i think he go for long holiday jor

check front page u can read this :


"-BRB when free -


This post has been edited by wtm0325: Sep 17 2011, 12:12 AM"

angelbratz, what's your car plate number? We need to refer to 4D for further "directions" from above.

who summons me?

will update the front page later regarding aircon kick in issues and the solution - Voltage Stabilizer

Other problems like steering vibrate on cornering/uneven road, you'll have to live with it. I read Alza forum long time ago the problem still persist even after change new steering rack at SC/ changing to quiet tyres. If you found a solution, remember to share with us

Dashboard rattling, just DIY and put some sponge in between those gap.. SC won't care 1 lar...



This post has been edited by wtm0325: Oct 18 2011, 08:38 AM

Now that is sad for a 60 over grand car... Perodua should be bombarded with lawsuits out of this...

At least Proton is offering lifetime warranty with their power window issues, what the hell is Perodua doing...?

This post has been edited by Eithanius: Oct 18 2011, 09:46 AM

That's why the price is not right for the car.

Here is my silverstone m5... anyone interested to buy for a very cheap price?
Everyone get a spare and keep. Don't use the cacat original spare tyre. That's not a real tyre, it is a bicycle tyre.

Interesting but, is it possible to fit one into the spare tyre compartment...?

simple adjustment, can fit.

then, get another "bicycle tyre" from another alza owner, buy a second hand bmx body, put them together you have one bada$$ bike.

Probably need a new rim for the spare M5 coz all 4 rims will be taken up by the new tyres...

regarding the aircon kick in issues, it shd be good VS + GC , or even Voltage capacitor.

I'll try to get confirm from few MAOC members regarding their Alza aircon kick in condition

---

Added on October 18, 2011, 11:09 amI'm not sure which proton model u refer to ..

But my P.Iswara (2005 version is actually saga also, all are SAGA ) .. power windows switch problem after 2 years used. Both side, the strange thing is .. passenger side hardly use

Change to so call "Original genuine" proton switch .. work for 3 months only. And same thing I never use passenger side it still gone after the driver side.. just work for extra 1 more week. 2 times i change.

Then finally I got my uncle to get RM15 so call "China Make" power windows switch .. it work until now .. for 3.5 years

haiz .. what to do? M memang boleh mah

This post has been edited by tyenfei: Oct 18 2011, 11:09 AM

Well at least Proton's making an effort to fix the bad perception, though it's nothing of a safety concern, trivial isn't it...? Unfortunately, here with the Alza, we're probably dealing with some safety issues, and yet Perodua did not bother to rectify the issue, not even a recall...

It doesn't matter whether it's years of bad perception or months of complaints, Perodua should own up to it's customers...

I dont know bout u but i will push them until they dont want to see my car anymore...so better fix the prob or ill make you change your handphone number...

The thing is the Dashboard rattling problem IF everyone have it then i can accept but they should do something bout it...U know what i found out? they use Nescafe/Milo Can as a Washer/Gap closer. How i know? Coz they accidentally put the thing in my car when i test drive with them. The technician str8 away take and put inside his pocket. I ask him what is that? He said owh...we open up the center panel and found out the previous technician use this to close & tighten gap between the screws.

Why i rage is because i test their test drive unit...and test my car...Big Difference... The Steering vibrate while cornering on rough/uneven road is not there...No rattling inside the dashboard...

If SC wont care...then i care... i will push them to the limits...Pay 60K+ with this kind of issue is just damn bull if they say tak apa...If second hand then understandable...but new car with this issue is not acceptable...This is my 2 cents...

This post has been edited by angelbratz: Oct 18 2011, 04:16 PM

angelbratz, we are counting on you

If you are at all serious about going to court, then you will need to document everything. Everything single thing. Write down the date, time, names, what happened, etc... a very detailed document. This is usually your best weapon as a tiny fry citizen.

Where is our consumer right.. = ="

Hopefully no need go that far and get my issue fixed...thats the most important thing...


Yup...I documented every single invoice receipt since the 1st visit @ Roda Kayangan


Awaiting feedback from tribunal....Dint do a report but asking advice from them on how to proceed.

---

Added on October 18, 2011, 4:58 pmCurrently figuring out how the hell to open the Front Driver Cabin room Lights Cover...Anyone open it before?


This post has been edited by angelbratz: Oct 18 2011, 04:58 PM

When we are no longer chinese, malays, indians, and others, then we will start to have rights. You can easily talk to a lawyer, and ask for his advice first. Some junior lawyers wants to show "co li" then they brag a lot. First visit no need to pay one until you decided to use their service. They won't teach you what to do, how to do, cause it is their job and often they don't know how also... but they will surely give you some ideas. The meeting won't be too long, they have jobs to do too, unless they are jobless. Then they will spend the whole afternoon with you.

FIGHT, this is a country where we have to fight for our rights. The ppl who worked for us don't care about us, otherwise we won't have this issue in the first place. Imagine if Alza is only RM25,000... will we still be discussing all this?

25K...Hmmm...Depends on what kind of issue i guess...

Whats a "co li" ?

Front Driver Cabin room Lights Cover? The 2 light in front right?

Use a testpen, let choose the right side .. insert the testpen in between 2 covers but touching the right side.

then use a little bit of force like open milo can.

hope u can imaging ... ><.

Insert in Middle or?

[o][o]<---Here

or insert in between those 2 light ?

Left --->[o]Here[o] <---Right

the last one.

when I change the bulb need pull out. not screw type.

This post has been edited by tyenfei: Oct 18 2011, 05:39 PM