u mean the shutter got stuck when shot in high SS?

should be a quick strike rite? wait let me check mine hehe

yeah test it out. try continuous high, then low and also single. doesnt happen everytime.try above 1/800 all the way to 1/8000. see if it shows Err

probably is the problem is caused by ur mc... may i know what class is it?? err shows on the display??

definitely not memory card. Err shows in the top lcd. i take out the lens n put to M mode also like that. get Err at random times but very frequently.

Hmm, might be an issue with your unit. My D700 does 1/8000 without issues. I've burst 8fps with it before too at 1/8000s.

does the dark picture has effect on shutter jam?


according to
http://www.dpreview.com/lensreviews/nikon_...g_n15/page2.asp
the filter size is 58mm

yeah....happens randomly during burst 6fps and also during single shots. happens at lower shutter speed too. weird thing is, the first few days i was using it with no problem. then kept it in the bag for 2 days, then today saw someone posted this http://nikonrumors.com/forum/topic.php?id=...es=5#post-51600

went to test my cam and prob happens.

1) which centre should i go...PKNS or berjaya times square?

2)of course i would like good service for my cam, fast and efficient.

3)how's the procedure like. how long would i need to leave my cam there?

---

Added on December 28, 2010, 5:55 pmdark could be because the shutter doesnt open. by dark i mean it is actually totally black. nothing at all. not the usual underexposed dark u get when your shutter speed is too fast for ambient light.

This post has been edited by fisherman10: Dec 28 2010, 05:55 PM

I don't know about that.
but there is one time I did burst mode w/ my body *just for testing* (in this case the lens cap is closed).
it worked fine.

yeah well, maybe your unit is ok.

mine when i burst, i just hold the button, sometimes it'll stop after a few and show Err. sometimes it'll stop at the first or 2nd shot.

and when i check the playback....all the shots that i heard click properly, the image shows but the last image just before it stop and show Err is black. totally black.

go straight to pkns pj la... u send to BTS also, sometimes they send to PJ also...

if under warranty and the parts is ready(if should to replace anything) the fastest i get back my stuff is the next day.. believe it or not...

thanks. so i need to bring my warranty card right? do i need the receipt?

will the camera be affected in other areas after sending to them? i was worried like after they open up everything and put it back together, maybe the glue for the rubbers or the screws might not be as good as new. is that possible?

Nobody reply my question =(

Why dont you just give them a call?

They wont lar . I wwent there twice for my cousin lens and my camera body . So far no problem also

i just tried letting go two roughly 10-shot bursts at 6fps 1/800s on my d7000.
no problems here.

try higher. try 1/8000. at first i tried it had once or twice stuck. then i remount the lens, still once or twice. then i mange to really burst kaw kaw at 6fps with no problem for a while....then after that, now it's frequently like that. even for single shot or continuous low at 3fps.

see this - http://nikonrumors.com/forum/topic.php?id=3044

try pointing at something bright and see whether it open and closes in time.

that one is not bursting at 1/8000, just single shots.
u said urs happens at 1/800 bursts.

okokok lemme explain.

it happens frequently and randomly. whether it's burst at 6fps, burst at 3fps or single shot. it gives me the Err intermittently at various shutter speeds once the err comes out, i off it, take out the lens, i can see that the mirror is flipped up and the shutter is covering the sensor. i then have to on back, press the shutter again then only the mirror will drop. but before i take out the lens, i can see the image review that it's all black.

mine doesnt have the black line at the top or bottom like the link i posted. but u read what the TS said, he also had intermittent Err probs with the mirror/shutter jamming.

---

Added on December 28, 2010, 7:06 pmthe funny thing is, i used the cam quite a lot, more than 1k shots as it went to the 2nd folder on my memory card since i got it. nothing happened, went to klcc, icity, church event and all no prob.

until just now, decided to test fast shutter speed. after 2 shots, gave me Err. and then now it keeps on happening quite frequently. i would say once every 3 shots on average.

This post has been edited by fisherman10: Dec 28 2010, 07:06 PM

ok when the time comes that i need 1/8000s is when i will try it

tested mine with 1/8000s turns out fine. Pointed at the bright subjects.