Hehe bro u misunderstood me lah...3.6Ghz only on stock vcore lah brooo... ....mine Q748A095...owh, I used multiplier 8 since I heard it's better but cannot go beyond 3.8Ghz...There's something wrong so any sifu here can tell me?NB voltage or McH maybe?

---

Added on April 1, 2008, 8:00 pmAnyone can help?And 1 more, why my mobo got double boot problem?Is it normal?

This post has been edited by Izwan898: Apr 1 2008, 08:00 PM

so can teach me about p4 3.0ghz??

Get vmch up.Stock vmch voltage is good for up to 440 or so.

Vmch?how much need to increase?(noob questions sorry)

This post has been edited by Izwan898: Apr 3 2008, 04:50 PM

bro....when i startup my computer i haf a few beep sound....wats tat suppose to mean? error ar?? wat kinda of error and how to fix it? its kinda irritating though....the sound.....

They are error codes. Maybe you can check on the manual what it means.

what mobo can go higher than 500fsb?
my p35 ds3 cant go any higher than 500fsb..

This post has been edited by fesick: Apr 7 2008, 12:25 PM

DFI DK

i heard foxconn mars is not bad either....

anyways.. my previous ds3 also stuck at 500 fsb

This post has been edited by tkh_1001: Apr 7 2008, 07:23 PM

foxconn mars is good... i got read the review at PC gamer magazine april !!!

hehehe..i know la u got dfi edi..
i`ll reconsider that one..
and bro..anyproblem when u install ur xigmatek on that board?
did it touch any heatspeader near to it?
if not..sure i target this one leh..~

this board ok..but haha..dunno why,i dislike the design..hahaha

Cheapest one will be IP35E

erm to install xigmatek on that mobo is kinda hard if u want it to exhaust rearwards... u will have to bend a few fins as the HSF will hit the NB heatsink...

but i sayang want to bend the fins... so i just install it exhaust upwards since my cm690 got exhaust fan at the top

im thinking to get same case as u too..
so like that need wait again la..

hello OCers..
im just getting started to overclocking..
im using Gigabyte GA-P35-DS3 mobo + Intel C2D e6750..

i dont really know how to OC my proc.. all i know is EasyTunePro 5 has the feature to OC my proc.. shd i just do it frm there?
what are the other things i need to take into consideration?

thanks

You can check out my guide on overclocking. I was using the same CPU/mobo when I wrote the guide.....

thanks to kmarc's beginners guide to OCing and also guides from vincentlaw,
i finally tested my first OC skills this evening..

the results..
3.4ghz, 425mhz x 8, 1.375v
core temp average at 58c for 3 hours on Orthos

critics & comments are welcomed



This post has been edited by amalmuahahax: Apr 9 2008, 03:48 AM

hrm.. I want to oc too, but worry got some instability problems.. and I know it will definitely wear my pc components faster.. but normally if oc instable increase voltage abit but be carefull and take small steps and not leap.. eg. 1.4v to 1.41v.. safe way happy oc-ing

Hurm..
Let say im using q6600+ep35 ds3/p35 ds3...
Can overclock without cooling system??

If you're stressing the proc, make sure you use the "Small FFT - stress CPU" option rather than the "Blend test" in orthos.

That's a nice OC.... last time, my E6750 was running 24/7 @ 3.5Ghz @ 1.425v (set in Bios).... (Not a gem proc....)

You mean using stock HSF? You can overclock but it will be limited by the temperature. Keep you core temperature around 60-65'c.....

This post has been edited by kmarc: Apr 9 2008, 06:42 PM

yup2.. i did that to at first but forgot to take pic.. anyways the result was 60c average.. huhuhu quite high