Yalor... I just notice Alzazeno was here....

wow, u kinda .. spotted king also

no lar...

and so happen I spotted an MAOC member beating trafic light an hour ago, caught on camera...

den ur camera will out of memory if u see me only...lol...

---

Added on October 20, 2011, 12:26 ambefore service 20,000km 8.2 L/100km
after service 20,000km 8.7 L/100km
city drive only....
pls share ur average mileage....

This post has been edited by jackielee: Oct 20 2011, 12:27 AM

If I go on long distance within the city like KL-Klang using highway, I can get 8.2
If I go on long distance within peninsular like KL-Kuantan, I can get 7.6
Mostly city drive where there is a lot of cars and traffic lights, I get only 8.8

I don't think that AVG accurate ... my range from (7.7 to 9.1)

So I only count by amount of Fuel I pump full. Then divide by KM I used.

Latest 2 time get
1. RM0.14/KM (4 adult 2 kids, OTW back + 1 more adult) ( 80% highway, with VS + GC )

2. RM0.142 /KM (3 adult ) (80% highway, GC without VS )

Just for reference, I believe that road condition, Tyre pressure, weather all should count into it but ...susah lah .

This post has been edited by tyenfei: Oct 20 2011, 08:16 AM

My Feet Very Heavy....So Average cacat 1...Cannot rely...

Came across some useful info
http://www.kouki.co.uk/utilities/visual-tyre-size-calculator

---

Added on October 20, 2011, 7:17 pmXM2 or CC5?
I want quiet and durable. They last more than 20k each?

---

Added on October 20, 2011, 7:46 pmStatic loaded radius, outer diameter and rolling circumference

These three measurements are all important to consider when talking about wheels and tyres. They're all interlinked. Straight from the manufacturer, a tyre is circular and it's outer diameter (OD) is based on this unladen, perfectly circular condition. Because tyres deform under load (flatter on the bottom than they are on the top when taking the weight of a car), the vertical radius of a tyre under load is not half the diameter. It's typically about 44% of it (from the centre of the wheel to the road). In addition, a tyre doesn't roll like a solid wheel; the steel or fabric belt 'rolls along the ground' like a caterpillar tank tread does. Because of this, the rolling circumference of the tyre isn't quite what you'd expect. The closest approximation for this value can be calculated by taking the outer diameter, subtracting twice the tread depth and multiplying by PI. Roughly speaking, that's 0.96 x OD x PI.

Now why is this magical value so important? If the rolling circumference changes because you've mismatched your new wheels and tyres, then your speedo will lose accuracy and the fuel consumption might go up. The latter reason is because the manufacturer built the engine/gearbox combo for a specific rolling circumference. Mess with this and the whole thing could start to fall down around you.

Read more: http://www.carbibles.com/tyre_bible_pg4.html#ixzz1bK0Lyyc6

---

Added on October 21, 2011, 2:28 pmWell, changed to Xm2 already. And the shop immediately show me alignment got problem. Need to adjust chamber screws.

This post has been edited by n8210: Oct 21 2011, 02:28 PM

@n8210,

so all together spend how much??

I've always get the impression that Alza have serious alignment problems... Does that mean chamber screws are a must...?

Altogether is RM225 x 4 donuts lor. I didn't do the chamber screw. I recall another forummer say no need, no such thing. Anyone can confirm?

---

Added on October 21, 2011, 7:33 pm***DO NOT LET THOSE GUY TO ADD CHAMBER SCREW TO IT, NO SUCH THING THAT CHAMBER RUN CAUSE JAPANESE ENGINEER NEVER USE IT AT THE WHEEL!!!***

Post #223

This post has been edited by n8210: Oct 21 2011, 07:33 PM

not few la, quite a lot mah...

---

Added on October 21, 2011, 9:45 pm

best mileage for me is RM 0.12X from KL to Taiping, average speed is 110-120km/j

---

Added on October 21, 2011, 9:51 pmthat day when i 1st sent for 1000km service i complaint to them the alignment is no good, always keep left...then they sent for alignment, after i took the car, i drive on LDP,terus u-turn go back and complaint, then they check again, now they tighten the lower arm and redo the alignment....baru ok....

This post has been edited by gjtan: Oct 21 2011, 09:51 PM

My Average Mileage...

---

Added on October 21, 2011, 10:19 pmEithanius...

How's your car?


This post has been edited by angelbratz: Oct 21 2011, 10:19 PM

how u did that?? start engine and sing karaoke inside Alza for whole day???

This is mine...



No news... only one week... I expected 5 weeks, but I got a trip in 2...

I'm getting the hang out of the Perodua-loaned MyVi... damn kao pickup...

My Alza is a bloody slouch...

A bit cacat liao i think my average...compared to my normal driving...i get around 9.2 ltr / 100km...dunno how i get this...but was in a shock...but my feet also heavy...haha...iridium and K&N does give abit of a difference...

What app u use that liao?

wat! wat d heck they did at the service centre? day dreaming?! u kena taruk em kaw-kaw ya. bazir masa n duit untuk kerja 2x.
where is the service ctr?

i have tat prob apart from the other probs in my "list". I gona tell em to fix d shits when i go 4d 3rd final free service.

9.2L/100km is a bit on the high side. Auto Transmission?

hows the tyre? xm2 is in my list too

n8210.... XM2 update update....


RoadTrip...