Wtm03250, i have 2 s64 with me now. And both also OC better with 1T. And for high HTT >325. I can get stable even with 2 stick of ram. But mine not DT-D43

ur ram is double sided or single? yuo i noticed with 1T better, but using 2 stick btw my dtd43 is double sided, or will it be psu problem? well i guess ram

I think ram prob. NF8 is damn picky for ram. I tried with my corsairVS which able doin 222mhz 11-3-3-2.5 on my NF7s. But it wont even boot if i up my HTT to 300 and with 100% or 133% divider. If 133% , the ram suppose to run at DDR 400. But it juz duwan to boot even with wat timing,1T or 2T. But with my micron, it able take up 345HTT.

Cyclone87, how much did you buy your S64 2800+?

[COLOR=blue][COLOR=blue][COLOR=blue]seems like my case try booting like mine 292htt with 133, i think it should works if u r using 2x512mb cvs

soulfly, i brought for rm320 . i brought 3 piece so far. 2x 2800+ and 1x 2500+ and all giving me almost the same OC result on my NF8 and crucial ram.

wtm0325, i can get HTT295 max when using corsairVS. This nf8 mobo really picky for ram. So headache. Now i need another piece of ram. My currently 512mb not enuff. Should i get a hyperX 512mb and pair it with my crucial?

hyperx normally is bh5 i think, our 2.8v not enuf for it wats ur ram chipset?

u run cvs with ur crucial together? i scare later u'll hv the same problem with me even with good ram

Nope, i running my crucial alone now. Looking for another 512mb crucial now or any high performence that can pair with mine. I gonna use my corsair on my 2ndary rig .
Btw i juz test with my bro DDR333 infineon chipset, it giv me a max at 325HTT 7-3-3-3.0.With extra juice and relax timing, there is no improvement. I feel it ram that determine our max HTT even on divider.

This post has been edited by Cyclone87: Sep 16 2005, 08:57 AM

o? which divider u r running now?

yesterday i test my cpu benchmark with 3dmark03 as my main purpose is gaming, so i used different combination of htt to test out which will has the best performance

tested 265htt 1:1 3-3-3-8, i get 876 for the cpu score
using 292htt 200:166 234mhz 3-3-3-8, i get 860

i wonder the fsb give so much score for the benchmark, can it be trusted actually? how bout u all, mind to run 3dmark03 cpu score n show off here

Just wondering....both settings are using the same HTT multiplier?

if u mean mine, yup, both at 3x

walao nice ehh!! on 1:1 can do 265HTT.. if only mine oso can..

hehe...i also can la..but not stable only...
dunno why my temps so high...idle 44 load 58
will it do any harm?? and my Vcore is set to 1.5v but cpu-z shows 1.55v....do you think i should lower down the vcore or leave it as it is?

my full load also nearly 48-49 if idle 38-40

dunno la..its either my mobo's temp probe got some problem or my AS5 not properly applied...

ermm offf topic did sempron 64bit support CnQ

Running at 2.7ghz 337x8 with 1.47 vcore, i only have max of 47C with my xp90 with delta FF (mod to 5v). Btw i didnt use as5. Becoz 2 time after i apply as5, few days after tat i hardly take out my heatsink..the proccessor will come out together. Scary//

anyways, good luck guys in ur semprons overclocking journey.

I'm back to p4

cool n quiet is not supported in sempron is it

only for 3000+ n above