hmm..u using 2 sticks of ram? try using 1 stick...it helps since 754 is single channel only...

i think u need to up d vcore.. coz mine also stuck at 290.. then need to up d vcore to 1.48v to achive 300...

could you even bother to look at my CPU-Z!!! it's single stick!!!

ok well i did run dual stick, it shouldn't be a problem cos like i said i already set the RAM to run at around 200mhz or lesser should RAM even if at 2x sticks would not be a hinderance (i could run 2 sticks at 227 mhz k)



would you believe mine won't run even at 299 with maximum available Vcore pumped?

cool down...didnt know you posted cpuz here... well, i face similar prob in my mum's office comp as well sempy 2500+ cant even go 210mhz even at 3:2 devider..its either the board or ram...but in your case, should be the ram that is pulling you down...hehe..why not try out those infinion chips?? works wonders with me...hahaha...not too bad i'd say...

i kacau you only la. normally my forum manners very nice wan kekeke

anyway, i'm on BT-D43 chips. i don't see how my RAM could be pulling me down lor.

now 9x277 @ 2.5ghz i run at /11 divider also can run nicely at 227mhz

so why would my RAM be a hinderance when i try to run 8x300 @ 2.4ghz at /11 (or higher) divider?

6x300 ok la, can work. 8x300 no way, no matter what voltage i put on what thing. and no matter i change the divider to /12 /13 /14 also cannot......... aihhhh.

HyperTransport multiplier, what did u use?

if got 2.5x.... use it.

normally i use 3x. 3x 300 x2 is around 1800 only. is it not good?

hmm...you using dfi board right? just set it to auto and you're good to go..

how do u calculate?

300 x 2 = 600 (1200)
300 x 3 = 900 (1800)

don't have x2.5 ka? if DFI should have 2.5x....

if not, i guess u should live with x2 then. in my case.... somehow 2x will give me no-boot. i use 2.5x all the time.

lemme try 2x. i have 2 boards, NV8 and DFI Infinity NF4x but the NV8 some how seems nicer.

yes, DFI has more tweak options, but seems rather limited in vcore settings (either that or i donno how to interpret the interface ) and yeah, the DFI don't have 2.5x

EDITED : last i did the CPU over-fly thing and my board ended up going RMA.

This post has been edited by goldfries: Jan 23 2006, 07:32 PM

Just order my mobo and proc. S64 2800 and NF8-V2. Hope its a good combo. Will get it b4 CNY.

http://valid.x86-secret.com/show_oc?id=66208
yay. manage to run 300mhz.

maybe the HTT does help. but this one i up vcore to 1.85 already......beyond my liking la. i always try to run at 1.5vcore or whatever the default vcore.

i like silence balanced with power.

ouuuh...... 2.6ghz!!!!!!
http://valid.x86-secret.com/show_oc?id=66209

hrmm...... the HTT thing does help!!! last i tried all cannot.........oh well, tonight got things to play already. this one may end up be on my main rig.

now time to monitor heat and P95.

This post has been edited by goldfries: Jan 23 2006, 07:41 PM

wow...hehe...good to hear tht.. test for stability and you can run at that speed

too hot la. the DFI MBM5 don't support, so i use speed fan. CPU go up to like 70ish.

now i drop vcore to 1.65. heat is at 60c++ on stock fan.

wait till my Ninja come in. the main rig will be using Ninja, 2ndary rig using XP-120.

P95ing........oh now reach 64c. that also casing not closed. aiyah a lot of things la, but the one that gets highest speed will be on my main rig.

going to try the A64 also. more L2 Cache, hope can OC that well.

EDITED : aiks i forgot to test out higher FSB. stopped at 325. hrmm........

This post has been edited by goldfries: Jan 23 2006, 07:47 PM

hehehe.....glad that it worked out fine...your results looks promising... try lowering it down summore...2.6ghz should run fine at 1.6v.....try it out...i'm running 2.6ghz at 1.575v

http://valid.x86-secret.com/show_oc?id=66212
check this out.........
2.617ghz @ 1.488 , even the RAM pushed to 238mhz. (i sure hope i can run dual stick........will test that later)

ok so now........i to prime 95.

EDITED : aiyak not stable. now i do 1.55vcore.

This post has been edited by goldfries: Jan 23 2006, 08:03 PM

ns one bro
keep it up
hope u r another ppl wif 2.7ghz

no la. i tried. 2.7ghz can go but reach Windows - it don't like the most i can do is load CPU-Z and then gone.

but 2.6 also i'm happy already. even 2.5 also i'm happy already.

hehe...nice scores... hehe