ooo! less vCore!! i like that..ahha..less heat

yup, less heat and at least didn't have to buy any hsf anymore.

i need more guide here...

1. there's any chance my cpu can go higher?? do i hv to flash a new bios for my mobo?
2. whats the vcore limit? 2.0v? 2.5v?
3. oc my ATI...increasing agp voltage..is that necessary?

1. always a chance! yes u must flash the mobo bios.
2. see at the bios.
3. no,,,,,,,,it wont do any faster.

so which bios is the best?? mantaray? or else....any1 can send any bios to me??
plz attach with a guide how to flash it...nver flash a bios for abit b4...i hv done for MSI mobo...

Mr_47: vcore limit; see at the bios?? if i put the max vcore, my cpu will 'meletup' or not??

1) i think can at least up to 2.3g. it up to you want to flash it or not. the nf7-s default bios is already good to oc.
2) you should check it on your own. but your hsf . tak payah la oc lebih dari 2v. 1.8volt pun dah cukup panas.
3)sometimes it is required to increase the agpvoltage to avoid artifacts.

if you set the max vcore, then i think we can do some cooking(fried chiken maybe ).

just set your fsb to 200 and vcore to 1.8v and buy new hsf. if you want to oc more , may be it'll effect you ram. corsiar vs . pi beli hypeerX ka bt-d43 ka, baru boleh oc sedap sikit .

wanna ask about bios mod do it here!!!!!!!!!!

http://forum.lowyat.net/index.php?showtopic=152285

the best bios for stability and power is mantarays xt 2t!

yes the cpu will burn if vcore set too high,,,,,,,,,do better cooling!

This post has been edited by Mr_47: Dec 10 2005, 02:31 PM

yeah.. i have to buy a new cooler....
when i set to 196*11.5 @1.9v...
run the sp2004...
my mobo become an ambulance..eno..eno..eno.. (75 celc)
then die...and the sound continue like out of battery...

1T? 2T? which one??
my ram is double sided...

any volunteer to send me the bios that they were talked about??

biz_coat@yahoo.com

thanx..

Double sided. 2T

to be frank..there isn't a 100% proof 1T or 2T is better...coz everyone has their own theories and beliefs..best u try both..and see which results u get better...
i got better OC on 1T...but i also know ppl who got good OC with 2T

cannot set your cpu at 200*11.5 @1.8v?
FYI, rising the voltage is to make your oc system stable in OS. i don't see whether is it related to performance but increasing your voltage more than you should be, you will only get heat .

his psu out of power la!

75C is way too hot. Get a full copper cooler, Volcano 12 or better.

He's using a stock cooler lah. 1.9v for 2300 mhz sounds correct.

Check his sig - he's using the uber un1337 stock cooler.

run in water cooling more better

xp90 + delta fan = bingo (if u cant afford watercooler)

Since when XP90 can fit Socket A?

saying without thinking of course...

lol..i had a64 in mind..sorry

SLK900!!!!

*DOUBLE POST*

This post has been edited by gr2000: Dec 14 2005, 08:33 PM

erm.... can anyone tell me why here....
my setup last time can run fully stable with 250*10 with 1.90v den i just keep it there running ... but this lately few weeks i found out it was totally unstable n windows auto restart somemore now can't even do dat speed only max out about 2.45Ghz with 1.95 izzit i need more burn in ? or my processor dying ? anyone suffering this case ?

p/s : there's nth wrong with my cooling coz it alwayz stayed at 38c idle n 45c full load...

This post has been edited by StarNet: Jan 16 2006, 03:01 AM