is that my stock vcore rite? (in red circle)




i try on 3.6ghz on 1.4V..
but didn't try with stock vcore..

in vincentlaw review his e6750 stock vcore is 1.325v..
mine is 1.28v ?


and when i reset to default 2.66ghz and default vcore..this is the temp with Real Temp



This post has been edited by sukatra_aicaca: Apr 10 2008, 10:23 PM

if u so worrie bout ur temp..
just apply new tim on ur ihs

@sukatra

erm.. i dont know if that shows ur stock vcore though cos i have never used rightmark before

but u just go into BIOS n set ur vcore to "normal"

then ur proc will run at stock vcore already...

u go n have a try on that 1st n try to find the max clock u can get

juz order Tuniq-TX2 from bubucai
maybe next week arrive...

i'll try.then i'll post it later

This post has been edited by sukatra_aicaca: Apr 10 2008, 10:46 PM

from the kmarc 2torial
i set 380 x 8 = 3040mhz in bios
then is oc 'sikit demi sikit' in window with easy tune from 3040mhz to 3200mhz with stock @ "normal" vcore
in cpu-z the voltage is 1.328v but why in easy tune the volatage is 1.387v ?



the temp is high
i think thermal paste is the problem

maybe can't go high with that temp.
i'll be back when my Tuniq-TX2 arrive

This post has been edited by sukatra_aicaca: Apr 10 2008, 11:43 PM

@sukatra

i guess u tertekan the "save" button on ur ez tune5 ler... try to adjust ur ez tune5 vcore to 1.28v n then click save again... i think that is ur VID under ur hardware monitoring option right?

This post has been edited by tkh_1001: Apr 10 2008, 11:28 PM

here right?

nope...i meant ur eztune5 hardware monitoring under pc health section keep on trying bro

ya..i know..i show the VID...not the software...

anyway,1.387v can't change to other value la bro.
i've changed it to 1.325v,and save.
then i restart,it become 1.387v again.
i think cannot aaa

bro, this happen to me too... but im using DS3 rev 1.0.... imo manual tweaking (go bios and tweak) is better and i prefer doing that compare with using eztune because i have this kind of difficulties also where when i set something at eztune then when i restart the pc, the setting will be where i started from..

ya ya.. tweaking using eztune not good lah.. eztune also alot of probs so far..
best is in bios

not to say not good la... my eztune still can increase or decrease fsb but not voltage... the voltage will only set on windows but after restart everything goes back to normal...

ps:im not sure bout other but that is what i experience from my gigabyte mobo....

i use eztune pro on my ds3..
if lazy to restart pc just use eztune loh..last time only manage to go 505fsb..nut so effete,mobo couldnt resist

i've update my easy tune 5 to easy tune pro...but after restart,that easy tune cannnot use la..error...
maybe my temp become high coz of my cap ayam icute casing kot...



This post has been edited by sukatra_aicaca: Apr 12 2008, 05:10 PM

i dont think its becos of casing.. i also using cap ayam casing.. but i let the side panel open at all times..


2 things i noticed about eztune5 / eztune5 pro:

- 'original' always same as 'current'...
- after few hours it will close by itself, saying theres error

hak hak...
i also dunno what happen with easy tune..

This post has been edited by sukatra_aicaca: Apr 11 2008, 04:33 PM

That could be because it is corrupted due to previous unstable overclock. It could also be because your current overclock is unstable.....

This post has been edited by kmarc: Apr 11 2008, 06:46 PM

hi, i have OCed my e2160 to 2.9g with stock voltage and cooling. i think i got myself a gem coz i suspect my proc can break 3g with stock. however my ocz reaper 2x1g pack holding me to hit ddr1000. anyone can gimme some guide on this ram timing & how to reach 500mhz?

p/s: i read at software discussion subforum that vista is not suitable for OC coz of heavy load. is it true? im using vista ultimate.

This post has been edited by gamers maniac: Apr 11 2008, 11:07 PM

Well you havta increase your vdimm up a notch and looser timings...CL5
But bro its better you use 1:1 to check your proc OC capabilities 1st then the rams..
2.9 on stock vcore and cooling is a good start...

This post has been edited by Bigblock: Apr 11 2008, 11:09 PM

ok, i'll try finding the max of my proc on stock. btw the ram is currently at 5,5,5,15 wif 2.2vdimm. wif 2.3vdimm can do 4,4,4,15. both on ddr950@466mhz. anything above this setting will give memtest error. however except for those timing i set manually, other option i set auto. mybe anyone can give guide? my mobo abit IP35-E. tq

p/s: 3gig wif slight increment achive! however the ram can't reach drr900. if not 3g wif ddr900 for daily used will be d greatest thing happened to my life

This post has been edited by gamers maniac: Apr 12 2008, 02:54 AM