Nice OC!
2500+ is 1.4GHz and having 7x multi?
Sempron64 2500+ , 2800+ OC tests
|
|
 Aug 28 2005, 01:20 AM
Return to original view | Post
#1
|
 
Senior Member
4,672 posts Joined: Jan 2003  
|
|
Quote|
|
|
|
|
Aug 28 2005, 05:18 PM
Return to original view | Post
#2
|
|
Senior Member
4,672 posts Joined: Jan 2003
|
QUOTE(Cyclone87 @ Aug 28 2005, 04:03 PM) My mobo sys temp= cpu temp, n cpu temp stuck at 115. >_< btw i already stop playing with HTT. Cant get throught 345 for me. It the mobo limiting me. 345MHz is really impressive.... Most NF8 mobo reviewers only hit ~310MHz.   BTW, what's your CPU steppings? |
|
|
Sep 3 2005, 02:55 PM
Return to original view | Post
#3
|
|
Senior Member
4,672 posts Joined: Jan 2003
|
For RM370, I think it's better to get Abit NF8 for some ~RM300, use the rest to buy a 2nd hand vga card. (GF4MX maybe?)
|
|
|
Sep 6 2005, 01:09 PM
Return to original view | Post
#4
|
|
Senior Member
4,672 posts Joined: Jan 2003
|
QUOTE(wtm0325 @ Sep 5 2005, 01:09 AM) thts the ram problem rite? try to lower down ur htt lo... Because urs is NF8-V2.btw anyone know how to calculate divider? my cpuz showed my ram was 234mhz, but memtest showed 242, izzit somethin wrong? n i found my nf8 less 4 capasitors, how bout urs cyclone n kusingfight? i doubt tht might limit the OC capability  http://www.abit.com.tw/page/sa/motherboard...PE=Socket%20754 |
|
|
Sep 16 2005, 03:35 PM
Return to original view | Post
#5
|
|
Senior Member
4,672 posts Joined: Jan 2003
|
Just wondering....both settings are using the same HTT multiplier?
|
|
|
Sep 19 2005, 08:59 PM
Return to original view | Post
#6
|
|
Senior Member
4,672 posts Joined: Jan 2003
|
I think it's a good o/c.
|
|
|
|
|
|
Sep 20 2005, 10:53 PM
Return to original view | Post
#7
|
|
Senior Member
4,672 posts Joined: Jan 2003
|
QUOTE(Cyclone87 @ Sep 20 2005, 09:29 PM) Ijuz got myself a new 2500+ , tmr gonna test it. Turtore it. ^^ Whoa.....why r u having so many semprons lol... |
|
|
Sep 21 2005, 02:09 AM
Return to original view | Post
#8
|
|
Senior Member
4,672 posts Joined: Jan 2003
|
QUOTE(kucingfight @ Sep 21 2005, 01:25 AM) Assuming 41.5C is on load? Yeah, as always remove the sucky stock thermal pad and replace it with As5 or something No, that's actually the idle tempt. His full load is ~51C. What shocked me was, when I tested his CPU with sp2004, the tempt rose from 41.5 to 50C almost immediately! (yeah in like 1 seconds or less!!). So, I'm wondering if the reading is accurate. BTW, I touched the hsf, it's just slight warm, which I think is far from close to 50C. Good speed u have, ramp up the HTT. keep al voltages at default. Set the divider to the lowest and increase the HTT. what's more...mmm.that's it i think. Of course..Prime it for stability  |
|
|
Sep 21 2005, 03:09 AM
Return to original view | Post
#9
|
|
Senior Member
4,672 posts Joined: Jan 2003
|
QUOTE(kucingfight @ Sep 21 2005, 02:58 AM) btw, has as5 or some thermalcompound applied? Yeah, but it's a brandless thermal compound. Should apply some AS5 eh?? |
|
|
Sep 21 2005, 12:54 PM
Return to original view | Post
#10
|
|
Senior Member
4,672 posts Joined: Jan 2003
|
^^
So, hows the 2500+? Have u tried to push higher than 2.3GHz? This post has been edited by davidletterboyz: Sep 21 2005, 12:54 PM |
|
|
Sep 21 2005, 09:57 PM
Return to original view | Post
#11
|
|
Senior Member
4,672 posts Joined: Jan 2003
|
QUOTE(soulfly @ Sep 21 2005, 09:36 PM) aakk.... how did u know? 0527EPAW A = Gred A B = Gred B M = Mixed others = POS But I think this is not an accurate indication. |
|
|
Sep 22 2005, 05:35 PM
Return to original view | Post
#12
|
|
Senior Member
4,672 posts Joined: Jan 2003
|
QUOTE(Cyclone87 @ Sep 22 2005, 05:25 PM) I just install up kucingfight 2500+ with NF8. And the result is i cant get anything above 293HTT with BT-J or corsairVS with 133% divider. Only able to go around 320-338 with my old kingston VR Ddr333 and apacer ddr333 with 3/2 divider. Nf8 really giving me headache. It love cap ayam ram. >_< Hmm..........how about the Crucial rams? Can get the same HTT as your 2800+?? |
|
|
Oct 21 2005, 12:06 AM
Return to original view | Post
#13
|
|
Senior Member
4,672 posts Joined: Jan 2003
|
QUOTE(hellokitty @ Oct 20 2005, 02:43 PM) Abit NV8 (Nforce 4 4x) Haa!! Finally someone with NV8 did some o/cing! Sempron 2800 0532 TPMW 1.45v 325HTT x 8 multi 2.6ghz stock cooling Ram Twinmos doublesided 512mb = 2.5-3-3-7 1T Memdiv = 266 = runnig at ddr436 LDT = 3x Question : how is this performance compared to Week 0527 xxDC anyone knows ??? bought the MSI NForce 4 4x = MSI K8N Neo3 to test but somehow the BIOS does not show vcore settings So decided to stick with abit (tried and tested ) Jap capacitors temps at stock quite hotler,...48-50c nonaircon room bte did you know that the nv8 has vdimm up till 3.2v  BTW, prime stable? Vdimm until 3.2V? Not too bad! |
|
|
|
|
|
Oct 25 2005, 12:51 AM
Return to original view | Post
#14
|
|
Senior Member
4,672 posts Joined: Jan 2003
|
QUOTE(wtm0325 @ Oct 25 2005, 12:22 AM) i stuck at 335htt coz when i claim over this amount i hv to add vcore, currently running at 1.45v Nope, I've seen HTT near 400MHz with nF3 using DFI LP nF3 mobo. Anyways, it has more to do with the memory controller than mobo only. btw i only seen max htt 350htt using nf3 chipset, higher than tht only nf4 i seen |
|
|
Nov 9 2005, 12:58 AM
Return to original view | Post
#15
|
|
Senior Member
4,672 posts Joined: Jan 2003
|
QUOTE(wtm0325 @ Nov 8 2005, 10:01 PM) dun forgot u r using 6600GT n sata, mine is only 9550gt n pata 2mb, my 3dmark03 oni 3.5k I don't think 3dmarks will be affected when u r using SATA or PATA. So as CPU score. However, CPU speed tends to increase fps in Game Test 1 of 03' and 05'...that's how they lift the overall score by o/cing CPU. cyclone proc is a lot faster, his CPU score at 3dmark03 is ~990, tht's almost equivalent to 3800+ X2 le... mine is ~946 oni...  |
|
|
Nov 9 2005, 02:00 AM
Return to original view | Post
#16
|
|
Senior Member
4,672 posts Joined: Jan 2003
|
QUOTE(wtm0325 @ Nov 9 2005, 01:02 AM) well wat i mean was pcmark05 Oppssss Sorry....I didn't read properly.  |
|
|
Nov 9 2005, 04:46 PM
Return to original view | Post
#17
|
|
Senior Member
4,672 posts Joined: Jan 2003
|
QUOTE(antonio_zth @ Nov 9 2005, 03:12 PM) 2500+, DFI Infinity nF4X PCIE = 345HTT Still Priming...stock voltage...Rams at 1/166mhz...speed aledi in 2.4 area.. That's a nice combo. I'm thinking of buying the same combo but I'm afraid of getting CPU with lousy mem controller. Anyways, what's the stepping of this 2500+? |
|
|
Nov 10 2005, 01:35 AM
Return to original view | Post
#18
|
|
Senior Member
4,672 posts Joined: Jan 2003
|
QUOTE(Najmods @ Nov 9 2005, 09:21 PM) Well,I suppose to buy a Sempron 2800 early on,bcoz this stupid DFI mobo is very picky when choosing memory.And I bet the BIOS engineeer of this board pick their nose a lot too.... Could it be BIOS settings problem?  now Im stuck at 1.89GHz and the divider wont work,it only works under 250HTTIf I buy a 2800 I supposed to get 2.16GHz now   |
|
|
Nov 15 2005, 08:28 PM
Return to original view | Post
#19
|
|
Senior Member
4,672 posts Joined: Jan 2003
|
^^
Haha, he even asked u to jump down from building. LOL Anyways, i think he needs a new pair of glasses. |
|
|
Nov 16 2005, 12:44 AM
Return to original view | Post
#20
|
|
Senior Member
4,672 posts Joined: Jan 2003
|
1. With DDR400, u can use divider when u hit higher FSB. But how high the FSB goes will depend on how good the memory controller is (which is basically depends on steppings/luck) and also the mobo (lower priority than memory controller).
2. I am assuming u r getting an AGP setup. So, KV8PRO is OK but I recommend NF8 (or DFI LP nF250gb if u can afford more budget.) I haven't seen KV8PRO getting FSB as high as NF8 (max is near 350MHz from Cyclone87 i think) |
| Change to: |  0.0309sec
 0.62
 7 queries
 GZIP Disabled
Time is now: 28th November 2025 - 10:41 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.