For OC, Abit/ASUS/DFI and etc

Oh yeah, does Abit boards still flunctuate during load on the LGA models??

hmm... don't take asus p5p800 lga775 board...

i can't oc over 3.6ghz ... max is 3.6ghz.. can't go further no matter how i try...

if i get the best OC mobo..
then what cooling is the best for prescott..
not over than RM 190..
want idle temp at 30"c+

This post has been edited by aad_lfcfn: Sep 3 2005, 10:48 AM

get either thermalright xp90 or xp90c.
but if ur using prescott i doubt it can b around 30c after OC.
for that must go for watercooling oredi.

idle temp should be around 40c++
with stock hsf, the idle temp for presscott is around 50c

I have the same proc as urs..
using Abit AS8-V


P5P800 can overclock very well..u need Vcore Vdroop mod..
P5P800 vcore very unstable.

walao...u guys pro man,im using a 531 idle at 55C darn hot man my CPU...what HSF did u use on ur 531,& u manage to OC it till 4Ghz?

Izzit really Intel board cant OC cause im using an Intel board

just noticed this thread...hmm...fuss fuss

anyways intel mobo is a NO-NO for overclockers since..there is no way of modifying any 'MHz'.

i think newer Intel's motherboard BIOS settings have a "Burn-In" feature which allow you to overclock 4-5% from the default speed.
but the vcore, vdimm locked

Evogenix

wah la..so hot huh urs..

here's screenie with dual prime95 for 1 hours plus.
Full load : 51'c only.

im using TT Silent tower with 2 fan..

this is my friend rig. that day he ask me 2 install sth for him, than i tangan gatal, use his com n oc!

ram forgot what timing liao, it is 2x256mb DDR400 KVR.


Attached thumbnail(s)

Darn,if i found this thread earlier,i wont get a Intel mobo... my 531 are using stock HSF,duno why its so darn hot compare to other 531 user...

how can i get into the bios system on a intel mobo,once i on my pc it will show a Intel logo,then jump to XP loading...any short cut key to enter bios?

press delete key.
environment temp also affects the proc temp.
make sure casing airlflow is good.

im using prescott 2.4A 533 mhz and keen to know how far can i OC?

i read some website and it says that stepping of 2EL able to touch 4 gig

My stepping is the same

right now i able to OC till 3.24 gig without touching the Vcore...

anyone can provide any info?

I got the P4 2.8E, prescott 1MB L2 cache. and idle temperature is 42c and when i use to play warcraft 3 3 hours the temperature around 52c, after i close the warcraft 3, the temperature will slower down from 52c to 44c with in 10 seconds. but when i oc to 3.0 the temperature will up to 60c not full load. i think if full load, then ................, so anybody suggest me a good CPU cooler heatsink, less than RM100,

Thermaltake or cooler master suggest me

..dontt know wether my mobo detect correct temperature or not..
now,,using stock HSF,my P531+ temp just around (38-42) idle..
.your result?

my P4 531 idle at 55c load at 65c getting hot in here

It is normal for prescott to run that hot, but you have to be aware of thermal throttling as well. There will be no gain from overclocking provided the processor is throttling down due to excessive heat. Attached is a monitoring software commonly used to observe throttling activity.

Anyone suggest a good cpu cooler for my P4 2.8E?

budget less than RM100