Yes, Sorento is from China also. Teka is also made in china. Not sure about pyramis. Sometimes, if u cant find info in LYN, you can always google and get comments from other forum. Here is what i got, couldnt get any feedbacks about Sorento and rubine.


http://www.malaysiabrides.com/forum/index....53&#entry206753


http://www.usj.com.my/bulletin/upload/showthread.php?t=24569


http://www.renotalk.com/forum/lofiversion/....php/t2465.html

Rust spots might be due to
1) Rust spots could be due to rusty water. If ur water is dirty, when it dries up you will c yellowish watermarks on it, most people will thought that their sink got rusted.
2) Memang rust

This post has been edited by zheilwane: Mar 25 2011, 01:50 AM

sorento is not new, u can see billboards along the highways, if they are new, they wouldnt have $$ to invest on billboards.
THey have wide range of products & dealers.
www.sorento.com.my

Never heard of sink made of ss316, even if u can get it, the price will be above RM 1k. Stainless steel water tanks are usually 304 grade, if u get a 316 grade tank, it is double the price of 304.

TORA is cheap, RM 300+ can get a big double bowl sink, RM100-200 can get a normal double bowl. Having stock clearance now

Undermount = Sinks undermount below the countertop

Top mount = Sinks placed on top of the countertop

Undermount


Top mount

Sorento only have one model SRTKS2029 and the list price is RM 800, thickness is 0.9mm. What a wise consumer you are aerozs, that is why i keep on stressing, there are many shops out there using hanky panky tactics to cheat consumers. Another common trick, they sell u cheap but they exclude the accessories like the Sink Waste which would cause u another RM 30 each.

Coating at the bottom, there are a few kinds. Some TORA sinks have the coating below, like powder paint. Those will come off eventually. Sorento Sinks do not have those coating as it is not required.

A normal coating is actually for cosmetic use, to prevent the sink from rust. A good sink do not require such coating.

A good coating something like rubber is to prevent water condensing at the bottom of the sink. This seldom occur if u r getting a reasonably good kitchen sink. You can check ur old sink to see whether u have this problem.


This post has been edited by zheilwane: Mar 28 2011, 12:24 AM

Granite sinks are beautiful and durable but very expensive, averagely around RM 1.5k
Here are the info u need
http://www.ehow.com/facts_7768922_advantag...nite-sinks.html

If you are looking for one, i do carry Elleci Granite Sinks. This model TEKNO 490 would look great in ur kitchen
Colour available :
1) AVENA 51
2) BIANCO 52
3) NERO 54

http://www.elleci.com/en/component/catalog...no/Tekno490/262

This post has been edited by zheilwane: Mar 30 2011, 11:51 PM

This, u can PM ryansia as he is using a 250mm(10 inches) depth undermount sink

Undermount
1) save space, as you do not have the outer ring.
2) As you do not have the outer ring, water, food and dirt are all inside the bowl instead of on the outer ring and you can clean it easily.
3) More beautiful but Expensive.

Double bowl or single bowl is actually depend on ur need & preference. If u have more space, get a double bowl. If ur space is limited, get a single bowl.

DOnt have much undermount sink model but this is my best seller.

Bought by Ryansia - http://forum.lowyat.net/index.php?showtopic=1761806&hl=






For Top Mount, can seriously consider SORENTO. THese are my best sellers





This post has been edited by zheilwane: Mar 30 2011, 10:26 PM

Actually originally the sinks do not have holes. If u decided to get a sink tap that comes out from the wall, then u do not drill a hole on ur sink. If u wan it to be installed on the sink, then u ask ur plumber to tebuk lubang.

If u r looking for beautiful Sink taps, would recommend u to install it on the sink. Hard to explain much here, you will need to drop by my showroom and have a look at the products for me to explain in more detail.

Btw, u can get any sink, then ask ur plumber to open holes for tap or soap dispenser

If u r looking for something good and not too big you can go for this.

Product Details
Product Code : SRTKS8801D
Category : New Arrival
Product Name : Double Bowl
Price : RM 1,xxx.00 (c/w chopping board & soap dispenser)
Material : Stainless Steel 304
Measurements : 825 x 455 x 220 x 1.2mm

Or something Big

Product Details
Product Code : SRTKS 2028F
Category : Kitchen Sink
Product Name : Double Bowl
Price : RMxxx.00
Material : Stainless Steel 304
Measurements : 1090 x 500 x 220 x 0.9mm

This post has been edited by zheilwane: Apr 1 2011, 10:53 PM

can, why not. For granite sink, u will need to let us know u wan to put a mixer or cold tap den we tebuk for u

The dimension is 820mm x 460mm x 250mm

Top mount can b used as undermount




For more details, u will need to drop by my showroom as discussed earlier ahhaha, my showroom minor reno has finally completed. So, how is ur survey at Perfect Living?

no problem. One of the forumer (happyday119) was kind enough to share some photos with me.



This post has been edited by zheilwane: Apr 5 2011, 08:55 PM

actually one piece or two piece, both are equally durable as long as the sink's thickness is more than 0.8mm. Some of sorento sinks are two piece and they are very durable. If the sink is thin like 0.6mm and you weld it, the joints will b thin and when u put heavy things on your sink, it cant withstand the weight. If u get a one piece sink and it is around 0.6mm, you will still have the same problem. One thing u can do, check the kitchen sink that u are currently using for your old house, most probably it is a two piece sink, i bliv it is still OK after so many years.

are you referring to this?


Where to get it : From me lo
Location : Map
Price & other promotions : PM me in Facebook
http://www.facebook.com/home.php#!/pro...100001245528914

This post has been edited by zheilwane: May 19 2011, 07:55 AM

That is sorento sink. Sorento items will increase by 10% next month. www.sorento.com.my

for more updates on price & promotions, please join us in facebook
http://www.facebook.com/home.php?flyingspaghettimonster=logo#...100001245528914

i do have some of those TORA sinks. Big, deep, cheap and with coating but mine is powder coating not sure whether it is the same as stacylv's. It will eventually come off a little and look ugly.

This model 1 Big + 1 Small bowl sold out d, i only have double bowl now. This sink does not have coating but it is 1.2mm thick and no condensation, quality approved by forumer "ryansia" hahahaha

This post has been edited by zheilwane: May 22 2011, 11:10 AM

Just wanna share something we discussed previously. Here are some photos of a sink with so called "insulation coating"



This post has been edited by zheilwane: May 23 2011, 02:53 PM