaces are directly wired into the CPU without a switch chip :



The older CCR1009-8G-1S-1S+'s with the Atheros switch chip should be able to do it. You don't really need it for HyppTV anyway, you're got more than enough CPU power on the CCR1009 to handle the load from the CPU bridging. Most people only use the Mikrotik switch chip VLAN tagging/untagging on the lower end models to perform VLAN switching without bogging down the slower CPU.

Dunno if this counts. On my RB2011 which receives the vlan trunk from my RB750Gr3, the incoming trunk and outgoing untagged ports are configured using /switch only.

Thank you rizvanrp.

hello, how to setup unifi with Hypptv using mikrotik hAP lite v6.43.1 (without master port option).




Attached thumbnail(s)

Anyone knows when will RB4011iGS+5HacQ2HnD-IN be available for purchase. Checked the spec and it looks really good.

https://mikrotik.com/product/rb4011igs_5hac...-specifications

Hello guys.

I am looking for a router to replace an aging Draytek Vigor 2130n in the near future.

For Unifi 800Mbps

Is the Mikrotik RB750Gr3 good enough to handle anywhere between 30 - 50 clients? Mostly laptops and smartphones
It will be connected to 2 or 3 dumb switches and around 8 cheap APs... low end tplink, asus, dlink, some dual band some not xD

The only restriction that I'm gonna implement is 'Session Limit' (for all ip range). BTW how many sessions can the RB750Gr3 handle? The Vigor 2130n can handle around 15000 IINM..
Not looking to maximize the speed for everyone; max speed is only for the PC connected directly to the router just to do a speedtest

As long as the router doesn't freeze due to torrent or something similar (that requires a power cycle to fix) it's good enough.


If you're wondering.. it's for a student accommodation.

RB1100AHX4 should be suffificent

I just checked the specs and price.. isn't it a bit on the overkill side?
The Mikrotik RB750Gr3 is really not up for it eh?

You can try later sell cheap ok for rb1100ahx4 upgrade

Guys, what is the easiest way to copy settings from RB750GL to RB750Gr3?

Export the configuration to file then import into new router.

Tried that following the guide available on the net, kept saying file has command error.
End up copying all the settings manually.

Although, I'm calling for help. Can anyone who is using Gr3 with 800Mbps and able to get full speed help me?
I'm already out of my wit.

hap aC2

Good for UniFi 300 ,500 and 800 Mbps






Attached thumbnail(s)