bro xxboxx need more monster upgrade d...
let 'stocknia' type exterior car cucuk mana boleh

how much roughly stroked 4G15 with high cams hp is?
The car got rear disc brake, so maybe is 4G92 or 93 SOHC/DOHC..
Still considering about cams, main concern is FC.



My exterior also almost stock.

Stroked 4G15 to 1.6 can get around 110whp or more depending on setup with cams and etc etc
Torque also increase to >135Nm on wheels

If you play cams, go for street ones like those 268/272 duration and you won't need to release your rev cut
Stock ECU can run on its own but to get more power out of the setup, e-manage + ACP will get the job done

I'm from Persona Club. Currently we having a Denso Iridium (IT20 & IK20) Spark Plug bulk purchase
Below is detail.
http://www.facebook.com/notes/drex-chan/li...276428539053095

For short story:
Denso Iridium Power Spark Plugs (IT20 & IK20 only)
Single set purchase: RM160
5 sets group buy: RM160 - 10% discount = RM144
10 setsgroup buy: RM160 - 20% = RM128
> 15 sets group buy:RM160 - 30% = RM112
INSTALLATION/DELIVERY = FOC!!
(Taken from Drex FB)

Dealing method from Drex Chan


Anyone who is interested pls pm.
PS: I'm not seller or work with EA autoworks, i'm just persona owner and help forumers to have discount to buy spark plug.Only this time!!!

This post has been edited by dorinyeah: Oct 6 2011, 08:35 AM

For my case. Change gb won't do anything. Unless I release the 'seal'. Then only the kyubi can go rampage. Haha

Yours still got speed cut?

hey sifu...can explain to me what is about cam?? anyway i am really tempted to try rev my car liao lah...hahaha...and wanted to mod on performance...hehe...please explain more about cam please...

tenkiu

http://en.wikipedia.org/wiki/Camshaft
http://www.howstuffworks.com/camshaft.htm

umm...my aeroback back seat...the button u need to pull up to fold the seat down is stuck...
whats the easiest way to access the lock?

Guys my rear bonet entering water la at the spare tires compartment..any1 can suggest the main culprit...haiz started to rust d...

Any suggestion?

This post has been edited by mivecwira: Oct 8 2011, 12:09 PM

Yes. Didn't remove it for my own safety. Hahaha

>200km/h is gooding YO!!

hahah.......

Hi all, is there anyone know where can i buy this connector?

Size is 1/8PT..... Thx much...

---

Added on October 7, 2011, 10:11 pmSo quiet....

This post has been edited by nelsonlye: Oct 7 2011, 10:11 PM

Try hardware shop lo. Those sell pneumatic accessories de.

hi guys....

I'm having problems with my car, a Wira A/B 1.3 vdo injection..

yesterday, i've sent my car to workshop due to the fuel pump failure...already change the pump & it cost me RM165 (fuel pump 115, labour 50), which surprisingly cheap since i expect to pay about RM300++ based on my reading in other forums..

The foreman manage to change the fuel pump the same day & the car was fine when i drive it to my home...prior to the changing of the fuel pump, the car was underpower & jerking in low rpm...

this morning, on my way to my office, the car suddenly vibrate at low rpm...firstly, when i change gear from 4 to 5, the engine suddenly vibrate..at that time my speed was almost hit 90km/h...

then the car starts vibrate each time the rpm drops when i change gear...pickup suddenly drop & reaching even 70km/h seems like forever...

when i reach my office, got out from the car, i smell some burn smell, apparently coming out from the engine compartment...i didn't manage to check the engine because i'm in a rush...

is it the fuel pump, or other parts of the car such as TB, spark plug or spark plug cable?

what do you guys think? i will bring the car to workshop this afternoon but maybe you guys have some opinion about my problems.

thanks in advance

Guess is the fuel pump doesnt sufficient enough for your engine..

Check the spark plug n cable. Make sure these are ok first. Then the fuel filter. Then fuel regulator.

hmm... How to know if fuel pressure regulator got problem??

Send to workshop and check....Cause u don't have the fuel pressure gauge...