i915 chipset = locks upto 10% of the standard FSB, after that it wont boot.. ada safety mechanism..
if you still wanna playaround with your current mobo, you can try adjusting its chipset voltage (if you have that option la.. will increase 10 - 15 MHz jer, but better than nothing) ..

btw, where did you get your ES from? and how much?

nizamextreme, if u want to oc more.
sell the board and get a nice i865pe or i875 board.

nizamextreme !!!!!!!!!!!!!!
wat fan lai de?
led fan got 92mm de meh??? 
where u buy it????
i want led fan for my hyper48 too..

sorry. my mistake but still...
sell the Intel board and get something from Asus/Abit.
You should be able to squeeze the every potential of the CPU

Yup divider set at 5:4
My graphic only 9550V+ woh. What to expect from 3dmark05 leh?

I want to break 4ghz~!!!!!...
but hell shitt...  i can't get anything further 240 fsb...
meaning that max i can go is 3.6ghz ...

aihh... i;m repeating over and over again in lyn on my ocing problem..
but till now... still no solution... sigh~``...

anything above 240 fsb.. , it'll fluctuate like maddd...
jumping like 3.6ghz -> 2.4ghz -> 2.8ghz -> 1.8ghz -> 3.5ghz -> 3.2ghz
SIAW!!!!!!!!!!!

and YES, i already turned off those bios settings such as, thermal control, spread spectrum.. bla bla....

Hell yea.. still can't get to 4ghz after tried for half a year already..!!!
SOMEONE PLS GIVE ME MY 4GHZ...!!!! lolzzz..

yeah...  i'm curious of what's internal clock ??????????????
mine shows internal clock 4ghz...``
is it the internal clock limitation????

Well its seems a failure i cant boot now..theres a beeping sound very fast ones..so where did i do wrong...ermmm   

ya i know..but personal warranty void cos the board is mine previously..i sold it to him few days ago..
temp was good..idle at 40ish..load at 50ish..

Hi guys,..

Is it normal for my temp to go from 53C at load to 65C just by openin my winamp visualisation.I just put in artic silver 5 but just using stock HSF.idle at 44C.

my 2.4c D1 is currently overcloked to 3.2Ghz. ram timing is 2.5-3-3-7 and divider 5:4. my ram is OCZ platinum EL PC3200 rated at 2-2-2-5. my processor is running on stock HSF and just recently i have cleaned the surface of the cpu, so there is no more cooling cream, only pure contact between the cpu and heatsink. on idle, the temperature is 40 while in full load it's 50. so far so good as it is stable and passed all tests.

my question is can i go higher without risking of damage to my cpu. how high can i go with stock HSF. i'm sure i haven't hit the wall yet, but i don't dare to push higher, risking my components.

any advice will be appreciated

when i say 50 celcius on full load, i mean the temperature of the heatsink only. that's where my temperature probe rests. but i don't really know the real temperature of the cpu

i'm using ABIT IS7 (pure) with OCZ Platinum EL PC3200. at 1:1 divider and 2.5-3-3-7, i can reach 3Ghz which i think can go a liltle bit higher. at 5:4 divider, i was able to hit 3.2Ghz in just one try, no sweat. and again i think can go higher.

i'm just a little bit worried since my cpu now don't have thermal paste and it's on HSF.

All Sifu here,
I am using a Pentium4 531prescott 3.0ghz,
and a MSI 7028 915P Neo2 Platinum with DOT(Dynamic overclocking technology)
well, i have a CoreCenter software,
i am thinking of trying OC my Proc
and my ram is 512 corsair value ramDDR2 533
All i need is just increase the FSB in the corecenter is it?
or should i do in the CMOS?
how should i do?
and 1 more question
do increase vcore void the warranty?if i didnt burnt the proc due to OC
Noob in OC here
thanks for help

@nizamextreme
ok thanks for the info
so will OC void the warranty?

u mean once i increase the fsb
then the warranty void already??

40'c i think is not that easy for this moment coz i am using stock HSF
anyways,
thanks for the infomation for my further OC with some more decent HSF