Am i bad luck?

I just took my car 2.0p  chasis 6xxx series yesterday morning.

Then happily test drive... about 70km....

Bad things happen to me... the ABS fault shown in my screen... It require service....

then another 20-30 mins driving... the engine light also shown in my screen. I quickly send back the car to the SC near by Jalan Ipoh.

Walao... they dont know what happening after 30 mins... they have no idea with those error light.. (That time i havent read the manual book yet because i just took the car in the morning!)

After that they asked me to Center of Execellence main branch to check! ok!... I must go lor.. no choice what...

What happen is when i am on the way to this USJ there, the hand brake light show on the screen! this is third light liao.... I starting to worry and the celcius showing at the bottom of "D" mode is 46..

Damn hot wor... is that normal?

Finally i reached to main branch at 4 pm. They said must let my car overnight there coz they close at 5pm.... I need to take cab back to my house... WTF >.<"

However i checked the manual book at night and found i m lucky while the car safely send to that Center of Execellent! It is quite dangerous while i quite speedy around 100-130kmh because the car look fine.

This is consider my first car because i bought it my self! I really panas hati and very disappointed with "P". I thought giving another chance to them as ppl complaining their QC problems, but my self kena gao gao...

This happen in day 1... how they can ensure it wont happen again such errors.....

However, i asked my SA installed the auto lock and gear lock only which is not affect those ABS, engine things...

Anyone know whats the red gooey thing???


can I wipe it off??? its collecting dust bunnies.

I found out my car has a slight rattling sound on the driver side passenger sit. Anyone know what might have caused it??

Hi guys, it seems like not only me having this F lemon cars...
I found brothers from here

http://www.inspiraclub.com/viewtopic.php?f=26&t=8093

Siao liao... Start worry again already....

haiz.... what i can say and do the best i did... wait that formen called and file a case if they can work up for me..

Whats that white bar?    Red marking is normal, red jelly thing looks like excessive grease applied there, but no worries on that.

Could the rattling sound be coming from the glove box? Leave it open to isolate the sound. If its the glove box, try stick some thin carpet-like padding on the little latch (both side has a catch latch that goes in when u pull open the lever).

Also the dampener should be secured to the left side, glove box should not just fall open but open slowly. Could have not secured, check with SC or we can fix during the tt..

Whats that white bar?    Red marking is normal, red jelly thing looks like excessive grease applied there, but no worries on that.

Could the rattling sound be coming from the glove box? Leave it open to isolate the sound. If its the glove box, try stick some thin carpet-like padding on the little latch (both side has a catch latch that goes in when u pull open the lever).

Also the dampener should be secured to the left side, glove box should not just fall open but open slowly. Could have not secured, check with SC or we can fix during the tt..

Hi guys, it seems like not only me having this F lemon cars...
I found brothers from here

http://www.inspiraclub.com/viewtopic.php?f=26&t=8093

Siao liao... Start worry again already....

haiz.... what i can say and do the best i did... wait that formen called and file a case if they can work up for me..

I will check it with the SA this Saturday as I'm meeting this to get the remaining of my free stuff. Tonight i'll check my car and take a pic of the glove compartment....Left side ya?

Please let us know the fix to this. We  can put it up as a sticky in the front page to inform others. Could be the abs module since that inpiraclub posting ended after problem identified. Hope everything will be fine with your car.

Hmm...is this ABS module same as ori Lancer or already some other OEM? I just wonder...

Could be different on the newer batch? Mine is 3xxx and clocked 200++km so far no significant problem other thant he glove compartment...that one my mistake during as I overlooked it during checking 

It is still Proton's mistake in the first place. Not you.

Yea, but I din't check it as well . Should have checked more thoroughly knowing its Proton and din't expect they would screw up on simple things. Oh well, I told my SA about it he say when I'm free I can come and we'll go SC together to fix it.

Hmm...is this ABS module same as ori Lancer or already some other OEM? I just wonder...

Lousy QC.

Anyway, I still have to buy Proton coz other marque are a lot more expensive and I don't really fancy Perodua models.

They called just now... as they need to change the ABS module for me and they dont have stock now,

They claimed they have ordered from Mitsubishi.... Cant promise if i can get my car today...

I ll call again later to confirm status and ask for compensation defintely. If not i will write to press!

Therefore the ABS modue should be ori gua....

They called just now... as they need to change the ABS module for me and they dont have stock now,

They claimed they have ordered from Mitsubishi.... Cant promise if i can get my car today...

I ll call again later to confirm status and ask for compensation defintely. If not i will write to press!

Therefore the ABS modue should be ori gua....

Even though P2 QC is better, but I find their cars to be significantly overpriced, not to mention the lack of discounts 

Even though P2 QC is better, but I find their cars to be significantly overpriced, not to mention the lack of discounts 

They called just now... as they need to change the ABS module for me and they dont have stock now,

They claimed they have ordered from Mitsubishi.... Cant promise if i can get my car today...

I ll call again later to confirm status and ask for compensation defintely. If not i will write to press!

Therefore the ABS modue should be ori gua....