Sold hahhaa

This post has been edited by IceCube: Aug 10 2014, 03:36 PM

Volvo XC60 new car!!



Toyota Estima Aeras 2.4.



BMW E60 520i .



Volkswagen Golf GTi .


Honda Civic FD2 2.0 .




Ford Fiesta .



This post has been edited by IceCube: Jan 15 2012, 02:49 PM

Peugeot 308T .




Peugeot 3008T .



Perodua Myvi 1.5L new.



Proton Inspira .




Proton Satria NEO .



Toyota Vios .



Mitsubishi Lancer GT 2.0 .



This post has been edited by IceCube: Jan 15 2012, 02:49 PM

Viva.



Altis.



Saga BLM.






This post has been edited by IceCube: Oct 17 2011, 10:58 AM

price for doing old satria is oso rm199?
where is ur location?

Please check the lastest update above for pricing. TQ!

Office Address: B-1-15, Block B, Lift B5, Jalan 3/144, Megan Pheonix (Behind Pheonix Plaza).
GPS : Longtitude 101.743999 , Latitude 3.078576.

Kevin
016-6960886

This post has been edited by IceCube: Oct 23 2011, 01:30 PM

d price is very interestin... but wanna noe more ab material specs. i.e. fire resistant, tensile/ compression strength / watever data u got.

how much for persona elegance?is it can reduce the roadnoise??pm me the details..tq

Any improvements so far on your kenari?
Need some data and feedbacks before injecting something permanent into the car bro.

Does this involves drilling holes into the chasis?

Bro, quite interested, but due to many negative feedback about inferior products I need to find out whether is it same as pro foam and auto foam? If quality is 90% I will do it...will let u know my car details via pm. Looking forward to more details from you

Thanks but I tested the material which is rated B3 for fire resistant and can withstand up to 194F of heat when fully cured. Tensile/compression/strength i dont have tech data but i can tell you its hard as a rock when fully cure and you can come to my office to check out the sample we spray out to test for strength. Its not those easily crack biscuit foam.

UGPM! It reduce the hollowness of the chassis noise. You will feel the car is tighter and more solid.

I felt the car handle better, going over bump seem more balance as the center is pull the front and rear together thus it feels like more balance like my other toyota car. Previously (due to my hard adjustable absorber) going over bump is really rough and its like gonna torn the chassis apart but after the foaming, its more solid and quiet . Doesn't feel so hollow anymore. I gonna do my A pillar and B pillar later and i think it should be like a track car now. Just love the tightness and respond.

Bro,
I know regarding the inferior product. Actually, its all marketing. I don't want to reveal here due to sensitive issue but you can drop by I can explain to you personally and you can feel the foam (our sample) and get to look at the foam with your own eyes and hand to squeeze it, hit it, bang it , step on it, lick it or even bite it.... You'll know its more then 90% .

This post has been edited by IceCube: Aug 23 2011, 10:05 AM

cheap alternative to those super expensive Autofoam

hey bro, sry for the late reply. so far not much improvement noticed yet. only 1 significant improvement noticed is definitely lesser wind noise when driving on highway.

perhaps wait till it fully cure then i observe for more improvements. will drive on yellow lines tomorrow to test

This post has been edited by noblesse: Aug 24 2011, 11:21 PM

interesting price but too far from my place. I am fr penang. btw, undercarriage mean which part? is it same as autofoam where for main chasis will b foamed? or like profoam just do 2 only?

Hi, bro,
can this stuff be postage and can its be done by anybody? , can create a simple drawing Undercarriage side with rear for proton iswara aerob 1.3 LMST? if i buy from you.

Yes bro. Just alternative for consumer to choose from.

Hi bro,
Thanks for the review, yes it reduce wind noise which caused by turbulence wind thru the hollow chassis hole. Did you feel any different today?

We foam it to the undercarriage which mean the main chassis structure "bone". We do left, right and rear. Is it 2 or 3 part? You guys can add on more location too like front and A pillar as most road noise is coming thru the A pillar. Just top up the different.

Sorry cant DIY.

This post has been edited by IceCube: Oct 23 2011, 01:31 PM

any northern region agent?

Currently only in Cheras, KL.

how much for waja?

if want to do for front bumper how much?

We only the do chassis , we cannot foam the front bumper bro...

This post has been edited by IceCube: Oct 23 2011, 01:32 PM

If doing complete for whole Honda Civic
How much ?

interested to foam my undercarriage..my main purpose to reduce my NVH on my ford focus...how much it bro?

this promotion until what date? I only can manage to do it after raya..

Hopefully u can come out package like autofoam so we can plan do it stage by stage... just sugestion...

bro, after 24 hrs d, still feel pretty much the same. maybe coz my adjustable is already very stiff. overall the whole chassis feels slightly firmer when cornering.

but the foam still leaking out bro until today.. and its not harden yet. still very soft with holes in the foam. i can even poke the foam with my bare fingers in the chassis hole there.. slightly harden but still can be torn and poke like normal sponge how come?

This post has been edited by noblesse: Aug 25 2011, 09:30 PM

Do we need to come back after a week for cleanup like one of your competitor product?

For undercarriage is RM300. For whole car, we don't recommend to do it as its too stiff for daily driving, unless its a track car then okie.

If main focus is to reduce NVH, then the RM250 package suit your criteria . Promotion while stock last. Most after raya since many have booked to do it after the holiday.

As for package, we are working on it. Probably the best NVH reduction would be the undercarriage. Other location would probably not suitable for daily driven cars.

Yes, the chassis will feels firmer and absorb the harshness. The foam would be fully cured by 8 hours usually. And those oozing out from the hole would mix up with air thus its soft. The other part that is inside the structure would be mix with the fluid and expand out the air in them and harden (hardder then those exposed to air outside) .

And yes, that why we can cut and trim and spray paint (just to cover it up) when its coming out from the hole and it can be torn and cut like normal sponge . But its different when its inside the chassis , if its like a normal sponge, then you wouldn't feel the car got firmer .


Actually you don't have to. We will cut and trim for you after 30mins - 50mins and touch up on the same day.

This post has been edited by IceCube: Oct 23 2011, 01:33 PM

approximately how long for the foaming job?

i am interested to do before i go back to my home town for raya.

Approx 1.5 hours to 2 hours for the complete job done. Do pm/sms to confirm the time and date as for now, i am quite fully booked , sat and sunday also fully booked, monday is free (prefer 10am to 3pm ).

This post has been edited by IceCube: Oct 23 2011, 01:33 PM

monday i already at perak.
nevermind, i will contact you after the raya holidays la.

Looking forward on this also.Thanks Wei on the details provided.

Hi,

Can install for WAJA also ka ?

Alright bro, enjoy your holiday~ See you next week.

Okie bro, see you on sunday.

Yes, can for waja also.

update for bro kevin, after 3 days, car felts stiffer and handles better

i found out that it takes about 1 week to fully cure and to see full potential of the foam. nice stuff, recommended for budget upgrades

free bump for u bro! nxt time i gatal, look for u do foam on my pillars

can do on doors ah?

This post has been edited by noblesse: Aug 27 2011, 10:49 AM

Thanks for the feedback bro!

Can do the pillars but i recommend the A pillar only. If do the whole car would be too stiff bro. And can do on door sill but not on the door.

---

Added on August 27, 2011, 1:46 pmThanks for the feedback bro!

Can do the pillars but i recommend the A pillar only. If do the whole car would be too stiff bro. And can do on door sill but not on the door.

This post has been edited by IceCube: Aug 27 2011, 01:46 PM

how much would it be for perdana and inspira?

It would be RM300 (promo) for perdana and inspira.

This post has been edited by IceCube: Oct 23 2011, 01:34 PM

Hi Bro, I want to buy the foam from u only. I am staying in Penang. It is hard for me to come down to KL. PM me the price and total usage for a Kenari. I want to do my Kenari's undercarriage and also the side pillar.

Any branch in JB?

haha a pillars only? any feedback from your kenari so far bro? a pillars only got any diff ah?
can quote me price for a pillars, thanks!

how come u advertised as RM199 for p1 and p2 cars? pls pm me ur location, as that i can refer to my bro who will be the one to send the car for foaming

Hi, I'm the altis owner, so far 2 days already, nothing much different in term of handling, noise reduction, will observe and see how

Hi bro~

Well, NVH on Altis level is very acceptable already. So doing the foaming, it will improve slightly let say maybe 20% on the noise reduction (another 80% is by stock altis NVH setup) and 20% on handling.

And there could be some uncure foam still, the viva owner said it took a week to cure the foam, maybe its the same for you? But mine fully cure in 2 days.

You can try going faster thru bump and pothole to try it out or during "U" turn you actually can feel the car flex lesser .

But overall, its a peace of mind that the undercarriage structure no longer creating noise turbulence and are stiffer then stock Altis.

Let me know if anything . Thanks bro~

Kevin
016-6960886

---

Added on August 28, 2011, 10:44 amHi bro,

Which side pillar do you mean? All pillar ? or the front A pillar?


Sorry, currently only based in KL. Looking for reseller too if you have workshop .

Yes, A pillar only inorder to maintain the comfort level in the cabin. For A pillar only, you feel the noise reduction due to the wind noise coming from there and also handling improved due to stiffer pillar.
But after doing A pillar, you will feel the rear and middle is flexing and the front is not. Then you will want to do the B pillar and C pillar. It would not be a good idea if you ask me, unless you really love a stiff-track-car feel , then do up all the pillar.
I start to like the track-car-feel now after getting used to the stiff-fully-done-chassis on my kenari, its just that i cant drive fast if i want comfort level of NVH (when with my family), and when i am alone i can just whack the car and still get performance like an invisible roll cage feel.

For the A pillar it would be RM100 for Viva.

RM199 is promotion raya price. Its our launching price since we just starting to sell it. So aeroback and smaller cars like viva,kenari kelisa would not use alot of foam and workload also lesser thus the cheaper pricing.
Other sedan cars have dual bone structure thus more foam and work involved so the price is slightly higher.

My location is at Megan Phoenix, (Behind Phoenix plaza), if you are using Papago GPS, just search for Phoenix Plaza @ POI [point of interest] . I will do a map up later to show you guys how to get to my office, i know its quite hard if without GPS but once you know, its just at the highway shoulder only.


This post has been edited by IceCube: Aug 28 2011, 10:44 AM

sure icecube, no problem, will keep an eye and post my review soon on ur product ya!!!
anyway, for those who are interested, just go for it, ice cube is a very experience and knowledgeble guy in this field

I mean both left and right side sills and under Undercarriage for my kenari.

Thanks bro~ Looking forward for your review on Altis.

Oh you mean the door sill and undercarriage ? PM you the price. thanks!

Price for satria neo include installation

I'm the Saga BLM owner who did the chassis foaming on Saturday morning.

First impression on the way home, nth much as expected becos the foam hasnt cure yet. but noticed a slightly quieter cabin.

After arrived home, took a detailed look underneath the car n noticed some foam has oozed out at one point n had dried partially (which wasnt noticed during the foaming process).

Trimmed the extra foam myself n noticed one of the hollow transverse section above fuel tank wasn't foamed. not entirely satisfied, i contacted Kevin n he agreed to foam it with no extra cost. (thanks Kevin)

So a long drive back to Cheras again (with all the jams) to get it done on the same afternoon. this time, going over road imperfections seems better!

Sunday, didnt drive my car so no review.

Monday morning (today), on the way to work, noticed much better ride when going over road imperfections! feels much more solid n 'continental'. NVH has been reduced and it's definitely noticable!

All in all, very good value for money. Kevin is passionate and hardworking and his customer service is very very good. Kudos and all the best!

Will give review again if more improvements can be felt after total curing of the foam.

IceCube, can you tell me how long will you take to "install" into a MYVI with your under and rear package? need to make sometime, by appointment isit?

Yes, need do pm the time and date to confirm first as for now, i am full and available slot is thursday 11am onward.

It would take approx 2 hours to be done.

4 days after foaming my altis

impression-
handling indeed better, can feel chasis a little bit firmer, more confident in cornering
but soundproofing wise, not much differrent

icecube-im just worry the foam is not firmly packed in the hole, as i notice there are quite a lot of foam leaking out from a particular hole when ur technician inject the foam

can help me check check?? hehe

Hi bro,

The foam concealed the chassis and excess will flow out and push thru the tape. We actually put more then needed and let it fully expand inside the chassis, that why you will see alot of foam coming out at the tape area as they expand and fill up the space, if not filled up you will not see the foam flow out . Hope you understand what i am trying to explain here.


if not mistaken, my technician inform me that your chassis have air hole plug on the chassis but few of them probably bounce off the hole. My guess are that your chassis does not cause the wind noise turbulence since its covered up (meaning Altis sound proofing is quite good already) but after stiffing it with foam, your handling improved.

Thanks bro! cant do it without your support! Enjoy your ride bro.

check with bro, he seems like not really familiar with ur office
would you mind to share the way and cost of doing it by myself to inspira?

hello, was wondering what is the period for this promotion?

thx icecube or ur explanation
actually i don really expect noise reduction in my car, as i think the NVH is kinda good already
the main reason i foam my chasis is because of handling, it really does improve my handling...

1 more question-the excess foam that u let me bring back home doesnt really harden up, y ah?? the foam i keep is the one which drop from the hole

We can met up someplace else like Leisure mall petronas or Caltex/Esso which is on the highway shoulder itself. or futher down at tesco cheras?
DIY would be quite troublesome and need some skill to get the foam as stiff as possible. We'll show you how its done at our office.
While stock last bro. Maybe til end of sept 2011 .

The excess foam does not hardden up as much as those in the chassis as its expose to air. You can see the foam which have air particle in the foam itself and some are smooth without air particle. In your closed chassis structure, it mix with fluid and expand tightly in the chassis and chemical reaction happen and the color of the foam actually turn to dark yellowish and really harden up. Not like those over flowing foam which is softer and very light in color. I think one of the bro here seen the dark yellowish foam and he said its really hard as rock but still lightweight.

Put it short, if the foam is not hard enough ... you will not feel a different! So, its not like some Abro foam that someone been pionner in this industry is spreading about. Its chassis foaming at fraction of the price. We operate on small scale doing two to 3 cars a day slowly and overhead is low thus we sell in a lower affordable price passing the saving to you , the consumer.

Any negative critics are welcome , so we can improve further and correct our mistake. Cheers and happy holiday, selamat hari raya!

This post has been edited by IceCube: Aug 29 2011, 09:27 PM

Bro i have done the under carriage >> can do for A pillar aswell? pm me price

I've seen the yellowish-brownish hardened foam (excess from my chassis). Trust me, it's really hard.

Even the light colored one when fully cured is pretty hard! (those that i trimmed off myself at home) I'm keeping it as a souvenir. haha.

Kevin, it's so good value for money that now i'm thinking of foaming my wife's Savvy too!! can give me some special price?? (since d car is abit smaller than my BLM) =)

Looking fwd again!

bro, your promotion until when? very interested, but i will only get my car on end sept or early oct. is it still possible to get promo price

We don't do the A pillar yet for now, but if you are eager, you can drop by and we can see what we can do from there.

Hi bro~
Yup, keep it as souvenir. Oh ya, regarding the pricing, for Savy would be RM300 and Saga BLM is RM300. Lucky for you as you are the first BLM so got the special price. Please check first page for the updated price.
Let me know when you are able to come over for the Savy, earliest would be Thursday morning 11am.
If confirm, let me know.

For new car, we recommend you drive it for a few weeks before foaming it as to get the actual feel of the car first. Else, you might not know what improvement have been done after foaming it.
The promotion while stock last but we will try to extent the promotion period due to this raya holiday and many are already "balik kampung" for the whole week.

This post has been edited by IceCube: Oct 23 2011, 01:36 PM

Foamed my 308 Turbo yesterday and it was definitely money well spent.

I wanted to do a competing foam initially but at nearly RM1k it was kinda pricey. Besides, the stock sound proofing and handling was already very good so I'm not too sure if I'll feel any significant difference if I foam my car.

Within a few hours of foaming my car I can already feel the difference. The handling feels sharper especially when doing u-turns and going round a roundabout. When going over road humps, the car feels more solid with less flexing. I actually enjoy going over humps now hehe...

I won't be driving the car again for the next 1-2 days and with more curing time, I hope there will be further improvements

wow. It seems like some sort of good stuff
even the staff gave thumbs up.
Hmm, will wait for more reviews

Thanks for the review bro arj! . Enjoy it~
Promo price is while stock last, later when price increase please don't bombard me with this promo price ya~ Early bird always get the fresh worms.

any chance bring ur crew down to northern? ehhe.

Yes, there are chances we can bring the whole crew down north or south probably but not that soon.
I know quite alot of Johor , Perak , Penang area are interested to get foamed . Let see how the respond here in KL first and if good, we'll proceed to go nationwide tour.

bro pm me price for foaming A pillar...=)

hello,did the foaming today,now am waiting for the whole thing to be properly finished and will give my review

Sorry , better just do the undercarriage only to avoid increase in NVH.

Thanks bro. Let us know your review on your Saga BLM later.

This post has been edited by IceCube: Aug 31 2011, 06:57 PM

yeah let it cure for a day already and i can say that the noise from the road has lessen, and handling feels better while the car feels more solid but like some other says,to the material to be fully cured will take more time so will include if there is more difference..

Good to know it helps reducing road noise for a BLM and improve handling too~

kevin,c u on 18 sep..hope can reduce my persona road noise

This post has been edited by samwongjyhhorng: Sep 1 2011, 12:19 PM

For your case, I need 6 hours (or more) to get it done , bro~

So, my 18th sept is fully booked for you only. See you then bro. No regret~

Time to give my honest review, day 6 post foaming altis 2008
Handling good
Go through bump more confidently

More stable when go through road imperfection
Noise reduction nil-perhaps altis NVH is kinda good already
Definitely money well spent!!!
Thx icecube for bringing in this wonderful product

will it bumpy??

very happening now!!!
thanks for the advice and willingness to come out for appointment. let me check with him whether he is ok, and come back to you later

by the way, foaming the A pillar is RM100? and for the under carriage, do u have to disambly any interior part of the car? how long is the process? 1.5 hour or the 6 hours for the persona u quoted is different story/

tq

Thanks bro for the review~

Not bumpy actually. It reduce the bumpiness . More 'continental feel'

Its 1.5 hours to 2 hours usually for one car. For the 6 hours, its for Sam ,coz he want to do 3 cars altogether.

Alright done foaming on my little kelisa...

can feel the difference already when driving back home, especially the feeling in the car... i will give review few more day after to wait all the foam dried out.

I'm happy with the workmanship...

bump for good price!! all d best bro

got reduce the roadnoise?

---

Added on September 1, 2011, 8:35 pmok..then i dun need wori ady..

This post has been edited by samwongjyhhorng: Sep 1 2011, 08:35 PM

bro ice, ur place around plaza phoenix? finding google map. lol

bro, is a pillar advicable to foam for comfort?? coz i saw klauto foam a pillar for soundproffing package
please advise

hi icecube,

im quite interested on ur product here to apply in my vehicle, seems like it is a good product. anyway can u do some test so that to gain more confidence from ur future customer? just like what autofoam did, inject the foam into water bottle and let it cure up first, then mix with water to see whether the water will trap inside the foam. one thing im worry is this kind of foam is going to be permanent in our vehicle, if water can trap inside the foam, then our chassis gonna become rusty becuz water will splash into our undercarriage chassis when driving on wet or raining condition road. any fire prevention? i got heard of some foam easily caught fire im not sure about this. when i visit autofoam the boss did explained well to me bout this product but i don hav budget to go for it.

lastly i hope this is a well worth investment in my vehicle.

thanks and thumbs up for u.

any comment bro icecube?

Hello bro! I want to foam up my forte promo still available? PM me the details pls when r u free?

---

Added on September 2, 2011, 12:11 amThanks bro Kevin For replying my sms so quick! can't wait to foam my car

This post has been edited by seanoys: Sep 2 2011, 12:11 AM

This is my 2nd review for my 2nd car 'trans-foamed' by Kevin n his 'sifu' Josh. (2 of my cars foamed in less than 1 week, need i say more?)

This time it's my wife's Savvy. (btw Kevin, Savvy is spelled with 2 V-s). haha.

After foaming d Savvy yesterday, immediately noticed much less NVH on d way back! much more noticeable than my BLM on d 1st day!

In d evening, wifey, who knows nuts abt cars, drove it n when she's back, said excitedly: "hubby, my car feels different! it feels 'heavier'!!"

I smiled at her n explained: "The foam just weighs 1 or 2kg at most. It's d superior effect tat makes it feel this way, d more solid feel."

She agrees instantly and I know it's money well spent, AGAIN. =)

Thanks, Kevin, 'ka ki lang'!

how much to do for inspira , pls pm me ur address and availability thanks

Bro, your altis sound proofing is quite good already if only foaming the A pillar does not really do you much since your toyota is very solid and lots of hole are covered up with stopper to avoid wind noise unlike some other cars. So, for your case, no need to foam the A pillar unless you want to improve handling and dont mind the slight tightness/stiffness of the car.

Its well worth your money. Dont worry. After so much reviews and test in my office on the demo foam you will soon understand why/how/where/who/what ...

Regarding foam soaking up water, its water proof foam so it does not absorb water. no worries. But we will show you in our showroom there when you come over.

And fire prevention ? Do you know that the fuel tank does not have fire prevention and so does your cushion and all other plastic material in your car is not fire proof? The foam injected into the METAL chassis, thus the metal is sort of protecting the foam from outside world of fire/water/dirt/uv and so on. Basicly, its safer then carrying 40liters of flammable fluid in your fuel tank.

I'll show you a fire test in my showroom if you really want to be sure that when you car caught fire is not become it came from the foaming. Just ask me for a demo when you come by.

Yes, plenty ..hehe

Ah, yes, I cant online most of the time coz have to work but sms i will try to reply ASAP if possible.
See you bro.
Hi bro~
You really sensitive can feel the different from Saga and Savvy (oh, double V eh?) .
Great to know your wife love it too. More conti feel huh..
Enjoy it bro~ Let me know if you want to come over to trims those left over or you can DIY also no problem.
Take care~!

hi, how much to foam front and rear pillar for waja?

aiyo, brother

i was referring to my previous post to check the price of foam pillar A

UGPM! Have you done the undercarriage ?

Oh, price would be RM150 for the A pillar.

This post has been edited by IceCube: Sep 3 2011, 01:08 PM

I already DIY last nite, so no worries.

thanks bro, tentatively, pls mark the calender for me on 13 th Sept
for under carriage and A pillar

---

Added on September 2, 2011, 6:21 pmi have put the links at myforteclub(FB), proton inspira mivec club(fb) and proton saga blm cc(fb)
hope it helps

This post has been edited by kob3bryant: Sep 2 2011, 06:21 PM

Okie bro~ thanks for the review! Appreciate it ~

13th sept, what time? 10am or 2pm ?
Under carriage and A pillar, okie~

Thanks for promoting at FB for all the club. Good thing to be shared~