Not taking much picture. Here some.
[attachmentid=2203620]
Power cable run inside A pillar cover. Tapping power from 12V socket. Notice the oldcar derived sports paddle.[attachmentid=2203622]
The picture of tweeter location. Our Insight comes with no tweeter. The tweeter mounted on its mesh cover panel (not in the picture). Pry the cover out carefully using supplied flathead screwdriver. Use standard size tweeter of good quality. Wiring the driver side can be a bit tricky but doable and have to be careful not to dangle on steering shaft.

Sorry no picture for the subwoofer yet. Will take if u wanna see. Wiring all done by ur's truly. No wires were cut during all these installation and they were all removable without a trace.

No more 'old radio' sound. My fren were blown away by the sound and thought it was oem. he even comment that japanese model all perfect. Haha.

That was my concern also before this mod.

But confirm, u can disconnect the cables and reconnect without problem. Reset back the clock, bass, treble, fader, balance etc and off u go.

      awesome bro! I also wanna install a set of tweeters on the dashboard. Can give me more precise instructions to do it? With pics would help alot.
At the moment the sound system without tweeters is just very bland.. What brand tweeters did you install?

Found some stuff on ebay.. Original OEM Mud Guards, Cargo Tray and Floor Mats

OEM Floor Mat, Mud Guard, Cargo Tray
USD 195~RM575(2.95).., tho this one doesn't ship internationally, some others do. Wonder if its worth it.

Also found some nice VG SharkFin Antenna, on insightcentral. I think it looks pretty cool.

very funny, i have call 4 honda dealer give different price, Rm300 Rm330 Rm400.
then i ask y different price, they told me they took the accessories from outside accessories shop,

i tot honda dealer selling honda product only how come selling aftermarket product

I just use a pair of normal soundstream tweeters.

I'll come up with detail diy instruction to mount and wire the tweeters.

bro watonk, im already DIY put tweeter on the tweeter mount, it fit 100% nicely, i also DIY the Reverse Aeroplane Sound

Got it from a fren working in used car/parts dealer.

Few time sampling. 1st he brought me old EK mudflaps sets but the side profile didnt match. later he bring this and that and finally the one u see from the picture. I'll confirm with him again from which model but its definitely OEM Honda. Some fitting and screwing skill needed to mount those flaps. Sturdy and tested in heavy rain, and wind speed up to 180kmh. (yes i've gone to 180kmh)

I went to tyre shop just now to do alignment and find out the the front is OK, -0.1 left and 0.0 right. 

The left rear looks a bit strange to me because its not 100% straight so I ask them to check, to my surprise:

Rear left -0.8, Rear right -1.4, and its not adjustable and they advise me to claim honda.

Anyone checked their insight rear alignment?

That was my concern also before this mod.

But confirm, u can disconnect the cables and reconnect without problem. Reset back the clock, bass, treble, fader, balance etc and off u go.

Just got my 3rd leaves on 4.8k mileage http://t.co/zehbEIF

Just got my 3rd leaves on 4.8k mileage http://t.co/zehbEIF

wow so fast going to hit 5k mileage already.