super pi 38.1secs....waiting if i can get a pair of TCC5

is there anymore sempron64 bit in the market? coz i c the latest pricelist, there is no written 64bit on it. jz plain sempron only... any1 can confirm me? which sempron model is 64bit?

my sempron 2800+ is 64 bit though...

nowadays most of the higher end semprons are all 64 bit...try looking for those socket 754 semprons...they are 64 bit

how much is the cheapest sempron64 bit?

not too sure..but i got mine for RM290 for the processor alone...

Post your SuperPi 1M results here guys : http://forum.lowyat.net/index.php?showtopic=105812

don't forget to include screenie showing SuperPi and 2 cpu-z showing cpu and ram.

also include your ram and chips

best if can include a64tweaker screenie also.


smokey : Sempron64 2500+ costs below RM210 at lowyat plaza. On the pricelist they don't show Sempron64 because the marketing name for Sempron is Sempron only... without 64. All the latest stocks are with 64-bit.

This post has been edited by soulfly: Oct 1 2005, 12:35 PM

THe cheapest is 2500+ , rm195

is it 64 bit?
the clock is 1.4ghz rite?
how far can this go in overclock?

http://valid.x86-secret.com/show_oc?id=39704
Somewhere here. 350HTT is hard to achieve with my mobo.

soulfy wan to ask, the lastest bios for dfi lanparty ut nf3 250gb cannot recognise the venice e6 oso?

There's a latest Beta Bios which will recognise s64.

Here u go.... use Winflash to flash the latest BIOS

by the way... it's Palermo E6.... not Venice.


Attached File(s)
 NF3LD623.zip ( 330.18k ) Number of downloads: 8

sourfly, when you set your Vcore to default settings, how is the voltage?? cause mine when set to default, its already like 1.4+ compared to my previous bios which shows 1.3+

if everything at default/auto... my voltage is around 1.3v, less than 1.4v... which is during idle

at full load... average reading around 1.37v-1.39v, and sometimes it spiked to 1.4v-1.41v. i think my board got bad circuit resistance.

hmm...so you trying to say mine is actually normal? cause palermo E6 processors are low voltage...was wondering if my new bios actually over volt my processor...

different board sometimes got different reading because of circuit resistance. try check the volt while running prime.

My superpi result

wow...nice scores you got there...
beat me flat already...

next time post to superpi thread la dude. got ranking there...

http://forum.lowyat.net/index.php?showtopic=105812

Finally u got ur DFI. And ur proc potential almost like mine 0528UPMW.