Hi again Zheilwane!!

I am looking for the largest and deepest single bowl, undermount stainless steel sink available on the market. Thickness 0.8 to 1mm. What would you recommend?

Have a look at these two HCE sinks


Attached thumbnail(s)

Great! Thanks!

Thanks, Idoblu, that's exactly what I meant! Now I know the brand name, I shall do some more research. But since you're already here and kind enough to answer questions ... how did the Corian stand up to use? Though I do think the quartz countertops look nicer! I just like the idea of no seams where dirt can stick, you know?

I don't remember having any problems cleaning it after 6-7 years of usage
But if you get anything other than white, you can see the scratches

My current kitchen is using quartz countertop with granite sink. I prefer Quartz more.


This post has been edited by idoblu: Jun 21 2016, 09:31 PM

Thanks!

What's the standard sink depth? Anyone use round shape sink?

Mine is abt 6inch+ deep.

Will get deeper one for my next kitchen

Hi, what do you guys think about this sink? (sorry, the site is in chinese)
https://detail.tmall.com/item.htm?id=521422351895

It's tempting due to the size and convenience (knife slots). I'm just worried the spare parts of the water outlet.

very modern looking sink, do measure the breadth of the sink, might not fit wok, oven tray or big items. THe sink is wide but the breadth is estimated 350-380mm from my experience, average wok diameter 380 - 420mm

Thank you. I have check and the sink breadth is slight lesser than 380mm

https://img.alicdn.com/imgextra/i3/17596695...;1759669577.jpg

breadth 380mm at the top for the chopping board, so inner bowl gonna be 360mm +- which is kinda small, measure with your house pots/woks and c whether the size is suitable for you or not

As we notice most kitchen sinks do have this issue, we came out with an extra large inner bowl sink design, this is the maximum breadth suitable for a standard table top size of 600mm. Detail measurements can only be given for walk in customers but this is definitely able to fit standard table top size

This design is only available in Builders Hardware as we get HCE to customize & manufacture for us



This post has been edited by zheilwane: Aug 3 2016, 10:04 AM

Is this HCE sink has a model that is reverted design (big bowl on the right, small bowl on the left) ?

nope, only 1 design.

What u guys use to clean granite sink?

I hardly clean mine
I just use the same washing liquid to wash if necessary
Why? Yours having any problems? What color is your sink? Mine is black

Clorox

no problem but just precaution .. keke .. I am using mine just over a week now .. so far so good .. grey in color ..

zheilwane interested to know your view.

my upcoming kitchen comes with quartz top. consultant suggested to get top-mounted sink for easy replacement in future.

the top can accomodate max 2.5' length sink.

do u have HCE single-bowl sink with 2.5' width (about 760mm)? preferable deep bowl to fit a wok and thickness between 1.0-1.2mm?

no preference to material, can be either granite or stainless steel.

so far, i see model GKS 7851 (granite) or KS7645/7646 (stainless steel) that fits the bill.


i saw some sinks with 2 bowls: 1 big + 1 small. wonder can fit my top or not.

This post has been edited by cybpsych: Aug 9 2016, 11:42 AM

hi guys, what tools do we use to make a hole for the tap on a stainless steel sink?
I had one installed but no hole for the tap. Not possible to bring it back to the shop to do the hole dy..