http://www.techwarelabs.com/amd-athlon-ii-...pu-processor/2/

guys, look at this review..
the guy overclock the pc by increasing also PCIE to 111Mhz...
Isn't that increasing PCIE will cause system to be unstable?

i think 111 still safe.. coz alot using that range..

so u guys here did increase PCIE to around that value?
i've forgotten what will tat effect?
mind to help me recall?

Guys...

ATI Catalyst already came out with new Drivers 10.10c Hotfix....

10.10c Hotfix

This post has been edited by verdict: Nov 3 2010, 09:17 PM

lol i thought it long time edy released..
5850 price tempting ler..

aik this is Cpu OC thread.. i'm i right?

Seldom update my driver...im just sharing...my bad then...

5.5Ghz screen short on 3Dmarks06 @ -190c



This post has been edited by verdict: Nov 3 2010, 09:35 PM

This is what u call ur so-so oc?? I already malu with my oc comparing to urs

Yo bang oltromen...5.5Ghz is on LN2 ler...mana boleh compare w/ air cooling...

I didnt manage to push it more futher due to mobo behaviour is hard to predict~ at those run, i suppose to bump the NB speed till 4.5Ghz...

My 790FX have cold boot issue at -170, so no score on other 3D benchmark...

This post has been edited by verdict: Nov 4 2010, 09:19 AM

corrected sir...

nicely done bro, this is d 1st time is see our lads dis cpu score > 10k... job well done...

d most i can squeeze outta my poor chip is 8k @ 4.25/4.3GHz only...

i lagi malu leh bro... 3850cf really can't make it... but very soon... there'll be a minor change...

as for d ram, what's d setting that give u tonnes of errors bro? if 1600 @ cas8 oso got problem then courier pos lambat it to me ledi... who know's u'll receive eco 1333 in return???

seriously, u need a 890fx bro... ur hard core so 7xx series should be history for u by now... time to CHIV?

This post has been edited by ah_khoo: Nov 4 2010, 10:37 AM

Huhuhu, i was just only using 17xx @ cas 8 but with ram volt at 1.57v
But last nite i adjusted a bit, upped the ram volt to 1.6v then did memtest it was ok plak, b4 this there was no prob running below that

I agree with u bro, verdict has to go for the kill, 890FX FTW!!!

This post has been edited by cloudwan: Nov 4 2010, 11:18 AM

My HD5850 reserve for you?? Need to make way.

1090T price drop!! What is the price in KL now? ~RM700?

This post has been edited by louislkw: Nov 4 2010, 11:38 AM

Just came back from lowyat during lunch time...

Here the latest pricelist for 1090T :

Viewnet - RM914***

PC Zone - RM960

Cycom - RM948

C-Zone - RM955

Thundermatch - RM923

Sri Computer - RM950

at viewnet there sure must buy bundled with..

owh.. i tot 111 is the max can-be-called safe clock.. means near not safe.. so max i only put 110.. often run 105 and normally run with 103mhz only..kekeke

@ah khoo..
still with 3850cf? ur wasting ur electric bill unker.. go for single bodoh card with no 6-pin power
u not good in tweaking OS..but veli2 good tweaking ur system..

@verdict
wah..play2 LN2.. shiok eh?

can.. max 115.. but the thing is.. 16x already fast la.. why bother to increase..
unless u really stuck @ 8x..

it's like cyberjaya with 7 lanes and only 1 car using it.. muahaha..

oic..since last time i read it can be around 111 value..so i never put 111..max and very2 seldom put 110..
well.. that is not to increase Gc performance.. just to push HTT higher..

uit it's bound to the HTT? can set separately right..

maybe nowadays the parts are more robust..
IIRC last time even touch the pci bus for 1mhz increment.. will coz instability issue and worst can damage the HDD..

better not touch it for the unproven performance.. stay safe..

verdict rich guy yo~

he look at the pricelist, which one got FX in it, he straight buy~

me only use 100mhz only, sked to kill my sata~

Not so fast reflect here probably as the price control by some "dumbies" distributor..

what to do.. they need to clear their old stock..