err.. guys.. im troubled.. cuz i bought the d-tek fuzion v2 WB last year comes together with accelerator nozzle.. i didn't install the nozzle b4.. now maybe wanna try it.. but dunno which size will improve performance or make it worst.. advise pls.. WC specs on my siggy ..

Don't unless you changed that pump. My Storm suffered abit from using a Nirox. Thank god I've moved on since

ah.. okay ..

Pointless,martin labs testing show that fuzion v2 don't need nozzle kit
So nozzle kinda useless
Quad Core Chamber for Quad Core on other hand is useful for quaddie

hi i need help on cooling down my processor my processor is a Q9550 which is being plan to oc to 4 ghz or more. i am currently planning to buy a swiftech apologee and a Black Ice gtx 240. are these two product reccomended for me to oc to 4 ghz. my current system is a combination of an aquagate viva water block and a aquagate mini R80 radiator which has an ideling temp of 50 C ++ and full load of 82 ++ base on occt when is cut off it could still go higher. i hope u guys can help me if the 2 things which i plan to buy is good in cooling it down

aquagate viva doesnt perform that good and will lose to certain air coolers.. what is ur budget?.. swiftech apogee gtz and black ice gtx 240 should be sufficient for cooling ur q9550 for that speed.. oh right.. don't forget that u will also need a pump..

hye guys..

i got 1 super noob question here

currently i am using the H20 120 compact swiftech..

the radiator only provide one 120mm to install. if i change to radiator that

provide two fans to install, is it the performance would be better?

sory again for that question..

it would definitely be better.. not sure if ur pump can handle the extra resistance though..

This post has been edited by IcEMoCHa: Apr 21 2009, 10:21 AM

mine only like this one..


Attached image(s)

that one compact.. hmm shouldn't be a problem cuz the MCP350 pump pressure is quite high..

ok, then which one u choose for the rad..

1. HW Labs Black Ice Pro 2
2.Swiftech MCR220

Swiftech MCR220 would be a better choice ..

Actually, it depends on budget and availability.... If u hav the budget, I suggest u look into HW Labs Black Ice Gen 2 GTX240 rad.... If u choose Swiftech, I suggest MCR320 would be better.... As for availability, HW Labs rad need to order from US..... Swiftech is easier to find....

This post has been edited by Aura: Apr 21 2009, 01:08 PM

thanks alot IcEMoCHa..
will give a try that MCR220..

one more thing, from the picture given (previous post), how to know the size of my tubing?

planning to change it to transparent tubing..

---

Added on April 21, 2009, 1:10 pmeik, why? after doing some reading, i think both them should be in my list.

but when u suggest MCR320, i think u got own reason. can tell me why?

This post has been edited by atomik: Apr 21 2009, 01:10 PM

MCR320 is more superior than MCR220 coz MCR320 can dissipate more heat..... The MCR320 performs more or less the same as the Gen II GTX240.... If u decide to go for HW Labs rads, get the Gen II GTX ones.... No need to consider other models within HW Labs coz Gen II GTX is their flagship rads....

My advice is to go to xtremesystems forums to dig for more information before ur purchase.... If u wanna get HW Labs rads or any rads from the US, just let me know and I'll hook u up with one....

This post has been edited by Aura: Apr 21 2009, 01:39 PM

no prob man .. the kit comes with a 3/8 inch ID(internal diameter) norprene tubing.. so.. any tubing with 3/8 inch ID will be able to fit it.. but keep the tubing as short as possible because longer tubings will cause more pressure lost..


for just cooling the processor, MCR220 is more than enough.. unless u want to watercool other parts too like ur northbridge or GPU.. and if u want to do that u will need a new pump and waterblock as the pump+waterblock that comes with the h20 compact kit doesn't have enough power for it..

This post has been edited by IcEMoCHa: Apr 21 2009, 02:08 PM

just finished read the articles. and understand well the reason for mcr320..thanks Aura..

how much the cost for the mcr320? hopefully not exceed rm240...

oops. forgot to mention that my pump is mcp350..



This post has been edited by atomik: Apr 21 2009, 02:11 PM

bro if ur interested in getting rads or other watercooling parts.. you can also PM bryanyeo87 .. i think hes still selling them..

MCP350 is one hell of a stim pump,in fact it is one of the most powerful pc cooling pump around
@janice,err what about Apogee GTZ,MCR220,Laing D4 and micro res with some 1/2" ID,pm bryanyeo87 for more info
Confirm aquagate eat dust only

hell yeah...for the decent WC setup need to wait to get enough money to buy this, that, this..etc..