QUOTE(Have_nice_day_guy @ Feb 14 2011, 07:18 PM)
...Can anyone post working settings, sorry, I'm really new to this and hope everyone can help me, I just need this WR1043ND to connect to Unifi...
Have you tried to unbridged both vlan2 & vlan2.500 as per your previous photos?
As I don't have a 1043ND with me now and I have no idea what you have done, please do a hard-reset first, then go straight to:
Setup --> Networkingunder
Port Setup section, check what's on the
WAN Port Assignmentand follow this guide to setup vlan.500 for internet:
http://klseet.com/index.php?option=com_con...id=15&Itemid=14QUOTE(charymsylyn @ Feb 14 2011, 10:06 PM)
... large file transfer speed of about 20-22Mbps. This is an Aztech N150 USB adapter located ~10m away from the router with a concrete wall in-between ...
20~22Mbps = 2.5~2.8MB/s
either you've set it as NG-mixed or wall too thick or time to consider another USB dongle ....
QUOTE(AMDAthlon @ Feb 14 2011, 10:18 PM)
Ok..talking about transfering files between Network,while i always get speed less than 3MB/s?
Sometimes can even slower which is around 1MB/s?
Is it related with network or what?If yes how to improve the speed?
Wifi thing very complicated & complex ...
My personal experience & testing findings:
- Atheros or Broadcom seem to have better signal & stable than Ralink; I personally prefer Atheros at the moment
- if confirm no other B or G devices to connect, then may consider to setup N-only mode, prefer to use channel 6 with max 40mhz width upper channel 11, security use WPA2+AES
- try to place the wifi away from electronic items, not too near TV/Astro area, place on higher level without any heavy metal or concrete wall blocking
- try to use same chip maker whenever possible, especially bridging 2 wifi
Again, physical situation varies, really need to test to find the best location & signal

QUOTE(BlackDoMiNiC @ Feb 15 2011, 01:09 AM)
already done with the setting up of 841 !! so far has been up for 5 hrs 25 min = ).. no problems with zte yet, hopefully never..
thanks for ur help and guide...

Good to hear that, enjoy your UniFi gao-gao !!
This post has been edited by klseet: Feb 15 2011, 01:21 AM