got setup his project soon...hahaha...

got his stacker oledi for the wc goodies to party

Any idea where can get tubing slicon?And which one good for liquid? Battery water or coolant + water?

must use coolant with batt water. coz batt water is deionised. if no coolant then it's gonna corrode the blocks.

hrmmmm.... depends on the loop, if cpu block->gpu block ->res->pump i'll guess it will do, but the BIX2 larrr, what fan?

whoaaa uzai is goin big time on w/cooling yeah.

Tubing? ace hardware got a few decent tubes, kedai hardware... most clear tubes are silicone, rubber one mostly water hose and condoms.

IMHO opinion Distilled water or UV filtered water (the one that kills most living organism), where to get? ayo... battery water will do then... coolant depends which type, car radiator is not that good wif pc wcooling..

car radiator or radiator coolant for cars not suitable for pc WC?

I think the BIX2 is okay la. got 1 NMB and 1 nidec beta triblade. now i'm using one fan only and its quite cool.
u guys think can tahan?

and will the TT aquarius really restrict flow? cos its channel width is quite small right?

Isn't true? That's means just using battery water la.

BIX2 needs high cfm fans to perform, otherwise even a BIP can vegetize(mensayurkan) the BIX2.

regarding TT aquarius... if you're in doubt bout the pressure drop, i'd suggest get a higher heads pump... one that can do 3.1m Hmax... but why not just give a try first with the nirox cause i'm a bit vague about your set up, if got pics

.. correctomondo mr ikan... most of the old timer w/cooler just use plain distilled water (pharmacy) or uv filltered water.. but when terdesak, battery water will do.

A bit busy lah this sem summore no new toys to play.. Just sit down and look at you playing with your toys lor..

Haiya.. Don't say out loud lah.. Later if im done with it i'll sure you guys will acknowledge about it.. Dun worry lah..

Last time im using a mixture of radiator coolant with battery water and in a few months i can see those green stuff sticked to the inner part of the tubings, damn mafan lah.. Now using only battery water and it works great for me. If you still insist on using coolant sargeant do recommend 1-2 capfull of coolant for the setup.

This post has been edited by uzairi: Dec 26 2005, 02:51 AM

got any difference in temps for only using battery water without extra additives like car radiator coolant?

Coolant are use to have the UV effects and somesay to minimise the copper oxidisation. But to me i just use plain battery water and it's enough without the oxidisation issues.

Did I hear Stacker anyone? Hmmmmm......this is not good for me since I won't be the exclusive one using it for WC'ing anymore. Anyway, been busy trying to get my new RAM's running properly sampai terabai sini. Sorry guys.

well, from prior experience.. with automotive additives temps are higher about 1~1.5 C... bear in mind that automotive additives are meant for anti-rust, anti-boil and anti freeze... it will of course effect the liquid properties in terms of viscocity, specific heat cap., etc... the list goes on and on..

like I said.. uzai is goin big time with his next project, ordered a Storm G4 block, cant wait, cant wait.. unlike us still using our 486DX rig

cheyh... 486DX konon...

hurm.... i guess might be pumping out my current coolant right now and replace with distilled water...

distilled water = ~~ RO water mesin tepi kedai (20 sen per liter) issit?

Hahaha.. Im just a follower.

Im oso using 486DX rig.



What amok said is right, car coolant just increases the temp around 1-2c and its meant to be an anti rust, anti boil and anti freeze. So its not nessasary for us to use it unless u want the UV effect and for those who dont use pure 100% distilled water or battery water.

This post has been edited by uzairi: Dec 27 2005, 07:56 PM

RO water???? what's R. O. stand for? Rip Off?

Distilled water is pure demineralized water which means it's pure H20 without any nutrients(which not good for drinking). It's a bit expensive last time I've got it about RM12 per 4 gallon bottle.

Mebbe the "mesin tepi kedai" Rip Off water is filltered water, check wheter it got UV bathing filtered, if got than you're good to go mebbe i'll try it myself 20sen per litter... hrmm ....

uzairi@ YEAH!!!! Long live the 486DX clan

IIRC RO is Reverse Osmosis, let's quote from Wikipedia.
In simple terms, reverse osmosis is the process of pushing a solution through a filter that traps the solute on one side and allows the pure solvent to be obtained from the other side. More formally, it is the process of forcing a solvent from a region of high solute concentration through a membrane to a region of low solute concentration by applying a pressure in excess of the osmotic pressure. The membrane here is semipermeable, meaning it allows the passage of solvent but not of solute.

More of it is here --> http://en.wikipedia.org/wiki/Reverse_Osmosis

nanti wa kasi check mesin tu got UV bathing filtered or not...hehe

me even more terdesak... use filtered tap water + coolant only

so far no more problem

Good to hear u back in here hmspower. rig ko amacam? Dah lama takde update bang