This post has been edited by Vtec(Rock): Oct 11 2005, 05:17 PM


Attached thumbnail(s)

nvm we just c the cpu category

btw Vtec (Rock), try to play with chipset voltage n change the ram n psu, or buy the crucial ram from cycone87 ?

This post has been edited by wtm0325: Oct 11 2005, 05:28 PM

ok.will go buy new TRue power PSU tonight.rate 400W.erm...but sidewinder can go well with hynix chip.man...........

i try do some other setup tonight.will let u all know the result soon.thanx!@sempron ROck man!

ooo....will wait for new results...

Vtec how u do 3.15v for Vdimm? DDR booster?

[Edited] Just realise it 3.3v rail.

This post has been edited by Cyclone87: Oct 11 2005, 06:29 PM

hahaha
just 2.8V lor

To whom ­who has a problem with HTT above 295MHz when memory divider is set to 133: Just change Row Refresh Cycle Time to 12 (or 11) by using A64Tweaker, and then use ClockGen to speed up HTT.
On my rig (Semp. 2600+ E6, Abit NF-8, 2x256MB DDR400 Mosel Vitelic) I have only HTT max = 296Mhz when RRCT = 10, when I set it to 12 I can reach 337MHz with 133 divider now !

doesn't pumping the Vdimm helps for CL??because i my mobo doen't have Vcore option so cant add it,just add Vdimm till 2.6 & run my ram at DDR470 CL2.5-3-3-7.....add Vdimm till 2.7 or 2.8 doesn't help for CL2.0-3-3-6(can't boot).....maybe my ram too hot,need to add heat spreader??

wow...thx...i'll try it out... currently i'm running at 325HTT....at 2.5-4-3-7 133 devider....

tht means it only clock above 295mhz in windows but not bios?

he means that if you're not stable enuff

For those who use DFI nF3 250Gb, u can use a64tweaker to test your stability. then when the right configuration found... u can set it permanently in the bios.

Other mobo might not be so luck because they don't have the extra timings in the bios like those tuned in the A64tweaker

This post has been edited by soulfly: Oct 13 2005, 03:38 PM

thts y NF8 very picky on ram

btw soulfy, ru able to hit 350htt n above?

not yet tried. maybe because processor at its limit already. i dun think i wanna put more voltage.... 1.6v for 2.7ghz sounds enuff for me

unless the multis are unlocked downwards... there might be a chance

wakakaka icic, i'll try it later, seems 0528UPMW is really a gem

u should've try it instead since u have the 'DFI' now

Yup.. good suggestion. DFI mobo is well known for it's good performance. Also good for o/c.

woh............i hit 325HTT now.after change the pure power PSU stable alot and can go higher.cool!i love it.but ram must stay at 133 divider.wtf!
hehehehe........so happy now.hope after burn in can go higher.cool!

What ur setting for 325HTT in bios on NF8? Or did folo Binh advise reducing the Row Refresh Cycle Time to 12 (or 11) by using A64Tweaker, and then use ClockGen to speed up HTT?

cool dude, wat psu u used btw? can go aboe 325htt?